Network cable certifiers, fiber optic testers, OTDRs, and inspection tools for LAN/WAN installation and troubleshooting.
319 product families(764 total products)


Electrical Contractor Telecom Kit Is w/TS30 Test Set




The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.

The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.







The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.





5622 PRT from Fluke Calibration is designed for temperature measurements requiring fast response (0.4 seconds) or short immersion over a wide range.




The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.

The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.





















The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.













TS25D Test Set w/346A Plug

TS25D Test Set w/Abn Cord

The Fluke 110 meter is a compact true-RMS multimeter ideal for accurate electrical installation and troubleshooting. CAT III 600 V safety rated.


PRO3000 Tone Generator w/Alligator Clips and RJ11 Plug


TS30 Test Set w/Piercing Pin

TS30 Test Set w/Abn


Dbl Slt Strpr 22/24 Ga RH

Dbl Strpr w/Ctr 22/24 RH

Dbl Strpr w/Ctr 24/26 RH



Can Wrench w/Strpr 22 Ga

Can Wrench w/Strpr 24 Ga





TS52 Pro Test Set with 4 mm Banana & x-Lg Aligtr & Test Prb

CableIQ coax cable adapter kit for CIQ-100, includes F-connector, BNC and RCA connectors

Test Lead 4 mm Banana, x-Lg Alig, Test Prb for: TS54, 53, 23

TS54 Pro LCD Butt-in Test Set + TDR, 4 mm Ban, x-Lg Alig, Test Prb











2 GHz DSX Multimode OLTS Inspc V2, w/Wi-fi

CertiFiber MAX singlemode test reference cord kit for testing pinned 16-fiber MMC (very small form factor multi-fiber) connectors.
CertiFiber MAX singlemode test reference cord kit for testing pinned 12-fiber MPO (multi-fiber push-on) connectors.
CertiFiber MAX singlemode test reference cord kit for testing unpinned 16-fiber MPO (multi-fiber push-on) connectors.
CertiFiber MAX singlemode test reference cord kit for testing pinned 24-fiber MPO (multi-fiber push-on) connectors.



Certifiber MAX mm/Sm Adapter Kit (For Testing MMC16 Pinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MMC16 Unpinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MMC24 Pinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MMC24 Unpinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MPO12 Pinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MPO12 Unpinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MPO16 Pinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MPO16 Unpinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MPO24 Pinned)
Certifiber MAX mm/Sm Adapter Kit (For Testing MPO24 Unpinned)
CertiFiber MAX singlemode expansion kit for 16-fiber MMC (very small form factor multi-fiber): pinned and unpinned test reference cords and adapters.
CertiFiber MAX singlemode expansion kit for 24-fiber MMC (very small form factor multi-fiber): pinned and unpinned test reference cords and adapters.
CertiFiber MAX singlemode expansion kit for 12-fiber MPO (multi-fiber push-on): pinned and unpinned test reference cords and adapters.
CertiFiber MAX singlemode expansion kit for 16-fiber MPO (multi-fiber push-on): pinned and unpinned test reference cords and adapters.
CertiFiber MAX singlemode expansion kit for 24-fiber MPO (multi-fiber push-on): pinned and unpinned test reference cords and adapters.

Certifiber MAX Singlemode Module Set, w/Cords, No Versiv

CertiFiber MAX singlemode test reference cord kit for testing unpinned 16-fiber MMC (very small form factor multi-fiber) connectors.
CertiFiber MAX singlemode test reference cord kit for testing pinned 24-fiber MMC (very small form factor multi-fiber) connectors.
CertiFiber MAX singlemode test reference cord kit for testing unpinned 24-fiber MMC (very small form factor multi-fiber) connectors.
CertiFiber MAX singlemode test reference cord kit for testing unpinned 12-fiber MPO (multi-fiber push-on) connectors.
CertiFiber MAX singlemode test reference cord kit for testing pinned 16-fiber MPO (multi-fiber push-on) connectors.
CertiFiber MAX singlemode test reference cord kit for testing unpinned 24-fiber MPO (multi-fiber push-on) connectors.
CFM Sm Main/Remote Output Adapter

MS2-FTK copper & fiber basic technician's kit troubleshoots network cables, includes MicroScanner² and SimpliFiber Pro

Fluke Networks MT-8200-60 Kit is the first network cable toner and probe to offer digital and analog signaling all in one network toner and probe.

CableIQ remote identifier kit for CIQ-100, includes remote identifier numbers 2-4

CableIQ remote identifier kit, for CIQ-100, includes remote identifier numbers 5-7

Fluke Networks MicroScanner MS-POE remote identifier kit includes remote identifier numbers 2-7





Versiv Data Center Fiber, Copper Kit w/Wi-fi &1 Yr Gld





Want to quickly verify fiber activity, polarity, and connectivity without spending thousands? Now you can for less than $200. Check out the FiberLert.


Optifiber Pro Multimode OTDR V2, w/Inspection & Wi-Fi

Optifiber Pro Quad OTDR V2, w/Inspection & Wi-Fi

Optifiber Pro Singlemode OTDR V2, w/Inspection & Wi-Fi













Interchangeable tips for one or two rows of 8, 12 or 16 fibers, or single UPC or APC connectors • PortBright illumination for dark and crowded patch panels • Autofocus • Automated PASS/FAIL to IEC 61300-3-35

Inspect MPO and single fiber optic cables easily with the Fluke Networks FI2-7300 FiberInspector Pro including Versiv. Instant, real-time image to view the full connector down to individual end faces.

Autofocus end-face view in under a second • PortBright flashlight for dark patch panels • Small-profile probe • Pause button freezes the image • 320 x 240 display






Data Center Fiber Inspection & Fiber Detection Kit w/Wi-fi

Magnetic-strap holster compatible with the Fluke Networks MicroScanner 2 (MS2-KIT), FI-500 FiberInspector Micro, SimpliFiber Pro (SFP), and MultiFiber Pro (MFP).




Carrying case for the Fluke Networks IntelliTone toner and probe.










Buy Fluke Networks Genuine CableIQ RJ-45/11 Modular Adapter

Buy Fluke Networks Genuine CableIQ Speaker Wire Adapter


Carrying pouch with Fluke Networks logo for the TS100 and TS100 Pro Cable Fault Finders.


CFL510G handheld cable fault locator (time domain reflectometer) with 2 ns fast pulse and 5 km range. Supplied with bed-of-nails test lead set and BNC adapter for the US market.

Compact dual-channel time domain reflectometer for locating high- and low-impedance faults on paired metallic telecom cables. 0.1 m resolution, up to 20 km range, velocity factor 0.2–0.99, five output impedances (25–125 Ω) with auto-match. Xpert mode auto-positions the cursor on fault events; stores up to 100 traces. IP54 ingress protection, CAT IV 150 V / CAT III 300 V; ships with TraceXpert PC software.

TDR500/3 handheld time domain reflectometer (cable fault locator) for telecom and communications cable work.






QuickClean cleaner for 12- to 24-fiber MMC (very small form factor multi-fiber) connectors, five pack.

QuickClean cleaner for 12- to 24-fiber MMC (very small form factor multi-fiber) connectors, single pack.

QuickClean cleaner for 16-fiber MMC (very small form factor multi-fiber) connectors, five pack.

QuickClean cleaner for 16-fiber MMC (very small form factor multi-fiber) connectors, single pack.






Clip set includes RJ-45-to-8-clip test lead for CableIQ or MicroScanner
2 m breakout cord, unpinned MPO/APC (multi-fiber push-on, angled physical contact) to SC/APC connectors.
2 m singlemode breakout cord, unpinned MPO/APC (multi-fiber push-on, angled physical contact) to LC/APC connectors.
Fiber optic test reference cord for Tier 1 optical loss testing with Fluke Networks MultiFiber Pro or CertiFiber Pro test sets.
Fiber Verify test reference cord, 12-fiber singlemode, Type A polarity, pinned MPO/APC (multi-fiber push-on, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 12-fiber singlemode, Type A polarity, unpinned MPO/APC (multi-fiber push-on, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 16-fiber singlemode, Type A polarity, pinned MMC/APC (very small form factor multi-fiber, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 16-fiber singlemode, Type A polarity, unpinned MMC/APC (very small form factor multi-fiber, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 16-fiber singlemode, Type A polarity, pinned MPO/APC (multi-fiber push-on, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 16-fiber singlemode, Type A polarity, unpinned MPO/APC (multi-fiber push-on, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 24-fiber singlemode, Type A polarity, pinned MMC/APC (very small form factor multi-fiber, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 24-fiber singlemode, Type A polarity, unpinned MMC/APC (very small form factor multi-fiber, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 24-fiber singlemode, Type A polarity, pinned MPO/APC (multi-fiber push-on, angled physical contact) connectors on both ends.
Fiber Verify test reference cord, 24-fiber singlemode, Type A polarity, unpinned MPO/APC (multi-fiber push-on, angled physical contact) connectors on both ends.
Data Center mm 850 & Sm 1310 MPO Troubleshooting Kit
LC/APC (angled physical contact) to LC/APC duplex adapter.
MMC (very small form factor multi-fiber) adapter/coupler, 12/16/24/32 fiber, single, green, dust plug.
SC/APC (angled physical contact) to SC/APC duplex adapter.
Type A Polarity MPO Adapter for Sm APC
30 W, 15 V 2 A power supply with US, EU, AU, and UK adapters. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
30 W, 15 V 2 A power supply with US adapter. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
30 W, 15 V 2 A power supply with US, South Africa, and India adapters. For Fluke Networks LinkIQ, DSX, and Versiv cable testers.
South Africa and India plug adapter for the 30 W power supply (PWR-SPLY-30W).