Skip to content
(661) 327-8681
Valley Instrument
Rosemount 214C Thermocouple Temperature Sensor
Rosemount

214C Thermocouple Temperature Sensor

SKU: 214C-TC

Built to order. Configure below for an exact part number and quote.

Calibration Available
Nationwide Shipping
Expert Support

Configure Your Rosemount 214C Temperature Sensor (Thermocouple)

Thermocouple variant of the Rosemount 214C platform — Type J, K, T, N, E elements with ranges from -321 to 2192 °F (depends on type). Single or dual element configurations. Same mounting styles and ¼-in (6 mm) sheath as the RTD sibling. Pairs with Rosemount 114C / Twisted Square thermowells and 248 / 644 / 3144P / 3144S transmitters. For applications above 1112 °F where RTDs are unsuitable.

Required Specifications

6 of 6 selected
1
Sensor Type*
TJ
2
Sheath Material*
SS
3
Sensor Accuracy*
ST
4
Number of Elements*
SG
5
Dimension Units*
E
6
Sensor Mounting Style*
SO
Rosemount 214C Temperature Sensor (Thermocouple) Part Number
214CTJSSSTSGE0020SO
Configured list price:from $186.79Excludes sensor type and dimension units, which Emerson prices per configuration. Your Valley sales engineer confirms the adder on the quote.Emerson adds a 4.9% Rosemount surcharge (effective Sep 1, 2026) on the final list price, as a separate line on the order.
Configuration Summary: Rosemount 214C Temperature Sensor (Thermocouple)
Base: $161.59
Sensor Type:
TJType J, -40 to 1400°F (-40 to 760°C)price on request
Sheath Material:
SS316SST sheath
Sensor Accuracy:
STStandard tolerances per ASTM E230
Number of Elements:
SGSingle, grounded
Dimension Units:
EEnglish / USprice on request
Sensor Insertion Length:
00202 inches+$25.20
Sensor Mounting Style:
SOSensor only

Rosemount is configurator-heavy and quote-only. Valley Instrument verifies option compatibility, lead time, and pricing before confirming your order.

Related Products

Rosemount 0085 Pipe Clamp Temperature Sensor # 0085
Rosemount

0085 Pipe Clamp Temperature Sensor

Non-intrusive pipe-clamp temperature sensor — the key piece of Rosemount X-well Technology. Wraps around the outside of a pipe with a thermally-conductive clamp to measure internal process temperature without a thermowell or process penetration. Single-element 4-wire (P1) or dual-element 3-wire (P2) silver-tip RTD, -58 to 572 °F. Pairs factory-assembled with a Rosemount 3144S / 3144P / 648 transmitter and an X-well thermal-conductivity algorithm to back-calculate the internal process temperature. Wide pipe-size selection — DN15 through DN1500 / ½-60 inch — with clamp materials in 316 SST, 304 SST, Super Duplex, and Carbon Steel.

Request Quote →
Rosemount 214A Temperature Sensor (Built-to-Order) # 214A
Rosemount

214A Temperature Sensor (Built-to-Order)

Built-to-Order custom RTD and thermocouple sensor — the flexibility platform of the Rosemount temperature line. Industrial, Cable, Surface, and Bearing sensor designs covering applications where the standardized 214C / 214C-TC / 68Q families don't fit: surface temperature on rotating equipment bearings, cable-style sensors with flying leads or MI sheath, special-purpose mounting (bayonet, screw-in cable, DIN plate). RTD types: thin-film PT100/PT1000 (best for vibration), wire-wound PT100/PT1000 (best for accuracy). TC types: E, J, K, N, T. Multiple sheath materials, diameters, and wire-configuration options (single/dual, 2/3/4-wire RTDs, grounded/ungrounded TCs). Most configurations require a Configuration Data Sheet (CDS) at quote — the encoded options below capture the major decision points; finer details get specified during the quote process.

Request Quote →
Rosemount 214C Temperature Sensor # 214C
Rosemount

214C Temperature Sensor

Industry-standard temperature sensor — RTD (PT100) and thermocouple (J, K, T, N, E) variants for tough process environments. Standard outside diameter ¼-in (6 mm). Two element technologies: wire-wound (best for low-temperature accuracy, -148 to 842 °F) and thin-film (best for vibration/physical shock, high-temp up to 1112 °F). Multiple sensor mounting styles (Spring-loaded, Welded, Compact, with-indicator) for direct immersion or thermowell pairing. Single or dual 3-wire/4-wire element configurations for redundancy or 4-wire accuracy. Pairs natively with Rosemount 114C / Twisted Square thermowells and 248 / 248R / 644 / 3144P / 3144S / 648 transmitters.

Request Quote →
Rosemount 565 Multiple Spot Temperature Sensor # 0565
Rosemount

565 Multiple Spot Temperature Sensor

Multi-spot temperature sensor for ambient-temperature tank gauging — measures liquid temperature at multiple heights with up to 16 Pt-100 spot elements. Hung vertically from the top of the tank, length specified per tank height (2-70 meters / 80-2700 inches). 1-in 316 SST sheath, ANSI or EN flanged tank connections, four-wire / three-wire RTD options. IEC 60751 Class 1/6 B-sp tolerance (Class 1/10 also available with four-wire). Designed for atmospheric tanks up to 0.2 bar (2.9 psi); pressurized tanks require a thermowell. Pairs with the Rosemount 2240S Multi-Input Temperature Transmitter for FOUNDATION Fieldbus / Tankbus output.

Request Quote →