Family Owned & Operated Since 1971• Bakersfield, CA
Power quality analyzers, battery testers, megohmmeters, and ground resistance testers
500 products
The Fluke FLK-IRR1-SOL Solar Irradiance Kit comes with a meter, temperature probe and soft carrying case.
Fluke PV Module Lift ladder-mounted pulley system. Raises solar PV modules safely from ground level to rooftop without manual carry — one person operates the system from the ladder while modules travel vertically alongside the rungs. Reduces drops, panel damage, and installer fatigue on residential and light-commercial solar installs. This variant ships with a 80 ft rope — suited to taller residential or light-commercial roofs.
Fluke PV Module Lift ladder-mounted pulley system. Raises solar PV modules safely from ground level to rooftop without manual carry — one person operates the system from the ladder while modules travel vertically alongside the rungs. Reduces drops, panel damage, and installer fatigue on residential and light-commercial solar installs. This variant ships with a 60 ft rope — suited to typical residential roofs.
Magnet Probe 1, 3RED/1BLACK Magnet Probes for 4 mm Banana
Magnetic probe tips for voltage test leads with 4 mm banana connectors.
At-a-glance power quality health for faster troubleshooting. Capture high-speed transients up to 8 kV. Easily view V/A/Hz, power, dips, swells, and harmonics data.
Selective and stakeless clamp set for the Fluke 1623 GEO Earth Ground Tester. Includes EI-162X sensing clamp and EI-162AC inducing clamp for measuring individual ground rod resistance in multi-grounded systems without disconnecting.
The TLPV-UTOOL enables quick disconnection of solar PV connectors, compatible with Fluke TLPV1 and TLPV2 leads. Ideal for efficient installations.
MC4 to 4 mm Test Lead Set, Black/Red
The TLPV2 Solar Clamp Test Lead Set ensures accurate, safe DC power measurements on PV systems, featuring reliable Staubli MC4 connectors for easy troubleshooting.
Test Probe with Remote Test Button, Gray, Smft PV
Fluke TruTest Software License Code - Advanced
Fluke TruTest Software License Code - Lite
The Fluke U1500S 1,500V DC Voltage Sensor allows you to safely connect to DC bus bars at up to 1.5kV, connects to the instrument voltage input.The voltage can be scaled in the instrument to provide results in real units.
USB-TO-SERIAL-RS-232 Interface Adapter Cable
Wi-Fi/BLE Module for FLUKE-177X Analyzers
1015 611 - BITE5 Backpack for BITE5 and Accessories
Replacement dual-channel test lead set required for dual-channel measurement on the Megger MTO106 transformer ohmmeter. Sold separately when the MTO106 is purchased as the bare instrument (BN-19000) without bundled leads.
Protective ground (earth) cable for the Megger MOM3 — 5 m (16 ft), yellow/green insulation per IEC standard ground-conductor coloring. Mixed terminations: a clamp on one end and a lug on the other for connecting between the MOM3's ground terminal and the test object's earth reference. Required for accurate four-terminal Kelvin measurements.
For ease of monitoring single-phase loads. Adapter is plugged into standard grounded 120 V outlet, unit under test is plugged into Adapter. Voltage and current sense outputs plug directly into PowerSight.
Plugs into standard North American 60Hz outlet to supply 12VDC @ 500ma. For all meters except PowerSight PS3000.
Plugs into standard European 50Hz outlet to supply 12VDC @ 500ma. For all meters except PowerSight PS3000.
Converts any line power of 120 to 600V to +12VDC @ 500ma with barrel plug output to power PowerSight from voltage under test. Combines with battery backup to ensure self-power for months at a time. Includes fused voltage probes.
Bluetooth USB adapter with software for wireless communications with PowerSight analyzers.