Skip to content
(661) 327-8681
Valley Instrument
Rosemount 565 Multiple Spot Temperature Sensor
Rosemount

565 Multiple Spot Temperature Sensor

SKU: 565

Built to order. Configure below for an exact part number and quote.

Calibration Available
Nationwide Shipping
Expert Support

Configure Your Rosemount 565 Multiple Spot Temperature Sensor

Multi-spot temperature sensor for ambient-temperature tank gauging — measures liquid temperature at multiple heights with up to 16 Pt-100 spot elements. Hung vertically from the top of the tank, length specified per tank height (2-70 meters / 80-2700 inches). 1-in 316 SST sheath, ANSI or EN flanged tank connections, four-wire / three-wire RTD options. IEC 60751 Class 1/6 B-sp tolerance (Class 1/10 also available with four-wire). Designed for atmospheric tanks up to 0.2 bar (2.9 psi); pressurized tanks require a thermowell. Pairs with the Rosemount 2240S Multi-Input Temperature Transmitter for FOUNDATION Fieldbus / Tankbus output.

Required Specifications

9 of 9 selected
1
Overall Length (Lo)*

The tank-spanning length of the sensor. Metric range 2000-70000 mm (2-70 m) in 10 mm steps. US range 80-2700 in (≈6.7-225 ft) in 1 in steps. Custom length specified at quote.

M25000
2
Sheath Type*
A
3
Tank Connection*

ANSI raised-face flanges (A-L), EN flat-face flanges (1-7), or M33×1.5 threaded (code 0). All flanges in SST AISI 316.

0
4
Temperature Sensor Wiring*
4
5
Number of Temperature Spot Elements*

1-16 spot elements distributed along the sensor length. Tank-gauging applications typically use 6-16 elements for full vertical profile.

16
6
Element Type*
P
7
Thermometer Tolerance Class*

IEC 60751 spec. Class 1/10 (code 2) requires four-wire sensor wiring.

2
8
Thermometer Temperature Range*
2
9
Lead Wires*

Standard integrated installation with Rosemount 2240S transmitter is code 00. Specify a length code for remote-mount installations: 04-10 in meters, 13-33 in feet.

00
Rosemount 565 Multiple Spot Temperature Sensor Part Number
0565M25000A0416P2200
Pricing:Contact Valley Instrument for a quote on this configuration
Configuration Summary: Rosemount 565 Multiple Spot Temperature Sensor
Overall Length (Lo):
M25000M25000 — 25 m (25000 mm) — common large-tankprice on request
Sheath Type:
AA — 1-in AISI 316 SST (only option)price on request
Tank Connection:
00 — M33×1.5 threaded (smaller tanks)price on request
Temperature Sensor Wiring:
44 — Four-wire (recommended, required for 1/10 tolerance class)price on request
Number of Temperature Spot Elements:
1616 — 16 elements (full vertical profile, large tanks)price on request
Element Type:
PP — Pt-100 (platinum RTD)price on request
Thermometer Tolerance Class:
22 — 1/10 B-sp (requires four-wire)price on request
Thermometer Temperature Range:
22 — -20 to +250 °C (-4 to +482 °F) — high-temperatureprice on request
Lead Wires:
0000 — Integrated installation with Rosemount 2240S (standard)price on request

Rosemount is configurator-heavy and quote-only. Valley Instrument verifies option compatibility, lead time, and pricing before confirming your order.

Related Products

Rosemount 0085 Pipe Clamp Temperature Sensor # 0085
Rosemount

0085 Pipe Clamp Temperature Sensor

Non-intrusive pipe-clamp temperature sensor — the key piece of Rosemount X-well Technology. Wraps around the outside of a pipe with a thermally-conductive clamp to measure internal process temperature without a thermowell or process penetration. Single-element 4-wire (P1) or dual-element 3-wire (P2) silver-tip RTD, -58 to 572 °F. Pairs factory-assembled with a Rosemount 3144S / 3144P / 648 transmitter and an X-well thermal-conductivity algorithm to back-calculate the internal process temperature. Wide pipe-size selection — DN15 through DN1500 / ½-60 inch — with clamp materials in 316 SST, 304 SST, Super Duplex, and Carbon Steel.

Request Quote →
Rosemount 214A Temperature Sensor (Built-to-Order) # 214A
Rosemount

214A Temperature Sensor (Built-to-Order)

Built-to-Order custom RTD and thermocouple sensor — the flexibility platform of the Rosemount temperature line. Industrial, Cable, Surface, and Bearing sensor designs covering applications where the standardized 214C / 214C-TC / 68Q families don't fit: surface temperature on rotating equipment bearings, cable-style sensors with flying leads or MI sheath, special-purpose mounting (bayonet, screw-in cable, DIN plate). RTD types: thin-film PT100/PT1000 (best for vibration), wire-wound PT100/PT1000 (best for accuracy). TC types: E, J, K, N, T. Multiple sheath materials, diameters, and wire-configuration options (single/dual, 2/3/4-wire RTDs, grounded/ungrounded TCs). Most configurations require a Configuration Data Sheet (CDS) at quote — the encoded options below capture the major decision points; finer details get specified during the quote process.

Request Quote →
Rosemount 214C Temperature Sensor # 214C
Rosemount

214C Temperature Sensor

Industry-standard temperature sensor — RTD (PT100) and thermocouple (J, K, T, N, E) variants for tough process environments. Standard outside diameter ¼-in (6 mm). Two element technologies: wire-wound (best for low-temperature accuracy, -148 to 842 °F) and thin-film (best for vibration/physical shock, high-temp up to 1112 °F). Multiple sensor mounting styles (Spring-loaded, Welded, Compact, with-indicator) for direct immersion or thermowell pairing. Single or dual 3-wire/4-wire element configurations for redundancy or 4-wire accuracy. Pairs natively with Rosemount 114C / Twisted Square thermowells and 248 / 248R / 644 / 3144P / 3144S / 648 transmitters.

Request Quote →
Rosemount 214C Thermocouple Temperature Sensor # 214C-TC
Rosemount

214C Thermocouple Temperature Sensor

Industry-standard thermocouple sensor — the TC sibling of the 214C RTD platform. Same standard ¼-in (6 mm) OD, same mounting styles (Spring-loaded, Welded, Compact, with-indicator), same connection-head options as the RTD variant. Five thermocouple types: E (highest output, non-magnetic), J (most common, iron/constantan, -40 to 1400 °F), K (high-temp, Chromel/Alumel, up to 2192 °F), N (highest thermoelectric stability vs E/J/K/T), T (low-temp, copper/constantan, down to -321 °F). IEC 60584 Class 1 or 2 tolerance, plus ASTM E230 Special and Standard Tolerances. Pairs with Rosemount 114C / Twisted Square thermowells and 248/644/3144P/3144S/648 transmitters.

Request Quote →