Weighing & Force

Caster Portability Frame Roughdeck 2.5 x 2.5 mild steel 1K to 5K Two rigid forged steel caster on the front, Two swivel forged steel casters with lock on the back

Painted mild steel • Indicator stand fits 480 Legend weight indicators • Two rigid forged steel casters, two swivel forged steel caster with lock on back • Casters for scales 1,000 to 5,000 lb are rated for 4,000 lb each

Indicator, Convertor SCT20-AN, 12-24VDC, Analog Output, and RS485/232 Serial Port, DIN Mount

The SCT-20 is a compact solution for gathering weight data from scales. The signal transmitter powers up to eight load cells and has pushbutton or preset tare options to keep scales accurate. Data can be converted to analog, or optional DeviceNet, Profibus and EtherNet/IP protocol outputs. • Space saving, vertical shape with DIN-rail mounting • Displays weight, configuration, calibration and error conditions • Theoretical calibration, real-weigh calibration, linearity calibration • Push-button or preset tare • Converts digital weight to analog output or optional DeviceNet or PROFIBUS or EtherNet/IP protocol • Supports ASCII or Modbus RTU protocols • Full-scale analog output with zero setting and PLC correction of analog signal • Bit swapping selection for little endian and big-endian format • Two digital inputs, three digital outputs • One serial port, RS-232 transmit only, or RS-485 half-duplex connection

Kit, Traffic Light Pole Includes 8ft Aluminum Pole, base & four 18 inch anchor bolts with nuts and washers. Option: Pole Cap(PN 179172)

Housing meets or exceeds ITE specifications • Stainless steel hardware • 8-in LED lights, enclosure injection molded polycarbonate • LED modules • Compliant to ITE UTCSH - LED circular signal • Temperature compensated power supplies for long LED life • Conformal coated power supplies • Intertek/ETL certified and listed on ETL certification program

Box, Load Cell 6 x 7-5/16 x 11

Stand, Upper Supports and Bearing Block Assembly

Rocker Pin, .593 dia.x1.25 long. For 500-2.5k capacity load cells.

CONN, Series RJF544 Kit Ethernet, RJ45, Includes Plug, Receptacle, Gasket, And Dust Caps

Allows an Ethernet Class D/Category 5e connection for 10Base-T, 100Base-TX, or 1000Base-T networks in harsh environments • Sealed against fluids and dusts (IP67) • Shock, vibration and traction resistant • No cabling operation in the field • No tools required • Improved EMI protection • Uses a standard RJ-45 cordset in protective composite plug to protect from shocks, dust and fluids • In-field cabling and grounding not necessary

Reader, Long Range HID iClass SE U90, use 184459 HID cards. UHF Reader 902-928 MHz

Discreet hands-free authentication solution for long range parking, gate control and truck identification • IP65 rating allows outdoor mounting • Supports Wiegand standards • Requires Wiegand converter, consult with a sales engineer with application specifics

Contactless, Smart Card 25 Pack, Numbered 1-25, HID, 13.56 MHz, 26-Bit, H10301 Format, Facility Code 001 Internal Card Number And External Printed Number Match

More powerful and versatile access control • User-friendly proximity technology • Uses the 13.56 MHz technology platform • High-intensity, three-color light bar provides clear, visual feedback, even in direct sunlight • Selectable, distinct tone sequences indicate status conditions • All RF data transmission between the card and reader is encrypted using a secure algorithm • Close range

Bearing, Load Cup 2 ODx 1-1/2 Steel

Missing Link, 1/4in 1,325 lb Steel Galvanized

Drop-forged carbon steel, heat-treated, hot-dipped galvanized finish

Nut, CPLG 1/4-20NCx1-3/4 7/16 Heavy HEX Width Across Flats=7/16 Length=1-3/4 Steel Zinc Plated Minimum Tensile Strength=60000 Psi Safe Load=500 Lbs

Heavy hex

Cable Assembly, EL148HE 8ft Toledo Power Cell Replacement Cable Stainless Steel Overbraid

100% stainless steel military connector-electro deposited nickel plating with stainless banding and epoxy heat-shrink strain relief • Stainless steel arctic ring precision cut for improved connection • Textured rubber boot for additional grip • Standard Mettler Toledo color code • Compatible with Mettler Toledo Powercell CMOS/NMOS and MTX load cells. NOT compatible with Mettler Toledo PDX load cells. • Custom lengths available

Ground Strap, 12in Tinned Copper Braid

Used in the ITCM assembly • Tinned copper braid • Crimped sleeve on ends with 0.25 in hole • Available in 12 in, 14 in, 16 in, 24 in or 32 in lengths

Buzzer, 90 dB 120VAC Sonalert alarm sounder

Visible lights and audible alarms • Manual pushbuttons/pushbutton switches Key switches Lighted pushbuttons Pilot lights Two- and three-position switches Colored pushbuttons Emergency stop mushroom switches Custom legend plates

Ionizer, 1 x 3-inch NRD Staticmaster 1 x 3-inch Ionizing Unit

J-Box, JB8SP 8 Channel Signal Trim with Expansion, Polycarbonite Nema 4

Assembly, Vehicle Detector Includes prewired loop detectors, terminals for wiring lead wires from loops and power source. (loops not included)

Loop diagnostics • Loop isolation transformer • Loop conditioner • Aluminum RF shield housing • Surge protection • Loop frequency counter • 10 gold-plated sensitivity controls • Eight gold-plated function controls • Six gold-plated controls for frequency, reset and frequency counter • Two high-intensity LED indicators • Two relays—relay 2 is pulse or presence

Caster Portability Frame Roughdeck 2.5 x 2.5 mild steel 1K to 5K, Electronics not included Two rigid forged steel caster on the front, Two swivel forged steel casters with lock on the back, with drawer for SENDit

Wireless connection from scale to operator display • Works with any basic digital weight indicator • Excitation to the load cell(s) provided by the transmitter, not the indicator • Each transmitter/receiver set is individually paired and will not interfere with another set • Transmitter excitation voltage: +4.8 VDC, 16 × 350 ohm or 32 × 700 ohm load cells

Bearing, 5/8x1-1/4x7 Steel

Foot, Floor Scale SUREFOOT 1/2-20NFx3.47DIAx2.62 SST stem and Neoprene Rubber bottom

Replacement foot, adapts to most floor scales • Use with single-ended beams to provide large, flat, adjustable introduction surface • Special neoprene rubber sandwich base gives high accuracy, linearity and repeatability

Ribbon CRTG, RC300P Purple Star SP300 Series

Cartridge-type • Ribbon life approximately 3 million characters

Cart, Benchmark MSC-40 stainless steel designed for 12x18 Benchmark HE-X scale

The BenchMark MSC mobile scale carts are ideal for applications where bench scale portability is necessary. The cart is designed with two rigid and two swivel casters with locking wheel brakes. With a stand to help move the cart and mount the weight indicator, weight readings will be easily visible to the operator. • Two swivel, locking casters and two rigid casters • Rugged washdown design meets Sanitary Design Principles

Weight Case, Acrylic 3.045x6.045x1.847 ID.Dimensions 100g-1mg, Insert Sold Separately

Ideal for all clean room environments • Tough, clear acrylic protects your valuable investment • Provide compliance for stringent clean room requirements • Not recommended for shipping, developed exclusively for storage • Available as an accessory only • Optional custom inserts available on request