Family Owned & Operated Since 1971• Bakersfield, CA
Controllers, transmitters, signal conditioners, HART communicators, and PLCs
10434 products
Compact industrial and OEM pressure transducer with a 0–100 mV analog output (10 VDC excitation) and a 316 stainless steel isolation diaphragm — accurate to better than ±0.3% of full scale. Gauge, compound, or absolute; ranges from 0–1 PSI to 0–3000 PSI; 1/8 in or 1/4 in NPT with an 18 in cable or Packard connector (non-isolated brass option for clean, dry media). Configure type, range, and connections to build your part number.
Digitally compensated industrial pressure transducer offered with a wide choice of outputs — 4–20 mA or 1–6 / 1–5 / 0.5–4.5 / 0–5 VDC — and accuracy better than ±0.3% full scale over pressure (±1.0% over the full compensated temperature range). Gauge, compound, vacuum, absolute, or static-pressure types; ranges from 0–1 PSI to 0–3000 PSI; 316 stainless steel or brass process connection with cable, conduit, DIN, or Packard termination, plus an optional on-board temperature output. Configure type, range, output, and connections to build your part number.
Digital meter/controller for AMETEK submersible level transmitters — a fully calibrated, microprocessor-based display with relays and optional analog retransmission. 110/220 VAC or 12/24 VDC input; display-only or two/four relays; optional 4–20 mA analog output; panel-mount or NEMA 4X weathertight housing; and optional lightning/surge protection on the signal and power lines. The engineering units shown and the paired transmitter model are specified at order. Configure power input, output, housing, and lightning protection.
Compact intrinsically safe pressure transmitter for hazardous-area measurement — chemical and petrochemical manufacturing, control skids, and oil & gas wellheads. Stainless steel isolation diaphragm (Monel or Hastelloy optional) in a 316 stainless steel housing, ±0.2% FS (BFSL) typical, with a wide choice of 4–20 mA or VDC outputs. FM (US/Canada), ATEX (Dekra), and IECEx approved. Ranges from 0–1 PSI to 0–5000 PSI (0–0.07 to 0–340 bar). Configure protection, output, connection, and pressure to build your part number.
Rugged, compact general-purpose pressure transducer with a 1–6 VDC output (8–15 VDC excitation) and 316 stainless steel wetted parts — accurate to ±0.25% BFSL, with 3× burst pressure and an IP-64 rating. It ships fully compensated for pressure and temperature and is interchangeable without recalibration, with a standard Packard connector. Gauge, sealed, compound, vacuum, or absolute; ranges from 0–10 PSI to 0–5000 PSI. Configure type and range to build your part number.
Next-generation AMS Trex on a modern, faster platform with embedded Bluetooth connectivity — same HART / FOUNDATION Fieldbus / WirelessHART communication core as the classic Trex but with improved accuracy, faster device discovery, and over-the-air pairing with Bluetooth-enabled Rosemount transmitters and Fisher valve controllers. Larger, brighter color display. ValveLink Mobile and AMS Device Configurator app integration. The right choice for new field-communicator purchases — better hardware, future-proofed for the Bluetooth-instrumentation transition.
Electropneumatic valve positioner with 4-20 mA + HART, simple installation, and automatic commissioning. Configured with Aplisens Raport 2 software or HART communicators; mounting kits available for linear and rotary actuators.
Temperature and humidity controller with integrated sensor (optional 1.5 m cable or stainless-tube probe) for heating/humidification and cooling/drying control. Range -30 to 80 C and 0-100% RH, PID with autotuning, three relay/SSR outputs, optional Modbus RTU.
Panel and DIN-rail temperature controllers with Pt100 and thermocouple inputs, ON-OFF or PID with autotuning, relay or SSR output, and binary start/stop input. Sizes 48x48, 72x36, 96x48 panel and 3-module rail versions.
Temperature controllers with built-in timer function, Pt100 and thermocouple inputs, ON-OFF or PID with autotuning, and two relay or SSR outputs. Panel sizes 48x48 (AR603) and 96x96 (AR613).
Temperature controllers with front setpoint knob, Pt100 and thermocouple inputs, ON-OFF or PID with autotuning, and relay or SSR output. Panel sizes 48x48 (AR604) and 96x96 (AR614).
Panel temperature controller with two setpoints on dual green LED displays, Pt100 and thermocouple inputs, ON-OFF or PID with autotuning, and two relay or SSR outputs. 96x48 mm panel format.
Universal process controllers with large four-color LED display, universal RTD/TC/mA/V/mV/ohm input, three relay/SSR outputs plus analog output, 24 V transmitter supply, and optional Modbus RTU. Panel 96x48 (AR650) or field enclosure (AR630).
Two-input universal controllers with RTD/TC/mA/V/mV/ohm inputs, PID with autotuning, STB safety function, three relay/SSR outputs plus analog output, and Modbus RTU/TCP with MQTT options. Panel 96x48, DIN rail, and field-enclosure versions.
Large-format 144x72 panel universal controller with RTD/TC/mA/V/mV/ohm input, PID with autotuning, three relay/SSR outputs, analog output, 24 V transmitter supply, and optional Modbus RTU.
Universal controller family with RTD/TC/mA/V/mV/ohm input, three relay/SSR outputs, analog output, STB safety function, Modbus RTU/TCP and MQTT options, and micro-USB configuration. Panel sizes 48x48 to 96x96, DIN rail, and field-enclosure versions.
Wall-mount IP65 indicator for 4-20/0-20 mA and voltage inputs with 20 mm red LED display, two relay outputs, RS485, and integrated 24 VDC transmitter supply.
Panel indicator for current (4-20/0-20 mA), voltage, and Pt100 inputs with 2 or 4 settable relay outputs, RS485, integrated 24 VDC transmitter supply, and 85-260 V AC/DC power.
Loop-powered 4-20 mA field indicator with backlit display, configurable -99999 to 99999 range, and aluminum wall or pipe-mount casing, IP66. Options include IP67, intrinsically safe Exia/Exia(Da), and capillary-cable PP version.
The Fluke 154 HART Communicator is a standalone tablet based tool that wirelessly connects to the HART transmitter. See the specs or talk with an engineer.
The Fluke 3540 FC Three-Phase Power Monitor measures critical parameters on three-phase systems and wirelessly streams data to the Fluke Connect Cloud. You can access and track data as well as receive alarms to a mobile device or PC through Fluke Connect Condition Monitoring software.
Loop Calibrator, with HART
The Fluke 710 mA Loop Valve Tester calibration tool performs quick, easy tests on HART smart control valves. Get the specs & details. Your solution awaits here.
Low Cost Sensor / Transmitter for H2S or CO, Non Explosion Proof