Industrial scales, load cells, indicators, test weights, and force gauges
8970 products

Consisting of three different weigh module designs, the Paramounts system offers superior accuracy, even in applications with extreme expansion, contraction and vibration. The fixed-pin module acts as the vessel’s primary reference point, enabling rotation. A single side-stop module is then paired with the fixed-pin module to permit mechanical expansion and contraction in one direction. The vessel then becomes a high-accuracy weighing system with the addition of one to six free-sliding modules. This system offers the free motion necessary to eliminate unwanted mechanical side loads, as well as the strength needed to keep the vessel in check. This gives the Paramounts system its industry-leading reputation for exceptional accuracy in unfriendly environments. Integral jacking/shipping bolts enhance safety by preventing accidental lift-off, facilitating quick field removal of load cells and eliminating load cell damage during transportation. Matched outputs and field-replaceable cable simplify installation and enhance serviceability. The Paramounts system represents the ultimate combination of convenience, accuracy and control. • One fixed-pin module, one side-stop module, and one or two free-sliding assemblies. Each module is complete with a Flintec SB4 stainless steel hermetically sealed load cell. • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of our hostile environment EL147HE SURVIVOR load cell cable

The SURVIVOR RL1600 HE mounting weigh module kit utilizes several Rice Lake Weighing Systems components to provide an unmatched level of performance in tank and hopper weighing applications. The RL1600 HE kit is ideally suited for indoor and outdoor process control operations in the medium-capacity ranges. Each module incorporates self-checking capabilities for thermal expansion and contraction. • Three or four RL1600 HE stainless steel compression mounts with RL75016WHE stainless steel, hermetically sealed double-ended shear beam load cells • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of our hostile environment EL147HE SURVIVOR load cell cable

Can be used in areas where explosive gas and dust mixtures occur • Documentation to verify intrinsic safety available upon request • Built for easy cleaning and disinfection • Meets HACCP and FDA requirements for the food industry • Pit frames for flush mounting available • High resolution of 30,000 d

The 220 Universal Mount is designed to be used with the Vishay Tedea-Huntleigh Model 220 load cell. The mount incorporates built-in jacking bolts to prevent damage to the load cell during installation. Its stainless steel construction is designed to be used in the harshest of environments. • Three or four 220 stainless steel compression mounts with 220 stainless steel hermetically sealed compression disk load cells • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of hostile environment EL147HE SURVIVOR load cell cable

Rugged washdown design • 304 stainless steel construction • Rigid stainless steel tube frame • Four stainless steel, hermetically sealed, IP69K shear beam load cells • Load cells protected on all four sides • 20 ft (6 m) of SURVIVOR EL147HE hostile environment load cell cable • Remote junction box can be located up to 10 ft away from scale • Four adjustable stainless steel SUREFOOT support feet • Removable polyethylene deck (deck weight: 80 lb (36.6 kg) on 4 × 4 ft size) • Side brackets to hold deck during washdown

Steel construction with diamond treadplate surface • Available in multiple widths (3-5 ft) and lengths (3-4 ft) • Capacity ratings from 2,000 to 10,000 lbs • Optional side rails for enhanced safety • Pit frame options for recessed scale installations

Nickel-plated high-alloy steel construction • Suitable for single or multiple-cell tension load applications • Capacities range from 25 to 20,000 lb • Includes 20 ft of load cell cable • Environmentally sealed with stainless steel side plates • NTEP and FM approvals

High-capacity single point load cell • Weighs loads from 50 to 1,000 kg • Off-center loading capability • Potted design for damp environments • Long-term stability and durability • NTEP and FM approvals

Low-profile design for retail and platform scales • Movement-compensated for accuracy • Aluminum construction with protective coating • Capacities from 3 to 100 kg • Includes 3 meters of load cell cable • NTEP, OIML, and FM approved

Customizable color touchscreen with graphical user interface • User-defined softkeys, icons and graphics • Tactile keypad for scale operations, numeric entry and navigation • On-screen keyboard available during entry mode (or external keyboard) • Built-in web server for remote access, systems integration and data monitoring • Multi-language operation and text entry • Supports eight scales within five different kinds: Analog load cell, multi-range/interval weighing Total scale summing Serial input scales iQUBE³ and iQUBE² scales Program scales • Six smart card slots for additional scale channels, serial ports, digital inputs and outputs, analog outputs and protocol interfaces • iRite Programming Software Five built-in applications: Truck In/Out, recipe storage, filling/dosing, counting, checkweighing Customizable user programs with event-based functions 150 built-in functions for common processes and data tables Customize and transfer data via email, FTP server and networked printers Display data with line charts or bar graphs iRite reporting of iQUBE alerts • Email, USB, Ethernet TCP/IP, Wi-Fi Direct, two serial ports RS-232 or RS-485 • Alibi memory captures serial port transmissions • Four configurable data-stream formats for PC, printers and remote displays • 100 setpoints, 18 configurable setpoint types • Eight digital I/O for control and pulse count • Three different enclosure types: universal with tilt stand, panel mount and wall mount

Low-profile single point design • Aluminum construction with IP66 seal • Capacities from 3 to 35 kg • NTEP and cFMus approved • 2.0 mV/V output with 0.03% combined error

Nickel-plated alloy steel construction • Suited for batching, filling and hopper/tank weighing • Capacities from 250 to 40,000 lb • Environmentally sealed IP67 rating • Includes 20 ft of load cell cable • NTEP and cFMus approved

Fluid dampened design for high-speed weighing • Reduces weighing time and improves accuracy • Endures shock-loading and harsh conditions • Environmentally sealed IP66 protection • Capacities from 2 to 50 kg • Available in stainless steel or alloy steel

Nominal value is marked on weight and sold as individual part • Sealing cavity for adjusting material in 100 g or larger weights • Density 7.84 g/cm3

Single calibration weight (case not included) • Stainless steel weights designed to meet NIST Handbook 44 and ASTM E617-23 • Sealing cavity for adjustment for most weights, 100 g or larger • Nominal value marked on weights

The IQ plus 2100 digital bench scale is ideal for use in general purpose weighing, portioning, and a variety of food processing applications. Stainless steel buttons repel messy ingredient spills and damage by knife point, while the NEMA Type 4X stainless steel indicator enclosure stands up to frequent washdowns. Standard overload stops protect the base during heavy use. All operations are controlled through two buttons—zero and units. Push-button zero and a full range of units, including lb/oz, offer the flexibility needed for a wide variety of applications. • 304 stainless steel construction • Large LED display • Two digital inputs for remote zero, print and units • 12 in column, attachment bracket or tilt stand for table, wall or under counter mounting • Aluminum, single-point load cell • Overload and upload stops on scale base • Stainless steel, non-tactile feel, piezo zero and units buttons • Unit of measure: kg, g, lb, oz, lb/oz (lb/oz is not Legal for Trade) • PreVent breather vent • Factory calibrated

Alloy steel construction with nickel plating • Single-ended beam design for 250-20,000 lb capacity • 20 ft cable with FM approval and NTEP certification (500-10,000 lb) • IP66 environmentally sealed rating • 3.0 mV/V output with 0.017% combined error

Three or four neoprene isolation/compression mounts with load cells 50 to 250 lb model: RL50219SS 500 lb model: multiple stainless steel, single-ended beam modules available • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of hostile environment EL147HE SURVIVOR load cell cable

The RLTM weigh module assembly features a stainless steel, welded sealed RL30745 load cell and a fully stainless mount including all associated hardware. Using a rocker pin-loading concept, this design provides accurate weighing in most conditions. Standard features include both overload and overlift protection, making it ideal for most outdoor low-capacity tank and vessel weighing applications. Each Rice Lake RLTM module is provided standard with one load cell with 30 ft of cable and one mount. • Three or four Rice Lake RLTM stainless steel mounting assemblies with RL32018S-T NTEP Certified, welded-seal stainless steel load cells • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of hostile environment EL147HE SURVIVOR load cell cable

The internal height adjustment feature of the SURVIVOR RL1855 HE weigh module reduces the need for shims or external hardware, simplifying installation. The standard conduit adapter allows for connection to conduit for cable protection. With standard NTEP Certified, 1:5000 division Class III load cells, the RL1855 HE weigh module provides an accurate weighing system when properly installed. Highly versatile, the RL1855 HE weigh module offers worry-free operation in a wide variety of rugged applications. • Three or four RL1855 HE stainless steel mounts with RL32218S-HE NTEP Certified hermetically sealed stainless steel load cells • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of hostile environment EL147HE SURVIVOR load cell cable

Stainless steel construction for corrosive environments • S-beam design ideal for scale conversions • Trimmed outputs for simplified installation • NTEP certified capacities from 100-10,000 lb • Includes 20 ft of load cell cable • IP67 environmentally sealed rating

The PR6202 range of load cells is specially designed to meet the high demands of the food, pharmaceutical and chemical industries. These products are made completely from stainless steel and are specially designed for use with process vessels. All horizontal surfaces are inclined for easy draining, and gaps and undercuts have purposely been avoided. The materials and surface quality were also selected to ensure the load cell meets tried and tested international standards and specifications. • Proven rocker pin principle for accurate repeatability • Easy corner adjustment by matched load cell output • All stainless steel construction (316 stainless steel load cells) • Wide operating temperature range • High overload capacity • Resists vibration for consistent high accuracy • Hermetically sealed, IP68/69K (depth of 1.5 m for 10,000 hours) • EX-version available (PR 6202/..E) • 10,000 division load cell, 2 mV/V • 15-year warranty • 50 kN destructive lateral force, and 25 kN permissible lift-off protection • Foot 35 kN lateral force and lift-off protection

Stainless steel weights designed to meet NIST Handbook 44 and ASTM E617-23 • Class 5 tolerances • Sealing cavity for adjustment for most weights • Serial numbers may be stamped on weights (option) • Nominal value marked on weights

OIML E1, E2, F1 and F2 polish finish • OIML M1 and M2 satin finish • Density for E1/E2 is 7.95 g/cm3 (unless otherwise noted, 1 mg, 2 mg and 5 mg are aluminum, and density is 2.7 g/cm3) • Density for F1/F2/M1/M2 is 7.84 g/cm3 (unless otherwise noted, 1 mg, 2 mg and 5 mg density is 2.7 g/cm3, 10 mg to 500 mg density is 7.95 g/cm3) • E1 and E2 are supplied with Accredited Certificate per OIML R111 • E1, E2, F1, F2 and M1 weights include protective case