Calipers, micrometers, gauges, and surface roughness testers
540 products

iP54 Fastener Cal digital caliper that reads common fastener sizes in inch and metric, 0-6"/150 mm range, 0.0005"/0.01 mm/1/128" resolution, 0.001"/0.02 mm accuracy.

iP65 EZ Data Twin-Force digital micrometer, 0-1"/25 mm range, 0.00005"/0.001 mm resolution, 0.00015"/0.003 mm accuracy. Coolant, grit and dust proof; friction and ratchet movement; Micro USB data output.

7" layout square: laser-engraved 16ths and 32nds scales with marking holes, 5-60° angle holes, blue anodized aluminum base; squareness ±0.006".

Heavy-duty extended range dial caliper, 0-12" (inside from 0.4") range, 0.001" graduation, ±0.002" accuracy, 2.875" jaw depth; long jaws, side lock, white dial.

Dial caliper, 0-6" range, 0.001" resolution, 0.0015" accuracy. Shock-absorbing design with a reinforced aluminum casing; measures inside, outside, depth and step. Supplied in a protective case.

DJI Zenmuse P1 (Camera Only). Full-frame photogrammetry payload for DJI enterprise mapping drones.

Matched pair of 1-2-3 blocks, precision ground and case hardened on all six sides (56-60 RC). Squareness within 0.0001", parallelism and matched accuracy 0.0002", 23 holes (5 tapped 3/8"-16, 18 untapped).

Universal bevel protractor, 360° dial: clockwise or counterclockwise readings, 1° dial and 5-minute vernier graduations, ±5 arc minutes accuracy; 6" and 12" blades, hardened stainless steel, in a protective case.

Adjustable double square set, 4"/100 mm and 6"/150 mm: hardened chrome-plated blades with E/M graduations (1 mm, 64ths, 32nds and 1/2 mm); accuracy meets Federal Specifications; in a protective case.

2-piece precision angle plate set: 30-60-90° and 45-45-90° plates, ±20 arc seconds, 1/4" thick, hardened and precision ground, with mounting holes, in a protective case.

6" Auto Center Punch

12" center and bevel finder rule in hardened stainless steel with a chrome finish. Center-finding side reads 32nds and 64ths with 15° and 30° bevel marks; bevel-finding side reads 16ths and 8ths with 22.5°, 45° and 60° marks; 2" height-finding gauge on both sides.

12" center finder and bevel rule, 12.5" x 3", aluminum with a black anodize finish. Ruler side: center rule on top in 32nds, left-to-right scale on the bottom in 16ths. Bevel gauge side: 0-50° angle scale with 1/2° marks and 1/4° dots, plus a 3" rule on the end. Lines and numbers etched in white.

iP54 DigiDepth digital depth gauge: 0-6"/150 mm, or 0-16"/400 mm with the five included extensions; 0.0005"/0.01 mm/1/64" resolution, large LCD, 2" x 1/4" base.

iP54 digital brake drum gauge: 4-20"/100-500 mm range, 0.0005"/0.01 mm/1/64" resolution, ±0.003"/0.07 mm accuracy; 4" drum preset, 1" and 1.5" depth pins.

Shore A digital durometer: 0-100 HSA range, 0.5 H resolution, ±2 HSA accuracy, deviation under 1% H; ergonomic, lightweight.

0-0.5" Digital Indicator, 0.0005", 0.01mm, 1/128"

Digital rotor gauge: 0-3"/75 mm range, 0.0005"/0.01 mm/1/64" resolution, ±0.001"/0.02 mm accuracy, 3.5" jaw depth, carbide-tipped faces.

Digital SnapThick gauge: 0-1"/25 mm range, 0.001"/0.02 mm/1/64" resolution, ±0.001" accuracy; spring-loaded arm, fixed alloy jaws with chrome finish, LCD with HOLD.

Digital thickness gauge, 0-1" range, 1" throat depth, 0.0005"/0.01 mm/1/64" resolution, ±0.001" accuracy. Spring-loaded lever with quick release, 6 interchangeable contact points, large LCD with HOLD; battery and protective case included. Data output with the 35-128-USB cable.

9" eLevel precision digital laser level, a 2-in-1 digital level and bevel gauge: 0-90° x 4 tilt range, 0.05° resolution, ±0.2° accuracy, cross-hair laser and two vials for plumb and level. Aluminum alloy body with magnets on the bottom and a 1/4" tripod thread; 9V battery and soft carry bag included.

iP54 EZ Digital Miter Gauge with 18" fence: LCD reads 70°-0°-70° with 0.05° resolution and 0.2° accuracy. 18" x 3/4" x 3/8" miter bar with four adjustable spring plungers for standard U or T slots and a locking push handle; extruded aluminum fence with a sacrificial 19" wood face and flip stop. CR2032 battery included.

EZ View 360° digital protractor and rulers, 5"/125 mm: black anodized aluminum blades with 32nd and mm scales front and rear, 0-360° range, 0.05° resolution, ±0.2° accuracy; measures inside and outside angles and length.

26-Piece Filler Gauge