Weighing & Force

Crimper Die 2026 Die, Engraved 2026

Lead and wire seals are often used with small diameter openings such as drums, hoppers and valves. • 5.0 in (127 mm) seal press with two 0.5 in (13 mm) engraving dies • Chrome finish • Maximum number of characters that can be engraved on die is nine • Compound leverage • Quick delivery on custom dies

Scanner, PowerScan PM9100 Wireless Scanner Model PM9100-910RB w/o Display, Battery, SR, 915 MHz, RS232 or Keyboard Wedge

Wireless operation • Operates up to 10 hours on a single charge • Datalogic’s patented "Green Spot" technology for good-read feedback • Polycarbonate molded with rubber • Multi-point operation allows for multiple scanner communications to a single base station • Linear imager

Direct Thermal Tag, 3 in × Continuous Roll, 7.2 mil, 3 in Core, 8 in OD, 480 ft Roll, Wound Out

3 in wide × continuous roll • 7.2 mil thickness • 3 in core, 8 in OD • 480 ft per roll, wound out • Direct thermal printable

Cable, Communication Cable EL144 2 Wire Shielded Custom Cut Length. 2 Conductor Cable.

Two-conductor with bare ground • RFI/EMI protected with foil shield • 20 gauge conductors • Perfect for RS-232, two-wire RS-485 and 20 mA current loop communications • Diameter: 0.19 in • Conductor colors are black and white

Eye Nut, 1/4-20NC 500 lb Steel Zinc or Galvanized Plating

Drop-forged steel, tapped NC right-hand threads

Cable, Plastic Optic Fiber, Duplex 1.00mm Core 2.2mm OD Fluorinated Polymer Jacket Price Per Foot

Duplex cable polyethylene black jacket material • Plastic fiber core • 4.4 + 0.10 mm outer diameter of duplex cable • 2.2 + 0.007 mm single cable outer diameter • Operating temperature: 32 °F to 158 °F (0 °C to 70 °C)

Board, Go-between RS-232 to USB data storage

LED onboard for testing data transmission • Captures data and stores it on a USB flash drive (up to 8 GB not included) • Transfer data to your PC using the USB flash drive • Text file examples (actual text will be dependent on transmitted file) • 02:50PM11/13/2012GROSS 58 lb • 02:50PM11/13/2012GROSS 68 lb

Swivel Foot, 1/2-13NC 1-7/8DIA 1,000-10,000 lb Steel Plated No Stem

Replacement feet adapt to most floor scales • Available in mild steel or stainless steel • Simple swivel design • Use with single-ended shear beams or bending beams to provide a large, flat load introduction surface

Load Button, Convex 3/8-24 UNF 17-4PH SST Condition H900

Suitable for use with compression mounting assemblies, canisters, S-beams and single-ended beams • Hardened alloy steel

Foot, Floor Scale Rigid Polyurethane Rubber 1.875Dia 1/2-20 UNF SST Stud Slotted, SST Jam Nut, 3.000 Height

Stainless steel stem for corrosion resistance • Heavy-duty construction, low-cost replacement feet • Four standard diameters all with 1/2-20 UNF stainless steel stud, slotted for top-access applications • Stainless steel jam nut provided • Top of stud is machined undersize 10% for easy alignment into load cell

Load Cell, CSR RL70510-30t 30t 15ft stainless overbraid 2mv/v 1000 Ohm EW SST HS NTEP IIIL 10M IP69K

Load Cell, CSR RL82025-30t 30t 18m SST over braid cable 6 cond 2mv/v 700 Ohm NTEP IIIL cFMus SST IP69k surge protection

Brush, Static, 1-inch NRD Staticmaster 1-inch Static Control Brush

Pad, Anti Vibration NR W/AL 50+/-5 Durometer 4 x 4 x 1/2 To Place Under The Foot of a Balance

Balance slabs • Balance tables • Anti-vibration

Link, Weldless 7/8x5-1/8 Inside Length 12,000 lb Alloy Steel Galvanized

Self-colored or hot-dip galvanized finish • Forged carbon steel quenched and tempered

Load Cups, RLSCA Stainless Steel, Upper and Lower Cups Included, TWO CUPS PER BAG.

Bolt Assembly, 7/8-9NCx15 And Nut 7/8-9NC, Heavy Hex

Pivot, 7/16x7/8x1

Chair Girder, Holman Fairbanks

ATS Kiosk, 1280 Kiosk TOP 12 inch with 1500 NIT Display, 304 Stainless Steel, Thermal Printer, With Printer Slide Door Access and Basket, Heater 115VAC, No A/D

12-inch 1280 color touchscreen • Stainless steel or mild steel enclosure • 1,500 NIT display • Two serial ports RS-232 or RS-485/422 • Operator prompting • Formattable tickets • Transmits weight to remote display • 120 or 220 VAC • 460 MB onboard database • Ethernet TCP/IP (wired and Wi-Fi) • Web server • Direct thermal printer • Internal heater • Slide door access to ticket • Works with standard 1280 programs, customization available • One-year warranty

Ball, 5/8 DIA Chrome Plated Steel

Use with load cup and load receiver to build a custom scale • 52100 chrome alloy steel

Foot, Bench Scale 1/4-20NC x1-3/16 SST

Rubber pad, 1/4-20 UNC thread • Stainless steel, 3/8-16 UNC thread

Bearing, 1x1x6-1/2 .281 Hole Through The Side

Saddle Block