0085 Pipe Clamp Temperature Sensor
SKU: 0085
Non-intrusive pipe-clamp temperature sensor — the key piece of Rosemount X-well Technology. Wraps around the outside of a pipe with a thermally-conductive clamp to measure internal process temperature without a thermowell or process penetration. Single-element 4-wire (P1) or dual-element 3-wire (P2) silver-tip RTD, -58 to 572 °F. Pairs factory-assembled with a Rosemount 3144S / 3144P / 648 transmitter and an X-well thermal-conductivity algorithm to back-calculate the internal process temperature. Wide pipe-size selection — DN15 through DN1500 / ½-60 inch — with clamp materials in 316 SST, 304 SST, Super Duplex, and Carbon Steel.
Contact us for pricing on this product.
Non-intrusive pipe-clamp temperature sensor — the key piece of Rosemount X-well Technology. Wraps around the outside of a pipe with a thermally-conductive clamp to measure internal process temperature without a thermowell or process penetration. Single-element 4-wire (P1) or dual-element 3-wire (P2) silver-tip RTD, -58 to 572 °F. Pairs factory-assembled with a Rosemount 3144S / 3144P / 648 transmitter and an X-well thermal-conductivity algorithm to back-calculate the internal process temperature. Wide pipe-size selection — DN15 through DN1500 / ½-60 inch — with clamp materials in 316 SST, 304 SST, Super Duplex, and Carbon Steel.
The Rosemount 0085 Pipe Clamp Temperature Sensor 0085 is manufactured by Rosemount. Valley Instrument Service is an authorized Rosemount dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681Configure Your Rosemount 0085 Pipe Clamp Temperature Sensor
Non-intrusive pipe-clamp temperature sensor — clamps onto pipe exterior for fast, easy temperature measurement without process penetration. RTD or thermocouple element. Pairs with Rosemount 148, 644, or 3144P transmitter.
Required Specifications
8 of 8 selected- Connection Head / Conduit Entry:
- NNo connection head
- Sensor Connection:
- 3Spring loaded adapter+$108.48
- Sensor Type:
- P1RTD, single element, 4-wire, silver tip; -50 to 300°C range
- Extension Type:
- NNo extension
- Extension Length:
- 008080 mm
- Pipe Clamp Material:
- NMaterial Info not required (still must select inner diameter)
- Inner Diameter / Pipe Size / Conduit Entry:
- 10161016 mm / 40" / DN1000 / 70 x 10 mm, M24
- Corrosion Protection Inlay:
- NNot included
Rosemount is configurator-heavy and quote-only. Valley Instrument verifies option compatibility, lead time, and pricing before confirming your order.
Related Products
214A Temperature Sensor (Built-to-Order)
Built-to-Order custom RTD and thermocouple sensor — the flexibility platform of the Rosemount temperature line. Industrial, Cable, Surface, and Bearing sensor designs covering applications where the standardized 214C / 214C-TC / 68Q families don't fit: surface temperature on rotating equipment bearings, cable-style sensors with flying leads or MI sheath, special-purpose mounting (bayonet, screw-in cable, DIN plate). RTD types: thin-film PT100/PT1000 (best for vibration), wire-wound PT100/PT1000 (best for accuracy). TC types: E, J, K, N, T. Multiple sheath materials, diameters, and wire-configuration options (single/dual, 2/3/4-wire RTDs, grounded/ungrounded TCs). Most configurations require a Configuration Data Sheet (CDS) at quote — the encoded options below capture the major decision points; finer details get specified during the quote process.
214C Temperature Sensor
Industry-standard temperature sensor — RTD (PT100) and thermocouple (J, K, T, N, E) variants for tough process environments. Standard outside diameter ¼-in (6 mm). Two element technologies: wire-wound (best for low-temperature accuracy, -148 to 842 °F) and thin-film (best for vibration/physical shock, high-temp up to 1112 °F). Multiple sensor mounting styles (Spring-loaded, Welded, Compact, with-indicator) for direct immersion or thermowell pairing. Single or dual 3-wire/4-wire element configurations for redundancy or 4-wire accuracy. Pairs natively with Rosemount 114C / Twisted Square thermowells and 248 / 248R / 644 / 3144P / 3144S / 648 transmitters.
214C Thermocouple Temperature Sensor
Industry-standard thermocouple sensor — the TC sibling of the 214C RTD platform. Same standard ¼-in (6 mm) OD, same mounting styles (Spring-loaded, Welded, Compact, with-indicator), same connection-head options as the RTD variant. Five thermocouple types: E (highest output, non-magnetic), J (most common, iron/constantan, -40 to 1400 °F), K (high-temp, Chromel/Alumel, up to 2192 °F), N (highest thermoelectric stability vs E/J/K/T), T (low-temp, copper/constantan, down to -321 °F). IEC 60584 Class 1 or 2 tolerance, plus ASTM E230 Special and Standard Tolerances. Pairs with Rosemount 114C / Twisted Square thermowells and 248/644/3144P/3144S/648 transmitters.
565 Multiple Spot Temperature Sensor
Multi-spot temperature sensor for ambient-temperature tank gauging — measures liquid temperature at multiple heights with up to 16 Pt-100 spot elements. Hung vertically from the top of the tank, length specified per tank height (2-70 meters / 80-2700 inches). 1-in 316 SST sheath, ANSI or EN flanged tank connections, four-wire / three-wire RTD options. IEC 60751 Class 1/6 B-sp tolerance (Class 1/10 also available with four-wire). Designed for atmospheric tanks up to 0.2 bar (2.9 psi); pressurized tanks require a thermowell. Pairs with the Rosemount 2240S Multi-Input Temperature Transmitter for FOUNDATION Fieldbus / Tankbus output.