Family Owned & Operated Since 1971• Bakersfield, CA
Controllers, transmitters, signal conditioners, HART communicators, and PLCs
10434 products
Portable battery-powered HART field communicator (HART 5/6) for configuring Aplisens smart pressure, differential pressure, and temperature transmitters and level probes via the 4-20 mA loop.
Universal-input panel indicator with four relay outputs, 20 mm red LED display, RS485 digital output, and integrated 24 VDC transmitter supply.
Full HART communicator: docking station with universal power adapters, HART lead kit, 250-ohm resistor, rechargeable battery, USB cable, SD card, soft carry case, hand strap.
Smart System intelligent digital indicator, single input. Configured to order — base list price shown.
iOS HART Communicator Bundle, Bluetooth LE
Isolated RS232 HART Modem
mobiLink Modem for Foundation Fieldbus and HART
mobiLink Modem for HART
mobiLink Modem for Foundation Fieldbus, Profibus Pa, and HART
mobiLink Modem for Profibus Pa and HART
App-based bearing diagnostics kit with wireless triaxial piezoelectric sensor giving instantaneous color-coded feedback on bearing health, misalignment, and unbalance.
Laser belt alignment tool that mounts in the pulley groove itself, correcting angular, parallel, and sheave misalignment to extend belt life and reduce vibration.
Deployable wireless triaxial sensor system for remote and hazardous assets: 2,000 ft gateway range, 100+ sensors per gateway, 5-year battery, Class 1 Div 1 intrinsically safe.
Handheld vibration analysis system with wireless triaxial sensor, route-based data collection, balancing, and Accurex AI automatic diagnosis, integrated with NEST i4.0 software.
Smartphone and tablet-based machine diagnostics kit with wireless triaxial sensor and Accurex AI, giving instant color-coded alerts for bearing health, misalignment, and unbalance.
Real-time online condition monitoring system with 8, 12, 16, or 32 synchronous channels, Accurex AI diagnostics, and Modbus or OPC/UA plant communication.
Compact wireless vibration sensor for balance-of-plant machinery, with high-frequency fault detection, rugged sealed construction, and NEST i4.0 integration for analysis and trending.
Wireless two-plane synchronous balancing solution for rigid rotors, with 6-channel wireless sensors, laser tachometer, 0.5 degree accuracy at 3000 RPM, and guided GuideU workflow.
Complete liquid-level measurement system — a 316 stainless steel snubnose AMETEK submersible transmitter paired with a fully calibrated, microprocessor-based meter/controller in a NEMA 4X housing, plus factory-installed waterproof cable. Choose the sensor model (575, 575 PB, 675 PB, 375, SST, or SDT), meter output (two or four relays, optional 4–20 mA), and lightning protection. The specific sensor range is included at no charge and cable length is quoted separately. Configure sensor, output, and lightning protection.
AMETEK’s Model 40 is a fully pneumatic indicating pressure controller, transmitter, and pilot positioner for control loops in refineries, chemical plants, and other process or hazardous areas where no electrical power is available. Built to specification: control mode (100% / 200% proportional, proportional + reset, 300% PID, or 75% pilot positioner); output (3–15, 3–27, 6–30, or 12–60 PSI); instrument type (controller, control with 2-position bypass, transmitter, or pilot positioner); sensing element (Bourdon tube, metal or slack diaphragm, Barton 199/224 DP cell, or indicating level); element material (bronze, 316 stainless steel, Ni-Span C, or Buna-N); pressure range to 3000 PSI; engineering units; and options such as external set point, air filter regulator, shatterproof glass, vented case, special calibration, and mounting brackets. Because each Model 40 is assembled to order from calibrated modules and elements, pricing is by quotation — contact us with your control requirements and we will configure and quote your unit.
All-welded 316 stainless steel fixed-range pressure transmitter — durable, accurate, and cost-effective for tough environmental and corrosive-media service. 4–20 mA (or low-power 1–5 VDC) output, ±0.3% full scale (±0.5% on the differential version). Gauge, absolute, compound, vacuum, or differential, from 6 PSI to 5000 PSI (6–500 psid differential). Weatherproof against direct spray to 200 PSI. Configure connection, type, range, output, fill, and cable to build your part number.
FM and CSA explosion-proof and intrinsically safe pressure transmitter with a bench-adjustable 5:1 zero/span turndown and a double-O-ring, clean-in-place weatherproof design. 4–20 mA output, ±0.25% of calibrated span, 316 stainless steel construction (Hastelloy C flush diaphragm for viscous or solids-bearing media), NACE-compliant. Ranges 3 PSI to 5000 PSI. Used in refineries, pipelines, petrochemical plants, pulp & paper, and water/wastewater. Configure connection, type, range, output, diaphragm, fill, approval, and coupling.
Welded 316 stainless steel hazardous-location pressure transmitter with a 4–20 mA output and ±0.25% of calibrated span accuracy (linearity, hysteresis, repeatability). FM and CSA explosion-proof and intrinsically safe, NACE-compliant, with a 5:1 field-adjustable zero/span turndown. Calibrated range bands from 3 PSI to 5000 PSI. Configure range band, wetted material, and output to build your part number.
Flush-mount hazardous-location pressure transmitter — the diaphragm sits flush with the process connection to prevent particulate buildup, making it suited to viscous or solids-bearing media. 316 stainless steel housing with a Hastelloy C diaphragm, 4–20 mA output, ±0.25% of calibrated span. FM and CSA explosion-proof and intrinsically safe. Calibrated range bands from 3 PSI to 300 PSI. Configure range, fill material, agency approval, and coupling.