Family Owned & Operated Since 1971• Bakersfield, CA
Multimeters, clamp meters, insulation testers, circuit testers, and electrical safety equipment
1810 product families(3930 total products)
Loop Calibrator, 0.03%RD
Loop Calibrator, 0.01%RD
Multifunction Process Calibrator, ADT226, Temperature and Pressure
Multifunction Process Calibrator, ADT226EX, Temperature and Pressure, ATEX Certified Intrinsically Safe
Multifunction Process Calibrator, ADT226P, Temperature And Pressure, Panel Mount Configuration.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
9 modelsClick to compare & select →
5 modelsClick to compare & select →
Clamp multimeter with leakage-current capability — measures low AC current down to the microamp range for fault- and leakage-current work, plus AC current to 60 A, AC voltage to 400 V, resistance, and continuity.
Check out the latest handheld non-contact infrared thermometers, temperature test tools, probes & accessories designed for a range of applications.
3 modelsClick to compare & select →
3 modelsClick to compare & select →
Dual Display 600 a TRMS Clamp Multimeter
2 modelsClick to compare & select →
TRMS 400A Swivel Clamp w/Temp and Capacity
The Extech 380926 is a category IV, 2000-Amp, TRMS AC/DC clamp meter with a rugged 2 in. jaw to accommodate two 500 MCM cables. A built-in full-function DMM can measure AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, diode and continuity. Measurements are displayed on the large 4000 count backlit display for easy viewing in dimly lit areas. Additional features include DCA push button zero, Data Hold, and Relative function. Complete with test leads and 9V battery.
The compact Extech 380941 is a 200 Amp mini AC/DC clamp meter with a small diameter jaw designed to reach in small areas while providing 10mA resolution (DC) and very low-current sensitivity. This mini clamp meter is useful for troubleshooting tasks in plant maintenance, electrical, HVAC, and telecom work, as well as home electrical, fleet maintenance, marine, and motorcycle repairs. The 380941 has a CAT III 300-Volt safety rating and a one year warranty. Comes with batteries and manual.
2 modelsClick to compare & select →
The compact Extech 380947 is a 400 Amp True RMS mini clamp meter. This meter has a small diameter jaw designed to reach in small areas while providing 1mA resolution and very low-current sensitivity. This mini clamp meter is useful for current and frequency related troubleshooting in plant maintenance, electrical, HVAC, and telecom work, as well as home electrical, fleet maintenance, marine, and motorcycle repairs. Comes with battery and manual.
The compact Extech 380950 is a mini AC/DC clamp meter. The 380950 has an extra-small diameter jaw designed to reach into very small areas while providing a 1 mA resolution and very low-current sensitivity. This amp clamp performs essential troubleshooting tasks in plant maintenance, electrical, HVAC, and telecom work as well as residential, automotive, fleet maintenance, marine, and motorcycle electrical repair. Complete with test leads, two 1.5V AAA batteries and carrying case.
2 modelsClick to compare & select →
The 382357 is a Clamp-On Ground Resistance Tester that enables non-contact measurements of ground conductors. True RMS AC Leakage current range of 0.2mA to 30A with 1.000mA resolution. Programmable Datalogging with 116 data points. Performs without the need for auxiliary spikes. Complete with 9V battery, Resistance check plate and durable metal storage case.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
The MA120 is a 200 Amp AC/DC mini clamp meter with built-in AC voltage detector and built in LED flashlight. The meter measures Frequency up to 1 kHz with 0.01Hz resolution, auto ranges with auto power off and data hold functions. Complete with a year warranty, 2 AAA batteries and soft case.
The MA1500 is a 1500A True RMS AC/DC Clamp Meter. 2.0 in. (52mm) jaw size for conductors up to 500MCM with True RMS for accurate readings of non-sinusoidal waveforms. Additional features include: Relative Mode for Capacitance Zero and Offset Adjustment, Data Hold, Peak Hold, MIN/MAX, Auto Power Off, and Inrush function to capture transients during motor startup. Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case.
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!
The MA63 is an AC/DC current clamp with NCV voltage detector and full overload protection. Manual ranging clamp meter with three Current ranges and AC/DC voltage to 600V. The 6000mA range allows for low current measurements that may be used in the automotive industry. Unique VFC (variable frequency control) mode helps troubleshoot and diagnose HVAC applications that are variable frequency driven. The MA63 also features resistance, capacitance, frequency, diode and continuity measurements as well as data hold low battery indicator, and auto power off functions. Complete with test leads, carrying case, and two AAA batteries.
The PQ2071 is a 1-/3-Phase 1000 Amp True RMS AC Power Clamp Meter. Extech's multifunctional PQ2071 Power Clamp meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector. Featuring a CAT IV-600 Volt safety rating, the PQ2071 measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power. Measures 1-Phase and balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh), plus Power Factor and Phase Angle. Featuring a 2.16 in. (55 mm) clamp jaw opening. Large dual backlit LCD display (9999 count) with bargraph. Frequency measurements to 200Hz. manually store/recall up to 99 data sets. Data Hold, Max/Min, and Auto power off functions. USB interface for connection to a PC for data logging function with included software. Complete with test leads, four color-coded leads and alligator clips, USB cable, PC software, 9V battery and soft case.
Explore the Flir CM276 clamp meter – a versatile tool integrating thermal imaging and electrical measurement for effective inspection of electrical systems, solar panels, and more. Its Infrared Guided Measurement (IGM) feature ensures safe identification of hot spots and overloaded circuits. With Meterlink app compatibility, enjoy efficient data capture and sharing of readings, images, and videos for comprehensive analysis and trending.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
The slim and thin jaw can easily fit into tightly packed wires. The lightweight and compact design allows you to carry it around in your pocket
The slim and thin jaw can easily fit into tightly packed wires. The lightweight and compact design allows you to carry it around in your pocket
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Versatile and rugged for high currents up to 2000A AC/DC. Extra wide jaw easily clamps around large conductors found in high-current applications.
Fluke 365 AC clamp meter has a thin, small jaw with a flexible lead, so gaining access to wires and viewing the display is easier than ever.
The Fluke 368 true-rms leakage current clamp meter helps you detect, document and compare leakage current readings over time without taking equipment off line.
The Fluke 369 FC leakage current clamp meter offers wireless data recording and trending for preventive maintenance, without taking equipment offline.
The Fluke 374 FC offers advanced troubleshooting performance & is now part of the Fluke Connect family of wireless tools. See our line of DC clamp meters.
2 modelsClick to compare & select →
The Fluke 376 FC Wireless True-RMS Clamp Meter offers measurements up to 1000V & 1000A, AC or DC, plus an included iFlex Flexible Current Clamp. Learn more
Measure voltage and current with the clamp jaw of the Fluke 377 FC true-rms FC clamp meter with iFlex. Get Fluke 377 FC price, manual, reviews, how to use and specifications.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Fluke TLPV1 MC4 to 4mm Test Lead Set ensures safe PV measurements with Staubli MC4 connectors, CAT III 1500V. Ideal for maintenance and troubleshooting.
393 FC solar clamp meter measures up to 1500 V dc, 1000 V ac, IP54 rated, CAT III. Ideal for PV installation, solar PV arrays, electric railways and data centers.
I1A/10A Clamp PQ3 3-Phase 1A/10A
The i200 is a single range 200A ac current clamp with current output via safety shrouded banana plugs
2 modelsClick to compare & select →
The Fluke a283FC True-RMS CAT III 1500V Wireless Current Clamp simplifies troubleshooting without compromising on safety and reliability.
A fully functional true-rms current clamp meter that wirelessly relays measurements to other Fluke Connect enabled master units
2 modelsClick to compare & select →
AC/DC Current Module That Wirelessly Relays Measurements from Current Clamp Accessories to Other Fluke Connect Enabled Master Units
The a3003 FC wirelessly relays measurements from current clamp accessories to other Fluke Connect enabled master units.
The a3004 FC Wireless DC Current Clamp Meter is a fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect enabled master units.
The Fluke i1000s is a clamp-on AC current probe designed to expand oscilloscope applications in industrial and power environments.
Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.
Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.
2 modelsClick to compare & select →
The TLPV2 Solar Clamp Test Lead Set ensures accurate, safe DC power measurements on PV systems, featuring reliable Staubli MC4 connectors for easy troubleshooting.
9 modelsClick to compare & select →
Compact DMM w/NCV and Logic Test
Compact DMM with Temp, Freq, Capacitance
Prof DMM True RMS W Component Logic Test
Prof DMM True RMS W Optical PC Interface
Prof DMM True RMS W Temperature & Backlight
Prof DMM W Non-Contact Volt Tester
Prof DMM W Temp and Capacitance
The Extech 381676A is a Pen Styled Multimeter with a Built in NCV detector. The 381676A features nine functions including AC/DC voltage to 600V, AC/DC Current to 200mA, Resistance, as well as Logic, Diode and Continuity tests. This meter has an easy to use rotary dial with alligator clips for one handed operation. Its convenient built in non-contact voltage detector allows for quick detection of live voltage. The 381676 comes complete with test leads, alligator clips, batteries and manual.
The Extech DL150 is a True RMS AC Voltage and Current Data Logger. Data log up to 100,000 readings of TRMS AC Voltage (600 Volt) or Current (200 Amp) with a user programmable sample rate from 1 second to 24 hours. LCD displays time/date, current reading, min/max, and if the user settable high/low alarms have been exceeded. Readings can be downloaded to your PC via the USB interface. Featuring normal, peak, and capture (user specified trigger level) recording modes. Complete with current clamp, test leads, alligator clips, software, USB cable, 110-Volt AC Adapter, and four AAA batteries.
This Mini Pocket MultiMeter has a large high contrast 4000 count LCD display, Non-Contact Voltage detection for identifying live circuits, and a built-in Flashlight. It measures AC/DC Voltage, AC/DC Current, Resistance, Frequency, Duty Cycle, Diode Test and has a Continuity Beeper. Additional features include: built-in storage clips for integrated test leads, double molded housing to provide extra protection, over-range and low battery indication. Complete with test leads and 2 AAA batteries.
The Extech EX310 is a compact manual ranging multi meter which features an extra-large 2000 count display and built-in non-contact AC voltage detector (NCV). AC/DC Voltage & Current, Resistance, Diode/Continuity measurements. Includes a battery test function (1.5 Volt and 9 Volt). The rubber holster protects the meter. UL listed Cat III – 600 Volt safety rating. Includes test leads, 9 Volt battery, and tilt stand.
The EX330 is a compact autoranging multimeter which features extra large 4000 count display and a built-in non-contact AC voltage detector. Advanced function include Frequency, Duty Cycle, Capacitance and Temperature, Diode test and continuity. Rubber holster protects meter. Includes test leads, Type K temperature probe, two AAA batteries and tilt stand.
The EX350 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring distorted or noisy waveforms. Built-in Non-Contact AC Voltage Detector quickly checks for the presence of AC Voltage before testing. Features a 4000 count LCD display, data hold, min-max, relative mode, capacitance zero, auto power off, continuity and diode test. This meter will measure AC/DC voltage to 600 V and AC/DC current to 10 amps. Complete with test leads, manual and two AA batteries.
The EX355 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring distorted or noisy waveforms. Built-in Non-Contact AC Voltage Detector quickly checks for the presence of AC Voltage before testing. Features a 6000 count LCD display, data hold, min-max, relative mode, capacitance zero, auto power off, continuity and diode test. This meter will measure AC/DC voltage to 600 V and AC/DC current to 10 amps. Complete with test leads, general purpose bead wire temperature probe, manual and two AA batteries.
Compact and powerful, the Extech EX410A Eight-Function True RMS Professional MultiMeter provides the versatility of multiple meters in one convenient device. The EX410A measures AC/DC voltage and current, resistance, diode, and temperance. A large, backlit display and 1-inch high digits allow for easy reading, while the ergonomically designed housing offers comfortable, one-handed operation. Comes with Multimeter, CAT III test leads, stand, hanging strap, holster with built-in test lead storage, Type K bead wire temperature probe, and battery.
The Extech EX430A True RMS autoranging Multimeter (with K Type, capacitance, frequency, and duty cycle) is a professional-grade multimeter capable of performing a wide range of measurements. Functions include AC and DC voltage to 600 V, AC and DC current to 10 A, resistance to 40 MOhm, continuity, and diode test. It also includes a Type K thermometer function for contact or air temperature measurements from -20°C to 750°C (-4°F to 1832°F). Advanced functions include capacitance, frequency, and duty cycle. This meter comes complete with test leads, Type K temperature probe, 9 V battery, protective holster, adjustable tilt stand, and a velcro hanging strap.
Laser. The Extech EX470A True RMS Multimeter and Infrared Thermometer with capacitance, frequency, and duty cycle measurements and 2 Type K remote probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures surface temperature from -20°C to 270°C (-4°F to 518°F) without contact. The built-in laser pointer centers the measuring area. Its functions include AC and DC Voltage to 600 V, AC and DC current to 10 A, resistance to 40 MOhm, continuity, and diode test. It also includes a Type K thermometer for contact or air temperature measurements from -20°C to 750°C (-4°F to 1832°F). The meter comes complete with test leads, 9 V battery, protective holster, adjustable tilt stand, and a velcro hanging strap.
NIST-No IR Function. The Extech EX470A True RMS Multimeter and Infrared Thermometer with capacitance, frequency, and duty cycle measurements and 2 Type K remote probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures surface temperature from -20°C to 270°C (-4°F to 518°F) without contact. The built-in laser pointer centers the measuring area. Its functions include AC and DC Voltage to 600 V, AC and DC current to 10 A, resistance to 40 MOhm, continuity, and diode test. It also includes a Type K thermometer for contact or air temperature measurements from -20°C to 750°C (-4°F to 1832°F). The meter comes complete with test leads, 9 V battery, protective holster, adjustable tilt stand, and a velcro hanging strap.
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
The Extech EX800 ExStik 3-In-1 Kit includes the CL200 meter and pH electrode, reagent tablets (50 tests), four plastic cups, a weighted stand, pH buffer pouches, four CR2032 batteries, 121.9 cm (48 in) neck strap, carrying case, and user manual. The meter measures total chlorine, pH, and temperature with interchangeable flat surface electrodes that are included. Flat surface electrodes work in liquids, semi-solids, and solids. The built-in memory can store and recall up to 15 readings and save the last calibrated value. It has a large 3.5 digit (2000 count) digital display with a bargraph and an automatic electronic self-calibration function for chlorine (1, 2, or 3 point buffer calibration for pH).
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Combines a portable 20GΩ/1000V Insulation Tester with a True RMS MultiMeter. Insulation tester includes PI/DAR modes, programmable timer, and a comparator for custom test configurations and quick results. Multimeter functions include AC/DC Voltage, Resistance, and Continuity Test. Manually store/recall up to 99 readings. Designed with rugged housing and large backlit 6,000 count LCD display with analog bargraph. Complete with test leads, alligator clip, 6 x AA batteries, and soft case.
The MN35 is a convenient mini size multimeter with protective rubber holster and tilt stand. Manual ranging, measures AC and DC Voltage to 600V, Resistance with Continuity and Diode functions, DC Current to 10A, Temperature, and 9V/1.5V Battery test. Includes protective rubber holster, 9V battery, test leads and Type K thermocouple probe.
The Extech MN36 digital multimeter is compact but still packed with features. Capable of measuring AC and DC voltage up to 600 volts, the MN36 is autoranging, which means it automatically displays readings with the proper decimal place location and maximum resolution. Comes with protective rubber holster, 2xAAA batteries, bead wire Type K temp. probe and test leads.
2 modelsClick to compare & select →
The DM66 digital multimeter is ideal for automation field service or electronics technicians, providing a comprehensive feature set including low impedance (LoZ) mode, frequency, diode, capacitance, and a Type K thermocouple input for temperature measurement. The multimeter combines rich features, precise measurements, and quality construction into a tool of exceptional value. Easy to use and built to last, the DM66 offers long-term stability for everyday use.
2 modelsClick to compare & select →
Enhance your toolset with the BK120 breaker finder and 107 digital multimeter (DMM). The perfect pair for circuit identification and electrical measurements.
The Fluke BK120 circuit breaker finder tool simplifies electrical troubleshooting. Identify circuits to save time and enhance safety at home or work.
9 modelsClick to compare & select →
The Fluke 177 True-RMS Digital Multimeter delivers precision, reliability, and ease of use for professional technicians. Safety rated CAT IV 600V / CAT III 1000V.
2 modelsClick to compare & select →
Basic DMM for ESP w/Temperature, CAT III
Basic DMM w/Temperature, CAT III, Retail
3 modelsClick to compare & select →
The Fluke 283 FC is a CAT III 1500V / CAT IV 1000V True-RMS digital multimeter with Fluke Connect wireless capability for remote monitoring and data logging.
2 modelsClick to compare & select →
3 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
The Fluke 83V Average-Responding Industrial Multimeter provides the features, precision, and ruggedness needed for demanding industrial and field service applications.
The Fluke 87V MAX multimeter contains all the trusted features of the popular 87V, plus IP67 Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster and more.
8 modelsClick to compare & select →
2 modelsClick to compare & select →
Click to compare & select →
Cable (5M) for DO600 with Probe Weight. The Extech EX050 is an ExStik 16 ft. Extension Cable with Probe Guard/Weight. For use with the Extech DO600 Waterproof ExStik II Dissolved Oxygen Meter.
5 modelsClick to compare & select →
9 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Durable circuit breaker tester for powered systems from 90 to 120V AC. Identifies circuit breakers fast with automatic sensitivity adjustment and microprocessor-controlled accuracy.
Milliohm Meter, 4-Terminal, 200 Mω to 2000 Ω, Battery Powered
CAT IV 1000V rated non-contact voltage probe with IP65 rating, magnetic sensor for motor monitoring, and built-in LED flashlight.
Residential electrical test kit bundling the AM-420 Digital Multimeter, ST-102B Socket Tester with GFCI, and VP-1000 Non-Contact Voltage Detector — with batteries — for voltage, current, resistance, capacitance, outlet-wiring, and RV-pedestal checks.
Verifies motor rotation and 3-phase receptacle wiring. Wireless motor rotation detection without test leads, plus traditional phase sequence verification with leads up to 700V.
3-Phase Motors Troubleshooting Kit w/ Multimeter and Clampmeter
Compact pocket-sized AC/DC voltage tester for quick electrical troubleshooting.
GFCI receptacle tester for quick verification of outlet wiring. Tests for open ground, open neutral, open hot, hot/ground reversed, and hot/neutral reversed conditions.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
8 modelsClick to compare & select →
2 modelsClick to compare & select →
The Fluke 1LAC-II is a pocket-sized non-contact voltage tester that detects low AC voltage from 20 to 90V with visual and audible indicators.
3 modelsClick to compare & select →
2 modelsClick to compare & select →
Use the Fluke 9040 to measure phase rotation in areas where three phase supplies feed motors, drives and electrical systems. Rapid determination of phase sequence and ideally suited for commercial and industrial applications.
The Fluke BK120 circuit breaker finder tool simplifies electrical troubleshooting. Identify circuits to save time and enhance safety at home or work.
6 modelsClick to compare & select →
2 modelsClick to compare & select →
The Fluke PRV240 is pocket-size proving unit that allows you to easily and safely verify that your multimeters, clamp meters and voltage testers are functioning correctly for AC and DC voltage measurements.
Verify that your T6 electrical tester or multimeter are operating properly before you conduct any live tests.
The Fluke ST120 GFCI Socket Tester checks that each wire in the outlet is properly connected to the building's electrical system.
The Fluke T110 is a two-pole voltage and continuity tester with switchable load for testing voltages up to 690V AC/DC. Rugged design for everyday electrical testing.
The Fluke T130 is a two-pole voltage and continuity tester with LCD readout and switchable load for testing voltages up to 690V AC/DC.
Two-pole voltage and continuity tester with LCD readout and ohms measurement. LED, LCD, audible, and vibration indicators. Switchable load for detecting ghost voltages. IP64 rated.
3 modelsClick to compare & select →
The Fluke T90 is a two-pole voltage and continuity tester for quickly checking voltage presence up to 690V AC/DC. Slim, rugged design with LED indicators.
A fully functional AC voltage meter that wirelessly relays AC voltage measurements to other Fluke Connect enabled master units
A fully functional DC voltage meter that wirelessly relays DC voltage measurements to other Fluke Connect enabled master units
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Regulator Neutral Detector
Wireless Phasing Meter
Regulator Neutral Detector
3 modelsClick to compare & select →
LED cable tester for opens, shorts, and miswired data-cable installations — verifies RJ45 and BNC cable wiring with a quick go/no-go display, and tests installed cable up to 300 m using a remote termination module.
Replacement main test cord for Fluke 1660 series multifunction installation testers. North America version.
Test lead accessory kit specifically for wire and circuit tracing and troubleshooting applications.
3 modelsClick to compare & select →
A604510350, Ground/Earth Earth Stake
Click to compare & select →
Voltage Phasing Meters Key Features: • 2 Models to Choose from - Digital and Analog
15 modelsClick to compare & select →
Fluke 1503 insulation resistance testers are not your typical insulation resistance meters. They are rugged, compact, reliable & ideal for troubleshooting.
2 modelsClick to compare & select →
The Fluke 1535 and 1537 high-voltage insulation resistance testers and megohmmeters are engineered for precision, safety, and comprehensive electrical diagnostics.
The Fluke 1535 and 1537 high-voltage insulation resistance testers and megohmmeters are engineered for precision, safety, and comprehensive electrical diagnostics.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
Advanced electrical troubleshooting kit combining the 1587 FC insulation multimeter, 62 MAX+ infrared thermometer, and i400 AC current clamp — everything needed for insulation testing, temperature scanning, and current measurement in one package.
2 modelsClick to compare & select →
Clamp-on ground resistance tester for non-invasive ground rod testing. Measures ground resistance 0.025 to 1500 ohms and leakage current up to 35 A without disconnecting the ground system or driving auxiliary stakes.
Dig Megohmmeter, Insulation Resistance Tstr
This autoranging megohmmeter measures insulation resistance up to 2000MΩ. Choice of 250,500 or 1000VDC test voltages. The large backlit dual display indicates test voltage output and insulation resistance. Low resistance, continuity and AC/DC voltage measurement functions. Other features include automatic discharge at the end of test, protective holster with stand, power lock on feature and data hold. Complete with test leads, carrying case and 6 AA batteries.
The Extech 380320 is an Analog Insulation Tester with a large, easy to read analog display. It features a live circuit warning which displays the actual AC voltage measurement. It also includes an automatic discharge circuit, lock power on feature for extended test times, and insulation resistance up to 400 MΩ. Complete with heavy duty test leads, alligator clip test lead, 6 AA batteries, hanging strap, and hard carrying case.
With the Extech 380395, measure insulation resistance up to 60 GΩ with test voltages of 500 V, 1000 V, 2500 V, and 5000 V. Its features include polarization index measurement (PI), dielectric absorption ratio measurement (DAR), AC/DC voltage measurement up to 600 V, peak and relative functions, and a 1 min to 15 min timer function for IR measurements. Comes with test leads, eight C batteries, 120 V AC adaptor, heavy duty carrying case, and a user manual.
With the Extech 380396, measure insulation resistance to 60 GΩ with test voltages of 500 V, 1000 V, 2500 V, and 5000 V. It features several measurements including polarization index (PI), dielectric absorption ratio (DAR), and AC/DC voltage to 600 V with a min/max function. It also has peak and relative functions, as well as a 1 to 15 minute timer function for IR measurements. Comes with test leads, eight C batteries, 220 V AC adaptor, heavy duty carrying case, and user manual.
The Extech 380400 Resistance Decade Box is very popular for product design testing and calibration because it can be substituted into a circuit and function in the place of any component with a standard value easily. Alternatively, it can be used to identify the best value for circuit operation then read that value from the switches. Then, a resistor of the size indicated by the decade box switches can be put into the circuit.
The Extech 380405 Capacitance Decade Box is very popular for product design testing and calibration because it can be substituted into a circuit and function in the place of any component with a standard value easily. Alternatively, it can be used to identify the best value for circuit operation, then read that value from the switches. A capacitor of the size indicated by the decade box switches can then be put into the circuit.
High accuracy and performance for low resistance measurements. Portable milliohm meter provides resolution to 0.1mΩ. Compact, durable field service housing with protective cover. Manual zero display adjust and overrange indication. Complete with 4-wire cables with Kelvin clip connectors.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Compact and precise, the Extech 380562 Milliohm Meter has 7 ranges and measures down to 0.01 mΩ using 4-wire Kelvin clip test leads. Measurements are displayed on the unit's large 20.3 mm (0.8 in), 1999-count LCD. It comes with a built-in comparator for Hi/Lo/Go resistance testing or selection. Complete with 4-wire cables with Kelvin clip connectors and power cord.
2 modelsClick to compare & select →
The 382252 is an Earth Ground Resistance Tester Kit which includes all hardware necessary to measure earth ground in 3 ranges from 20 to 2000 Ohms. Also tests AC/DC Voltage, resistance and continuity. Featuring Automatic zero adjustment and three earth ground resistance ranges 20Ω/200Ω/2000Ω. Complete with test leads, 2 auxiliary earth bars, carrying case, protective rubber holster and six 1.5V AA batteries.
The MG310 is a Compact Insulation Resistance Tester which allows quick and easy testing/troubleshooting of motors, transducers, and other industrial appliances. Wide range measurement up to 1000V with Insulation Resistance to 5.5GΩ. Includes an easy snap on protective hard cover and soft pouch to conveniently transport your meter and accessories to the next job site or to safely store away. Featuring Low Resistance measurement with Zero function, Continuity beeper, Large 2000 count dual display with backlight, High voltage and overload indication, Auto-discharge and voltage output warning functions as well as Low battery indication. Complete with test leads, alligator clips, 6 x AA batteries, hard cover, and soft carrying case.
The MG500 is a digital high voltage insulation tester that tests voltage up to 10kV and measures insulation resistance to 500GOhm. The MG500 has a CAT III 300 Volt safety rating. This product is complete with a year warranty, built-in heavy duty carrying case with cover, test leads, alligator clips, and 8 x C batteries.
The Extech 382100 is a 3-Phase Power Analyzer/Datalogger that saves data (up to 30,000 sets of measurements) on an SD card in Excel format for easy transfer to your PC. It provides a full system analysis with up to 35 parameters including: V (phase-to-phase), V (phase-to-ground), A (phase-to-ground), KW / KVA / KVAR / PF (phase), KW / KVA / KVAR / PF (system), KWH / KVAH / KVARH / PFH (system), and Phase Angle. Readings are displayed on a large, dot matrix, sun-readable, backlit LCD. It comes with three current clamps, four voltage leads with alligator clips, eight AA batteries, SD memory card, Universal AC adapter (100 to 240 V), case, and user manual.
The Extech PQ3350-1 is a 3-Phase Power & Harmonics Analyzer capable of up to 52,428 single phase readings or 17,476 3-phase readings. It includes a large backlighting LCD displays up to 35 parameters in one screen, and allows for the simultanious display of harmonics and waveform. For single and 3-phase/3-wire or 3-phase/4-wire systems. Complete with 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case.
The Extech PQ3350-3 is a 3-Phase Power & Harmonics Analyzer capable of up to 52,428 single phase readings or 17,476 3-phase readings. It includes a large backlighting LCD that can display up to 35 parameters in one screen, and allows for the simultanious display of harmonics and waveform. For single and 3-phase/3-wire or 3-phase/4-wire systems. Complete with 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case. Current Probes sold separately.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Entry-level power and energy logger with SureStart connection checking and Bluetooth communications. Ships with voltage leads, wall charger, and PSM-A Windows software.
Handheld power analyzer for load studies and energy audits: logs voltage, current, power, power factor, and energy. 1,000 V CAT III. Ships with deluxe voltage leads, wall charger, and PSM-A Windows software.
Power quality analyzer with swell/dip and inrush capture, harmonics analysis, and Bluetooth communications. 1,000 V CAT III. Ships with deluxe voltage leads, wall charger, and PSM-A Windows software.
Flagship power quality analyzer: 1,000 V CAT III, color graphics display, swell/dip and 8-microsecond transient capture, harmonics to the 63rd, Bluetooth standard, and redundant SD storage. Ships with voltage leads, charger, and PSM-A software.
The Extech PQ1000 is a CAT IV Test Lead accessory kit For PQ3400 series power analyzers. It includes a set of 4, 3 m (10 ft) test leads (black, red, blue, yellow) with shrouded banana plugs on both ends (right angle on one end). Includes test probes, alligator clips, and long reach spring loaded clips.
The Extech PQ3220 is a set of 3000 Amp flex clamps (set of 3) for the PQ3350 analyzer. Probes are 61 cm (24 in) for wrapping around bus bars.
The Extech PQ34-12 is a set of 1200 Amp Current Clamp Probes. For use with the PQ3450 and PQ3470 analyzers. Featuring a 50 mm (2 in) jaw size, this product comes with three current clamp probes and a year warranty.
The Extech PQ34-2 is a set of 200 Amp Current Clamp Probes. Use with the PQ3450 and PQ3470 analyzers. Featuring a 19 mm (0.8 in) jaw size, this product comes with three current clamp probes and a year warranty.
The Extech PQ34-30 is a set of 3000 A Flexible Current Probes for PQ3450/PQ3470 power quality analyzers. It has a 61 cm (24 in) length for wrapping around bus bars and wire bundles. Switch between 3 ranges: 3000 A, 300 A, and 30 A.
Constant Voltage/Current digital DC power supply with dual LCD
The Extech 382202 is a DC Power Supply which provides an adjustable 0 V to 30 V and 0 A to 1 A output. It features a dual backlit LCD display for current and voltage as well as short circuit and overload protection. Operates from 120 VAC ± 10%/60 Hz power source. Banana plug outputs. Complete with power cord.
Ideal for a wide range of applications including bench testing, field service, hobby, and telecommunication equipment, the solid state, compact Extech 382213 Digital Triple Output DC Power Supply delivers clean, reliable power while protecting itself and any device under test (DUT) from damage. It offers three choices of power output: adjustable 0 to 30 Volt, 0 to 3 Amp, plus fixed 5 and 12 Volt. Featuring a digital LCD display, the 382213 also includes overload and short circuit protection, constant voltage/current, easy snap terminals for 5 and 12 Volt outputs, and a current-limited front panel LED indicator. It complete with a power cord.
The two 30V outputs can be combined in parallel for 10A or in series for 60V. Comes complete with 4 pairs of test leads (banana plug to alligator clip) and an AC cord.
The Extech 382275 power supply is an easy-to-configure, highly stable, lab grade DC power supply with maximum output power of 600 Watts. The new DC power supply offers two degrees of control over both current and voltage outputs (course and fine). Output is adjustable from 0 to 30 Volts DC and 0 to 20 Amps with (0.1 Volts/Amps resolution). Dual green LED displays offer easy-to-read, high contrast readouts of voltage and current values. The 382275 offers four operating modes: normal mode, with values controlled by front-panel knobs; preset mode, which offers three popular voltage presets at 20 Amps: 5.0 Volts, 13.8 Volts, and 25 Volts; set mode, with three user-customizable presets; and remote control mode, where the user can remotely adjust output power on/off, voltage and current. Other features include automatic constant current and voltage, high RFI immunity, excellent EMI, a thermostat-controlled variable speed fan, as well as over-voltage, over-temperature, and short circuit protection. The 382275 offers a compact, low profile design and small footprint without compromising output noise and transient response factors. Complete with power cord.
Power supply features dual LED displays, high RFI immunity, excellent EMI, and a Thermostatic Control Fan. Additional features include over-voltage, over-temperature, and short circuit protection. Operates at 220V, 50/60Hz and comes complete with AC power cord.
Extech’s DCP36 power supply has 80W constant power topology and has autoranging Voltage and Current output. This compact and lightweight unit provides easy portability, and is ideal for tight workbenches with limited space. It features 4-Digit LED displays, 3-programmable presets, front/rear output terminals, and remote sensing for accurate applied voltage at load point.
The Extech 40180 is a Tone Generator and Amplifier Probe Kit. This heavy-duty kit with audible tone easily identifies wires or cables. The insulated inductive probe tip prevents shorting conductors. Featuring a wire trace, continuity test, clear/busy/ringing line test, and tip or ring identification. Includes alligator clips, RJ45 and RJ11 modular connectors, 9 V battery, and a case.
The CT20 is an electronic tool for electricians, alarm, cable installers and others who routinely need to check circuits for continuity and also identify cables and wires. It allows a single user to quickly identify and label two wires even when the wire ends are located in different rooms. It can accommodate test wire lengths up to 10,000-feet (3,000 meters), 26-gauge minimum. The CT20’s Remote Continuity mode allows the user to check continuity and to identify two or more cables/wires simultaneously.
The Extech DV25 is a Dual-Range NCV Detector that combines two models into one. The low range measures down to 24 Volt and the high range measures up to 1000 Volt. Includes audible and visual indication, rugged double molded housing, and a bright built-in LED flashlight. Complete with 2 x AAA batteries.
The Extech DV30 is a Non-Contact AC Voltage Detector with an adjustable sensitivity to pinpoint voltage source. AC Voltage detection from 12 Volt to 600 VAC; CAT III-600 Volt safety rating. Complete with four LR44 button batteries and a pocket clip.
The Extech DV690 is a rugged and reliable voltage detector that can quickly and safely detect up to 69 kV in high-voltage (HV) electrical systems. This non-contact, industrial-grade tool provides an extra layer of protection for anyone who works around HV electrical systems including electric power utility, storm restoration, telecommunications, and public safety professionals. Audible and visual alarms notify users of dangerous voltage presence, helping them maintain a safe distance in hazardous locations. Plus, five flexible mounting options make it easy to operate the device to get the job done efficiently.
The Extech VT30 is a voltage, continuity and phase tester, featuring a built-in flashlight and backlit digital display with bar graph. This rugged tester is protected by a double molded IP64 housing and offers polarity detection with LEDs for positive and negative DC as well as a CAT III 600 Volt / CATIV 600 Volt safety rating. The VT30 comes complete with a one year warranty, 2 AAA batteries, protective cap, and pouch case.
The FLIR CM78-PV is designed for both commercial and industrial electrical inspections. It supports solar photovoltaic (PV) DC measurements up to 1,500 V using test leads, and handles up to 1,000 A DC or AC via the clamp jaw for DC Power measurements. The device is equipped with features such as Inrush AC current, variable frequency drive (VFD) mode, True RMS, and Low Impedance (LoZ) mode to meet advanced electrical testing and measurement needs. The built-in non-contact infrared thermometer aids in troubleshooting panels, conduits, and motors allowing for issue diagnosis and confirmation through contact measurements or by capturing intermittent faults with its datalogging function. Additionally, the Bluetooth FLIR METERLiNK technology enables wireless connection to the METERLiNK app on mobile devices, facilitating instant documentation, reporting, and sharing of results from the field.
2 modelsClick to compare & select →
The FLIR PV48 is a highly effective tool engineered to assess the maximum power and efficiency of solar panels. It quickly measures critical parameters such as maximum power, voltage, current, open-circuit voltage (VOC), short-circuit current (ISC), and ambient temperature. With its I-V curve tracer, it offers intuitive and visual analysis of up to 800W per panel, ensuring peak solar panel performance. The device features a built-in lithium ion battery and a large high-contrast LCD screen that remains easily readable even in direct sunlight. The included MC4 PV plugs and clips simplify the process of diagnosing and troubleshooting solar panels, making it both straightforward and efficient.
The FLIR PV78 is designed for solar site surveys, panel installation, and maintenance of photovoltaic systems. It allows for instant measurements to determine solar (irradiance in watts per square meter) as required by IEC 62446-1 Electrical Safety of PV installations standard. You can measure temperature by placing the meter directly on the panel or by connecting an external probe for continuous measurements. The device also includes a compass to find the predominant direction and a tilt function to verify the inclination of a roof or panel. With FLIR METERLiNK Bluetooth technology, you can wirelessly connect to the METERLiNK app on mobile devices, enabling instantaneous documentation, reporting, and sharing of results from the field.
The FLIR EV45-NACS is equipped with a built-in NACS plug for NACS charging stations or AC wall connectors and is compatible with SAE J1772 Type 1 stations. It is designed for level 1 or level 2 electric vehicle AC charging stations (EVSEs) at both residential and commercial destinations. Test charge current interrupt device (CCID) to ensure electrical safety and verify EV Charger maximum current output charging voltages and frequency for further performance and safety checks with the included FLIR DM286 IGM multimeter for a comprehensive kit solution. The Bluetooth FLIR METERLiNKtechnology in the DM286 allows you to connect wirelessly to the METERLiNK app on mobile devices, enabling instantaneous documentation, reporting, and sharing of results.
The FLIR EV45-NACS is equipped with a built-in NACS plug for NACS charging stations or AC wall connectors and is compatible with SAE J1772 Type 1 stations, with a compact adapter included. It is designed for level 1 or level 2 electric vehicle AC charging stations (EVSEs) at both residential and commercial destinations. Maintain EV charging station safety by checking Protective Earth (PE) and electrical wiring, Test charge current interrupt device (CCID) to ensure electrical safety, Verify EV Charger maximum current output, Output charging voltages and frequency for further performance and safety checks, with the option to use the FLIR DM286 IGM multimeter for a comprehensive kit solution. The Bluetooth FLIR METERLiNK technology in the DM286 allows you to connect wirelessly to the METERLiNK app on mobile devices, enabling instantaneous documentation, reporting, and sharing of results.
Electrical Contractor Telecom Kit Is w/TS30 Test Set
15 modelsClick to compare & select →
12 modelsClick to compare & select →
The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.
The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.
The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.
5622 PRT from Fluke Calibration is designed for temperature measurements requiring fast response (0.4 seconds) or short immersion over a wide range.
The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.
The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.
The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.
TS25D Test Set w/346A Plug
TS25D Test Set w/Abn Cord
The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.
PRO3000 Tone Generator w/Alligator Clips and RJ11 Plug
TS30 Test Set w/Piercing Pin
TS30 Test Set w/Abn
Dbl Slt Strpr 22/24 Ga RH
Dbl Strpr w/Ctr 22/24 RH
Dbl Strpr w/Ctr 24/26 RH
Can Wrench w/Strpr 22 Ga
Can Wrench w/Strpr 24 Ga
TS52 Pro Test Set with 4 mm Banana & x-Lg Aligtr & Test Prb
CableIQ coax cable adapter kit for CIQ-100, includes F-connector, BNC and RCA connectors
Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads, VPS40 and TL75 Test Leads. Accepts wires up to 2.5 mm. The contact material is made of reinforced nickel plated steel
Set of four Hook Clips (two red and two gray).
Magnetic probe tips for voltage test leads with 4 mm banana connectors.
Dual Banana Plug 4 mm male to female BNC Adapter. The set consists of two adapters.
The set consists of two adapters. One red (signal) and one black (ground) 4-mm banana contact.
Each set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification.
50 OHM Coaxial BNC Cable Set, 3 x 0.5 M. Three Colored BNC Male Connectors (Red, Gray, and Black) for Easy Identification
Male BNC to dual female BNC T-piece. Set consists of two adapters. BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 Series shielded banana jack inputs.
Test Lead 4 mm Banana, x-Lg Alig, Test Prb for: TS54, 53, 23
TS54 Pro LCD Butt-in Test Set + TDR, 4 mm Ban, x-Lg Alig, Test Prb
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
9 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
All.clip, Ex-large IEC1010, Bulk Pack
Coupler, IEC1010 Set, Bulk Packaged
2 modelsClick to compare & select →
2 modelsClick to compare & select →
The Fluke 1630-2 FC Stakeless Earth Ground Clamp is a heavy-duty clamp jaw that allows you to test the grounding components of equipment in hard-to-reach spaces.
Replacement earth ground stake for Fluke 1623-2 and 1625-2 GEO Earth Ground Testers. Heavy-duty steel construction for reliable soil contact during 3- and 4-pole ground resistance testing.
Clip-on inducing current transformer for Fluke 1623-2 and 1625-2 GEO Earth Ground Testers. Applies a test signal through the ground conductor for selective earth ground resistance testing without disconnecting the grounding system.
Used as a Selective clamp for ground loop resistance measurement around power pylons.
5 modelsClick to compare & select →
3 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
9 modelsClick to compare & select →
4 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
10 modelsClick to compare & select →
7 modelsClick to compare & select →
Detect and record parameters including RMS average, transients, flicker, and harmonics with the Fluke VR1710, a single phase voltage recorder.
Cable market set with 3P+N+PE markers for use with Fluke power and energy loggers, or other three-phase products with cable diameters of 3-5mm.
2 modelsClick to compare & select →
11 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
FLUKE-17XX Iflexi Extension Cable 5 M
2 modelsClick to compare & select →
The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.
The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.
FLUKE-174X Power Quality Logger
5 modelsClick to compare & select →
11 modelsClick to compare & select →
7 modelsClick to compare & select →
Fluke TLPV1 MC4 to 4mm Test Lead Set ensures safe PV measurements with Staubli MC4 connectors, CAT III 1500V. Ideal for maintenance and troubleshooting.
393 FC solar clamp meter measures up to 1500 V dc, 1000 V ac, IP54 rated, CAT III. Ideal for PV installation, solar PV arrays, electric railways and data centers.
6 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
This all-in-one solar PV testing tool provides I-V curve tracing, PV system performance analysis and conforms to IEC 62446-1 standard.
2 modelsClick to compare & select →
7 modelsClick to compare & select →
The Fluke FLK-IRR1-SOL Solar Irradiance Kit comes with a meter, temperature probe and soft carrying case.
Fluke PV Module Lift ladder-mounted pulley system. Raises solar PV modules safely from ground level to rooftop without manual carry — one person operates the system from the ladder while modules travel vertically alongside the rungs. Reduces drops, panel damage, and installer fatigue on residential and light-commercial solar installs. This variant ships with a 80 ft rope — suited to taller residential or light-commercial roofs.
Fluke PV Module Lift ladder-mounted pulley system. Raises solar PV modules safely from ground level to rooftop without manual carry — one person operates the system from the ladder while modules travel vertically alongside the rungs. Reduces drops, panel damage, and installer fatigue on residential and light-commercial solar installs. This variant ships with a 60 ft rope — suited to typical residential roofs.
The TLPV-UTOOL enables quick disconnection of solar PV connectors, compatible with Fluke TLPV1 and TLPV2 leads. Ideal for efficient installations.
Connector, qty 2 Sets, Black TL with Red Blue Connectors
The Fluke U1500S 1,500V DC Voltage Sensor allows you to safely connect to DC bus bars at up to 1.5kV, connects to the instrument voltage input.The voltage can be scaled in the instrument to provide results in real units.
2 modelsClick to compare & select →
Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.
Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.
Tachometer for the Fluke 810 Vibration Tester — measures machine rotational speed (RPM), the running-speed reference the 810 uses when analyzing vibration.
The Fluke 820-2 LED stroboscope freezes motion of rotating or reciprocating machinery for visual inspection without stopping equipment. Ultra-bright LED with adjustable flash rate.
This pulley alignment tool laser heps you get fast, easy, and accurate pulley alignments to keep your plant up and running.
Click to compare & select →
Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.
Rack Mount Kit
USB to RS232 Cable Adapter
IEEE-488 Shielded Interface Cable, 1M
IEEE-488 Shielded Interface Cable, 2M
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
6 modelsClick to compare & select →
2 GHz DSX Multimode OLTS Inspc V2, w/Wi-fi
4 modelsClick to compare & select →
4 modelsClick to compare & select →
7 modelsClick to compare & select →
MS2-FTK copper & fiber basic technician's kit troubleshoots network cables, includes MicroScanner² and SimpliFiber Pro
Earth Spike Test Kit for Fluke 1653
Fluke Networks MT-8200-60 Kit is the first network cable toner and probe to offer digital and analog signaling all in one network toner and probe.
Fluke Connect Wireless test tools show real-time measurements from remote modules up to 20 meters away. Simultaneous readings on a single screen.
The Fluke CNX t3000 K-Type Wireless Voltage Module lets you troubleshoot HVAC systems faster, safer, easier. Record and view readings remotely.
A fully functional AC voltage meter that wirelessly relays AC voltage measurements to other Fluke Connect enabled master units
A fully functional DC voltage meter that wirelessly relays DC voltage measurements to other Fluke Connect enabled master units
2 modelsClick to compare & select →
Urd Transformer Grounding Set - 15kv
CableIQ remote identifier kit for CIQ-100, includes remote identifier numbers 2-4
CableIQ remote identifier kit, for CIQ-100, includes remote identifier numbers 5-7
4 modelsClick to compare & select →
Fluke Networks MicroScanner MS-POE remote identifier kit includes remote identifier numbers 2-7
The Fluke SB-500 Shaft Voltage Brush Set includes three carbon fiber replacement brushes for use with the SVS-500 Shaft Voltage Measurement Kit probe holders
3 modelsClick to compare & select →
4 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
Want to quickly verify fiber activity, polarity, and connectivity without spending thousands? Now you can for less than $200. Check out the FiberLert.
Optifiber Pro Multimode OTDR V2, w/Inspection & Wi-Fi
Optifiber Pro Quad OTDR V2, w/Inspection & Wi-Fi
Optifiber Pro Singlemode OTDR V2, w/Inspection & Wi-Fi
2 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Click to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.
Inspect MPO and single fiber optic cables easily with the Fluke Networks FI2-7300 FiberInspector Pro including Versiv. Instant, real-time image to view the full connector down to individual end faces.
Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.
3 modelsClick to compare & select →
15 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
13 modelsClick to compare & select →
Magnetic-strap holster compatible with the Fluke Networks MicroScanner 2 (MS2-KIT), FI-500 FiberInspector Micro, SimpliFiber Pro (SFP), and MultiFiber Pro (MFP).
4 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
4 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
Heavy duty case with accessory storage compartments.
Double insulated voltage probe for ScopeMeter 190 series.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Quickly detects and locates gas leaks with advanced sound visualization, an intuitive interface, and a ready-to-use design.
Upgrade leak detection for non-pressurized vessels with the Fluke SB140 SoundBeacon ultrasonic transmitter. Compatible with Fluke ii905 and ii915 Acoustic Imagers.
3 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
Carrying case for the Fluke Networks IntelliTone toner and probe.
2 modelsClick to compare & select →
8 modelsClick to compare & select →
14 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
6 modelsClick to compare & select →
Buy Fluke Networks Genuine CableIQ RJ-45/11 Modular Adapter
Buy Fluke Networks Genuine CableIQ Speaker Wire Adapter
2 modelsClick to compare & select →
Carrying pouch with Fluke Networks logo for the TS100 and TS100 Pro Cable Fault Finders.
15 modelsClick to compare & select →
5 modelsClick to compare & select →
11 modelsClick to compare & select →
4 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
5 modelsClick to compare & select →
Urd Transformer Grounding Set - 15kv
Urd Transformer Grounding Set - 15kv
Click to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Grounded Parking Stand Assemblies - 15kv
Grounded Parking Stand Assemblies - 15kv
30° C-Head Ground Clamps
Truck Grounding Reel (Spring Retractable)
Distribution / Sub Transmission Grounding Set
Distribution / Sub Transmission Grounding Set
Distribution / Sub Transmission Grounding Set
Distribution / Sub Transmission Grounding Set
Urd Transformer Grounding Set - 15kv
Urd Transformer Grounding Set - 15kv
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
4 modelsClick to compare & select →
Click to compare & select →
Click to compare & select →
3 modelsClick to compare & select →
Ground Cluster Bars and Supports
Click to compare & select →
Click to compare & select →
Ground Cluster Bars and Supports
Ground Cluster Bars and Supports
Urd Transformer Grounding Set - 15kv
Grounding Cable Ferrules
Grounding Cable Ferrules
11 modelsClick to compare & select →
16 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
5 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
Handheld ultrasonic detector for locating compressed-air leaks, electrical corona, and partial discharge in switchgear and HV equipment. Includes parabolic dish, contact probe, and noise-isolating headphones.
Phasing meter for verifying phase agreement between two energized cables before paralleling. Direct-reading analog instrument used in utility cable jointing and switchgear commissioning.
High-voltage phasing tester for verifying phase agreement between two energized circuits before paralleling. 4-35 kV operating range, LED indication, integrated insulating pole.
Handheld laser distance meter for distance, area, and volume measurements during electrical and facility inspection work.
2 modelsClick to compare & select →
AVO840 CAT III/CAT IV Bt TRMS Multimeter
Professional True-RMS digital multimeter with TFT color LCD, 50,000-count display, bar graph, capture function, and Bluetooth connectivity. Rechargeable batteries. CAT IV 600 V / CAT III 1000 V rated per IEC 61010-1. Pairs with the Megger Link app for live trend graphing and remote logging.
Megger DPM1000 handheld AC/DC True-RMS clamp meter — measures up to 1000 A current and 1000 V voltage, with single- and three-phase active power and power factor measurements (Watts to 1 MW), harmonics to the 25th order, total harmonic distortion, capacitance, frequency, resistance to 100 kΩ, and temperature to 1000 °C via the supplied K-type thermocouple. CAT IV 600 V / CAT III 1000 V, 9999-record data logger, Bluetooth + Megger Link iOS/Android app, internal LED torch, non-contact voltage detection.
Bluetooth-enabled Rogowski-coil flexible clamp meter for AC current measurement up to 3000 A. Built-in True-RMS AC/DC voltage to 1000 V, plus resistance, continuity, frequency, and capacitance for quick verifications. 10,000-count display. CAT IV 600 V / CAT III 1000 V (8.1 kV transient withstand per IEC 61010). Pairs with the Megger Link app for trend graphing and remote logging — ideal for power transmission, generator and three-phase load balancing, welding, and pulsed-power applications.
High current line/earth loop impedance tester for single- and three-phase systems, 50–550 V supply. Auto-ranges at 16 Hz, 50/60 Hz, or 400 Hz; two ranges (20 Ω / 200 Ω) with 0.01 Ω resolution and up to 27 A test current at 550 V. CAT IV 300 V phase-to-earth, IP54 weatherproof, rubber-armoured case. The -EN-00 variant ships with a two-wire red/green lead set.
4 modelsClick to compare & select →
2 modelsClick to compare & select →
Multifunctional handheld voltage and current tester for electricians: 1000 V AC/DC measurement, True-RMS AC, 200 A AC current via built-in clamp jaw, continuity, phase rotation, single-pole voltage, and inrush current — all on one CAT IV 600 V / CAT III 1000 V instrument with IP65 housing. Detachable test leads, LED + LCD display with self-test, and voltage measurement that works even with depleted batteries. Conforms to IEC/EN 61243-3:2014.
4 modelsClick to compare & select →
Soft carry pouch for the Megger AVO handheld multimeter series. Fits the AVO215, AVO410/AVO415, AVO830/AVO840, and AVO850 instruments. Padded interior with belt loop.
S1-1568/2-US Expert 15 kV Insulation Resistance Tester with full diagnostic tests and PI Predictor (PIP). High charge (6 mA) and ultra-high-noise (8 mA) modes with average and adaptive filters. On-board memory with USB and Bluetooth, plus full remote control. CertSuite Asset support.
3 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
S1-1068/2-US Expert 10 kV Insulation Resistance Tester 2024 Pip
S1-568/2-US Expert 5 kV Insulation Resistance Tester 2024 Pip
Portable cable fault location system for low-voltage shielded and unshielded power cables. Combines TDR pre-location, 500 J / 4 kV surge pinpointing, DC breakdown testing, insulation resistance measurement and sheath fault testing in one battery- or mains-powered unit. Easy Go guided workflow; compact enough to fit in a car trunk for rapid response.
3 modelsClick to compare & select →
2 modelsClick to compare & select →
7 modelsClick to compare & select →
3 modelsClick to compare & select →
DLRO-10HDXWITHOUT Lead Set-P3
DLRO10HD and DLRO10HDX CAT III rated industrial application lead kit with terminal cover. The terminal cover enables the CAT III 300 V safety rating on the DLRO10HDX.
3 modelsClick to compare & select →
17 modelsClick to compare & select →
4 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
8 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
13 modelsClick to compare & select →
12 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
Line-operated two-channel transformer winding resistance ohmmeter for safe and accurate field measurement of resistance in smaller transmission and distribution transformers. 6 A maximum current, 48 V test voltage for fast core saturation, ±0.25% accuracy. Single-button test cycle, automatic passive discharge to de-energize the winding after each test. IP67-rated rugged plastic case. Instrument only — leads sold separately or as part of the BN-19090 kit.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
3 modelsClick to compare & select →
5 modelsClick to compare & select →
11 modelsClick to compare & select →
45 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
Case - Replacement Carrying Case for Clamp-on Meter Models 407 & 607
Heavy duty case with accessory storage compartments.
Zippered Case with Detachable Pouch | Fluke C125
2 modelsClick to compare & select →
77 modelsClick to compare & select →
MiniFlex 3000A, 14", 1mV/A High Frequency (for any BNC Oscilloscope)
10 modelsClick to compare & select →
9 modelsClick to compare & select →
36 modelsClick to compare & select →
The Fluke 3000 FC Wireless Test Tools are a team and the modules are team players. You connect any of the Fluke Connect Modules to your test point and then view the results through Windows software on your PC - up to 20 meters (65.6 feet) away.
USB-TO-SERIAL-RS-232 Interface Adapter Cable
23 modelsClick to compare & select →
Lead - Utility Test Lead Kit #1 Rated 1000V CAT IV
4 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Learn more about the Fluke AS400, a new factory probe accessory extension set for use with Fluke VPS400 Series Probes.
10 replacement probe tips for Fluke 500 Series Battery Analyzers. For use with the BTL10, BTL20 and BTL21 test probes.
10 replacement probe tips for Fluke 500 Series Battery Analyzers. For use with the BTL10, BTL20 and BTL21 test probes.
4 modelsClick to compare & select →
Click to compare & select →
SureGrip fused test probes offer additional measurement protection and have built-in replaceable fuses.
2 modelsClick to compare & select →
Clip set includes RJ-45-to-8-clip test lead for CableIQ or MicroScanner
Set of two (one red, one gray) double insulated silicone shielded test leads for noise free measurements. Specially designed for use with the Fluke ScopeMeter 120 Series.
Power cord 220V (for use with Micro-ohmmeters, Megohmmeters, Ground Testers)
AC power adapter for the Fluke 810 Vibration Tester. Ships with international plug set.
Universal SMPS Level VI power adapter and battery charger for the Fluke ScopeMeter 190 Series.
Universal SMPS Level VI power adapter and battery charger for the Fluke 430 Series Power Quality Analyzers and 120B ScopeMeter.
NiMH battery pack for the Fluke 120 Series ScopeMeter and 43 / 43B Power Quality Analyzers.
NiMH battery pack for the Fluke ScopeMeter 190 / 190C and 430 Series Power Quality Analyzers.
2400 mAh Li-ion battery for the Fluke 190-Series II ScopeMeter.
4800 mAh high-capacity Li-ion battery for the Fluke 190-Series II/III ScopeMeter, MDA-500 Series III, and 430-II Series Power Quality Analyzers.
External charger for the Fluke BP290 and BP291 Li-ion battery packs.
Universal single-bay charger for the Fluke ii900-Series Industrial Acoustic Imagers (ii900 / ii905 / ii910 / ii915).
Wall outlet adapter for the Fluke 174x Power Quality Analyzer Series.
Universal L6 power adapter and battery charger for Fluke ScopeMeter 90 and 120 Series and the Fluke 43 / 43B Power Quality Analyzers.
30 W, 15 V 2 A power supply with US, EU, AU, and UK adapters. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
30 W, 15 V 2 A power supply with US adapter. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
30 W, 15 V 2 A power supply with US, South Africa, and India adapters. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
South Africa and India plug adapter for the 30 W power supply (PWR-SPLY-30W).
10.8 V 6.8 Ah battery pack for the Fluke ii905 and ii915 Industrial Acoustic Imagers.
Smart battery pack for the Fluke 810 Vibration Tester. ~8 hours of runtime under normal conditions.
The Extech 380465 is a Kelvin Clip Test Lead Set for Milliohm Meter Models 380460 and 380462. The 380465 is built from compact, durable field service housing with a protective cover.
The 380565 is a set of Test Leads with Kelvin Clips for the Extech 380580 battery powered milliohm meter. Use these test leads and kelvin clips as extras or spare.
The Extech 382254 is a replacement set of test leads for the 382252 Earth Ground Resistance Tester Kit. The test leads are color-coded and durable.
At-a-glance power quality health for faster troubleshooting. Capture high-speed transients up to 8 kV. Easily view V/A/Hz, power, dips, swells, and harmonics data.
This 9190 wheeled case guards your Fluke Calibration 9190A Ultra-Cool Metrology Well—foam-lined, dent-resistant resin protects during transport.
51 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
3 modelsClick to compare & select →
At-a-glance power quality health for faster troubleshooting. Capture high-speed transients up to 8 kV. Easily view V/A/Hz, power, dips, swells, and harmonics data.
The Fluke 287 electronics multimeter allows you to log and zoom in on problems. Now compatible with the Fluke Connect mobile app.
Solve complex problems in electronics, plant automation, power distribution & electro-mechanical equipment with Fluke 289 True-RMS data logging multimeter.
Click to compare & select →
Click to compare & select →
Click to compare & select →
Click to compare & select →
Click to compare & select →
2 M Breakout Cord for Sm Mpoapc Unpinned Lcapc Connector
Fiber optic test reference cord for Tier 1 optical loss testing with Fluke Networks MultiFiber Pro or CertiFiber Pro test sets.
Click to compare & select →
Click to compare & select →
Type A Polarity MPO Adapter for Sm APC
Insulated Jumper Cable - 15kv, 25kv, 35kv
2 modelsClick to compare & select →
2 modelsClick to compare & select →
15kv Factory Assembled Jumpers
15kv Factory Assembled Jumpers
15kv Factory Assembled Jumpers
15kv Factory Assembled Jumpers
15kv Factory Assembled Jumpers
15kv Factory Assembled Jumpers
15kv Factory Assembled Jumpers
Insulated Jumper Cable - 15kv, 25kv, 35kv
25kv Factory Assembled Jumpers
25kv Factory Assembled Jumpers
15kv Factory Assembled, Insulated Jumpers, with
25kv Factory Assembled Jumpers
25kv Factory Assembled Jumpers
25kv Factory Assembled Jumpers
3 modelsClick to compare & select →
Insulated Jumper Holders
Mechanical Jumper Clamps
Insulated Jumper Holders
Insulated Jumper Holders
Insulated Jumper Holders
4 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
11 modelsClick to compare & select →
9 modelsClick to compare & select →
14 modelsClick to compare & select →
14 modelsClick to compare & select →
Click to compare & select →
12 modelsClick to compare & select →
11 modelsClick to compare & select →
9 modelsClick to compare & select →
Click to compare & select →
Banana Plug Patch Cord - (Violet) Made to Order, Bulk
Banana Plug Patch Cord (Black) Made to Order, Bulk
Banana Plug Patch Cord (Blue) Made to Order, Bulk
Banana Plug Patch Cord (Blue), Made to Order, Bulk
Banana Plug Patch Cord (Blue), Made to Order, Bulk
Banana Plug Patch Cord (Blue), Made to Order, Bulk
Banana Plug Patch Cord (Gray) Made to Order, Bulk
Banana Plug Patch Cord (Green) Made to Order, Bulk
Banana Plug Patch Cord (Green) Made to Order, Bulk
Banana Plug Patch Cord (Orange), Made to Order, Bulk
Banana Plug Patch Cord (Orange), Made to Order, Bulk
Banana Plug Patch Cord (red, Made to Order, Bulk
Banana Plug Patch Cord (Red) Bulk
Banana Plug Patch Cord (Violet) Made to Order, Bulk
Banana Plug Patch Cord (White) Made to Order, Bulk
Banana Plug Patch Cord (White), Made to Order, Bulk
Mini Banana Plug Patch Cord (Black), Made to Order, Bulk
Mini Banana Plug Patch Cord (Green) Made to Order, Bulk
Mini Banana Plug Patch Cord (Orange) Made to Order, Bulk
Mini Banana Plug Patch Cord (White) Made to Order, Bulk
Mini Clip Patch Cord (Black), Made to Order, Bulk
Mini Clip Patch Cord (Red), Made to Order, Bulk
Pin Tip Plug Patch Cord (Black), Made to Order, Bulk
Pin Tip Plug Patch Cord (Green) Made to Order, Bulk
Pin Tip Plug Patch Cord (Red), Made to Order, Bulk
Pin Tip Plug Patch Cord (White) Made to Order, Bulk
Pin Tip Plug Patch Cord, (Black) Made to Order, Bulk
Pin Tip Plug Patch Cord, (Blue), Made to Order, Bulk
Pin Tip Plug Patch Cord, (Red) Made to Order, Bulk
Click to compare & select →
Click to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Click to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
10 modelsClick to compare & select →
11 modelsClick to compare & select →
11 modelsClick to compare & select →
10 modelsClick to compare & select →
10 modelsClick to compare & select →
2 modelsClick to compare & select →
5 modelsClick to compare & select →
6 modelsClick to compare & select →
7 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
Click to compare & select →
10 modelsClick to compare & select →
5 modelsClick to compare & select →
5 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
Alligator Clip Patch Cord (Green), Made to Order, Bulk
Alligator Clip Patch Cord (White), Made to Order, Bulk
Alligator Clip, Banana Plug (Blue), Made to Order, Bulk
Alligator Clip, Banana Plug (Brown) Made to Order, Bulk
Alligator Clip, Banana Plug (Green), Made to Order, Bulk
BNC (F) to Alligator Clips 12 Inches Made to Order, Bulk
BNC (F) to Minigrabber Test Clips Bulk
BNC (M) /Grabber, RG58C/U, Made to Order, Bulk
Grabber/BNC (M), RG174/U, Made to Order, Bulk
Medium Alligator Clip Set, Bulk Pack
Mini Grabber with Multi-Stack - Banana Plug (Red), Made to Order, Bulk
Mini-Grabber with Right Angle, IEC 1010 (Black), Made to Order, Bulk
Mini-Grabber with Right Angle, IEC 1010 (Red), Made to Order, Bulk
Minigrabber (Black) Bulk
Minigrabber (Blue), Made to Order, Bulk
Minigrabber Patch Cord (Orange), Made to Order, Bulk
Minigrabber Patch Cord (Red), Made to Order, Bulk
Minigrabber/Banana Plug (Orange), Made to Order, Bulk
Minigrabber/Banana Plug (Red) Made to Order, Bulk
Minigrabber/Banana Plug (Violet), Made to Order, Bulk
Minigrabber/Banana Plug (White), Made to Order, Bulk
Minigrabber/Banana Plug (White), Made to Order, Bulk
Minigrabber/Banana Plug Made to Order (Black) Bulk
128 modelsClick to compare & select →
5 modelsClick to compare & select →
11 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
11 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
11 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
7 modelsClick to compare & select →
2 modelsClick to compare & select →
Click to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
5 modelsClick to compare & select →
4 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
6 modelsClick to compare & select →
8 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
7 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
6 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
Banana Jack, 20 AWG (Black) Bulk
Banana Jack, Panel Tin, (Yellow) Made to Order, Bulk
Banana Jack, Tin Plated (Orange) Bulk
Banana Plug Gold Plated (White) Made to Order, Bulk
Banana Plug/Pin Tip Plug (Black) Made to Order, Bulk
Banana Plug/Pin Tip Plug (Black) Made to Order, Bulk
Banana Plug/Pin Tip Plug (Black), Made to Order, Bulk
Banana Plug/Pin Tip Plug (Black), Made to Order, Bulk
Banana Plug/Pin Tip Plug (Black), Made to Order, Bulk
Banana Plug/Pin Tip Plug (Red) Made to Order, Bulk
Banana Plug/Pin Tip Plug (Red) Made to Order, Bulk
Banana Plug/Pin Tip Plug (Red), Made to Order, Bulk
Banana Plug/Pin Tip Plug (Red), Made to Order, Bulk
Banana Plug/Pin Tip Plug (Red), Made to Order, Bulk
Banana Plug/Pin Tip Plug (White), Made to Order, Bulk
Double Banana Plug, 2 Conductor Made to Order, Bulk
Double Banana Plug, 2 Conductor Made to Order, Bulk
Double Banana Plug, 2 Conductor Made to Order, Bulk
Double Banana Plug, 2 Conductor Made to Order, Bulk
Double Banana Plug, 2 Conductor Made to Order, Bulk
Double Banana, Shielded Line, Made to Order, Bulk
Double Banana/Mini Clip, RG58C/U Made to Order, Bulk
Double Binding Post Mounting Base Bulk (Red)
Double Binding Post/Banana Plug Bulk
Double Mini Banana Jack Mounting Base, (Red), Made to Order, Bulk
Microvolt/Banana Plug Cord (Black), Made to Order, Bulk
Microvolt/Banana Plug Cord (Red), Made to Order, Bulk
Mini Banana Plug (Black) Bulk
Mini Binding Post, Tin Plated (Green) Bulk
Mini Binding Post, Tin Plated Bulk (Black)
Terminal Strip Banana Jack (Green), Made to Order, Bulk
Terminal Strip Banana Jack 8-32 (Blue), Made to Order, Bulk
20 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
7 modelsClick to compare & select →
2 modelsClick to compare & select →
5 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
Ins Spade Lug W/ban Jack Set Bulk Pack
Plug/Rivet.093 Panel Bulk
Terminal Jack, Male 10-32 (Blue), Made to Order, Bulk
Terminal Jack, Male 10-32 (Yellow), Made to Order, Bulk
2 modelsClick to compare & select →
5 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
3 Lug Triax, Belden 9222 Made to Order, Bulk
3 Lug Triax, Belden 9222 Made to Order, Bulk
3 Lug Triax, Belden 9222 Made to Order, Bulk
Lug Triax, Belden 9222 Made to Order, Bulk
MMCX Jack Right Angle PCB Receptacle, Bulk
Stress Boot, RG174 (Gray), Made to Order, Bulk
Stress Boot, RG174 (White), Made to Order, Bulk
Stress Boot, RG174 (Yellow) Made to Order, Bulk
Stress Boot, RG174/U (Blue) Bulk, Made to Order
Stress Boot, RG174/U (Green) Bulk, Made to Order
Stress Boot, RG174/U (Red) Bulk, Made to Order
Stress Boot, RG58 (White), Made to Order, Bulk
Triax (F), Hermetic, Bulk
Triaxial (M), Belden 9222, Made to Order, Bulk
Type N (m-f) Bulk
15 modelsClick to compare & select →
Click to compare & select →
Click to compare & select →
Click to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
5 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
5 modelsClick to compare & select →
8 modelsClick to compare & select →
2 modelsClick to compare & select →
4 modelsClick to compare & select →
2 modelsClick to compare & select →
10 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
6 modelsClick to compare & select →
Adapter, BNC (F), Pwb Pins Bulk
BNC (F), PC Mounting, Right Angle Bulk
BNC (f/m/f) Adapter, In-line, 75 Ohm Bulk Pkg
BNC (M) Cable Without Boot
BNC (M) Cable Without Boot Made to Order, Bulk
BNC (M) RG59B/U Made to Order, Bulk
BNC (M) with 20 AWG Leads Made to Order, Bulk
BNC (M) with 20 AWG Leads, Made to Order, Bulk
BNC (M), 20AWG Leads - Made to Order, Bulk
BNC (M), 20AWG Leads, Made to Order, Bulk
BNC (M), Low Noise Made to Order, Bulk
BNC (M), Low Noise, Made to Order, Bulk
BNC (M), RG174/U Made to Order, Bulk
BNC (M), RG223/U Made to Order, Bulk
BNC (M), RG58C/U Made to Order, Bulk
BNC (M), RG58C/U Made to Order, Bulk
2 modelsClick to compare & select →
3 modelsClick to compare & select →
Test Probe Set, Bulk
2 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
DMM Test Lead with Retractable Sheath Set, Made to Order, Bulk
4 modelsClick to compare & select →
Shielded Box Bulk
Shielded Box Bulk
Shielded Box Bulk
Shielded Box, Bulk
Hex Nut 1/4-32, Made to Order, Bulk
0.1 to 100 Arms AC. 2% +/- 2LSDs. Inside diameter of 0.8" (20mm). Outside dimensions of 5.25 x 2.06 x 1.35".
1 to 1000 amps AC. 0.5%+/-2LSD's. Inside diameter 2.17 inch (55mm). Outside dimensions 8.1 x 4.1 x 1.54 inch.
0.02 to 5 Arms AC. 2% +/- 2LSDs. Inside diameter of 0.8" (20mm). Outside dimensions of 5.25 x 2.06 x 1.35".
Clamp-on Probe, 10-2000ADC, 10-1500AAC, 3%, bus bar: 4.75"x2.1", cable: 3.3" dia.
5 to 400 amps AC/DC, 400 to 600 amps DC. 2%+/-2LSD's to 400 amps. 3%+/-2LSD's to 600 amps. Inside diameter one 1.18" cable or two 0.95" cables. Outside dimentions 7.68 x 2.6 x 1.34 inch.
5ma to 1 amps AC 1% +/- 2ma and 1 to 200 amps AC 1% +/-0.2A, 4.5" inside opening.
2 modelsClick to compare & select →
Set of 4 color-coded barrel-fused safety leads, 7 feet long, with jumbo alligator jaws to grab bolts up to 3/4 inch in diameter.
Set of 4 color coded safety leads, 7 feet long, with jumbo alligator jaws to grab bolts up to 3/4" in diameter.
Hot sticks for use with the 15KVP. One set of sticks required for each 15KVP.
Set of 4 jumbo alligator clips, open to 1.26", 600V CAT IV.
2 modelsClick to compare & select →
2 modelsClick to compare & select →
