Data loggers, chart recorders, and monitoring systems
282 product families(925 total products)
10 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →

Panel data logger with up to 8 current/voltage or RTD/TC inputs, digital trigger input, two relay outputs, USB host port for flash storage, RS485 Modbus RTU, and wide-range 19-50 VDC / 85-260 VAC supply. Free configuration and recording software.

Temperature Data Logger w/Dig Display and USB

Temperature/RH Data Logger w/Dig Display and USB

2 modelsClick to compare & select →
2 modelsClick to compare & select →

The FLIR GW66 Remote Monitoring Gateway is part of the FLIR SV88 and SV89 Vibration Monitoring Solution Kits. It receives vibration and temperature data from SV88 and SV89 sensors and sends data to the built-in webserver and CBM. The GW66 gateway also stores the data to its internal memory in case of Wi-Fi outage. For more information on the FLIR SV88 or SV89 Vibration Monitoring Solution Kits, please visit flir.com/SV88-KIT or flir.com/SV89-KIT.


Electrical Contractor Telecom Kit Is w/TS30 Test Set



The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.

The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.







The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.





5622 PRT from Fluke Calibration is designed for temperature measurements requiring fast response (0.4 seconds) or short immersion over a wide range.




The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.

The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.























The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.















TS25D Test Set w/346A Plug

TS25D Test Set w/Abn Cord

The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.


PRO3000 Tone Generator w/Alligator Clips and RJ11 Plug




TS30 Test Set w/Piercing Pin

TS30 Test Set w/Abn


Dbl Slt Strpr 22/24 Ga RH

Dbl Strpr w/Ctr 22/24 RH

Dbl Strpr w/Ctr 24/26 RH




Can Wrench w/Strpr 22 Ga

Can Wrench w/Strpr 24 Ga





TS52 Pro Test Set with 4 mm Banana & x-Lg Aligtr & Test Prb

CableIQ coax cable adapter kit for CIQ-100, includes F-connector, BNC and RCA connectors

Test Lead 4 mm Banana, x-Lg Alig, Test Prb for: TS54, 53, 23

TS54 Pro LCD Butt-in Test Set + TDR, 4 mm Ban, x-Lg Alig, Test Prb
2 modelsClick to compare & select →

Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.

Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.

Tachometer for the Fluke 810 Vibration Tester — measures machine rotational speed (RPM), the running-speed reference the 810 uses when analyzing vibration.

The Fluke 820-2 LED stroboscope freezes motion of rotating or reciprocating machinery for visual inspection without stopping equipment. Ultra-bright LED with adjustable flash rate.

This pulley alignment tool laser heps you get fast, easy, and accurate pulley alignments to keep your plant up and running.
Click to compare & select →


Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.




MS2-FTK copper & fiber basic technician's kit troubleshoots network cables, includes MicroScanner² and SimpliFiber Pro

Fluke Networks MT-8200-60 Kit is the first network cable toner and probe to offer digital and analog signaling all in one network toner and probe.

CableIQ remote identifier kit for CIQ-100, includes remote identifier numbers 2-4

CableIQ remote identifier kit, for CIQ-100, includes remote identifier numbers 5-7

Fluke Networks MicroScanner MS-POE remote identifier kit includes remote identifier numbers 2-7
3 modelsClick to compare & select →
4 modelsClick to compare & select →


3 modelsClick to compare & select →
4 modelsClick to compare & select →
4 modelsClick to compare & select →
6 modelsClick to compare & select →

2 GHz DSX Multimode OLTS Inspc V2, w/Wi-fi
4 modelsClick to compare & select →
4 modelsClick to compare & select →
7 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →

Want to quickly verify fiber activity, polarity, and connectivity without spending thousands? Now you can for less than $200. Check out the FiberLert.


Optifiber Pro Multimode OTDR V2, w/Inspection & Wi-Fi

Optifiber Pro Quad OTDR V2, w/Inspection & Wi-Fi

Optifiber Pro Singlemode OTDR V2, w/Inspection & Wi-Fi


2 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
Click to compare & select →

3 modelsClick to compare & select →
3 modelsClick to compare & select →


The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.

Inspect MPO and single fiber optic cables easily with the Fluke Networks FI2-7300 FiberInspector Pro including Versiv. Instant, real-time image to view the full connector down to individual end faces.

Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.
3 modelsClick to compare & select →
15 modelsClick to compare & select →
6 modelsClick to compare & select →
2 modelsClick to compare & select →
13 modelsClick to compare & select →

Magnetic-strap holster compatible with the Fluke Networks MicroScanner 2 (MS2-KIT), FI-500 FiberInspector Micro, SimpliFiber Pro (SFP), and MultiFiber Pro (MFP).
3 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →

Carrying case for the Fluke Networks IntelliTone toner and probe.
2 modelsClick to compare & select →
8 modelsClick to compare & select →
14 modelsClick to compare & select →
3 modelsClick to compare & select →
3 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
2 modelsClick to compare & select →
6 modelsClick to compare & select →

Buy Fluke Networks Genuine CableIQ RJ-45/11 Modular Adapter

Buy Fluke Networks Genuine CableIQ Speaker Wire Adapter
2 modelsClick to compare & select →

Carrying pouch with Fluke Networks logo for the TS100 and TS100 Pro Cable Fault Finders.
15 modelsClick to compare & select →

AC power adapter for the Fluke 810 Vibration Tester. Ships with international plug set.
30 W, 15 V 2 A power supply with US, EU, AU, and UK adapters. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
30 W, 15 V 2 A power supply with US adapter. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
30 W, 15 V 2 A power supply with US, South Africa, and India adapters. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
South Africa and India plug adapter for the 30 W power supply (PWR-SPLY-30W).

Smart battery pack for the Fluke 810 Vibration Tester. ~8 hours of runtime under normal conditions.
51 modelsClick to compare & select →
3 modelsClick to compare & select →
Click to compare & select →
2 modelsClick to compare & select →

Clip set includes RJ-45-to-8-clip test lead for CableIQ or MicroScanner
Click to compare & select →
Click to compare & select →
Click to compare & select →
Click to compare & select →
Click to compare & select →
2 M Breakout Cord for Sm Mpoapc Unpinned Lcapc Connector
Fiber optic test reference cord for Tier 1 optical loss testing with Fluke Networks MultiFiber Pro or CertiFiber Pro test sets.
Click to compare & select →
Click to compare & select →
Type A Polarity MPO Adapter for Sm APC
5 modelsClick to compare & select →
2 modelsClick to compare & select →

SPC/USB Kit for 35-040 Series and 35-065 Series. Features: iP40 protective rating — Solid objects over 1 mm; Large LCD display; Criterion A for ESD; Inch/Metric conversion; Resolution: 0.00005"/0.001 mm.