
Improve safety & efficiency with Fluke 3000 FC series wireless multimeter. Get true-RMS voltage, current measurements frequency, diode measurements & more!
Key Features
- Full featured multimeter that also reads results wirelessly from remote Fluke Connect wireless modules
- Measures AC and DC voltage to 1000 V, AC and DC current, and temperature
- Shows up to four readings simultaneously on a bright white backlit display
- Sends measurement data to your smartphone
- Safety rated CAT III 1000 V, Cat IV 600 V; IP54
The Fluke 3000FC HVAC Wireless HVAC System FC # FLK-3000FC HVAC is manufactured by Fluke. Valley Instrument Service is an authorized Fluke dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| 45 Hz to 500 Hz | 1.0% + 3 |
| 500 Hz to 1 kHz | 2.0% + 3 |
| Accuracy2 3 4 | DC Voltage, Continuity, Resistance, Diode Test and Capacitance |
| Range / resolution | 600.0 mV / 0.1 mV |
| Accuracy | 0.09% + 2 |
| µF | 1. In the 9999 μF range for measurements to 1000 μF, the measurement accuracy is 1.2% + 2. |
| Range1 / resolution | 60.00 mA / 0.01 mA400.0 mA3 / 0.1 mA |
| mA DC2 | 1. All AC current ranges are specified from 5% of range to 100% of range.2. Input burden voltage (typical): 400 mA input 2 mV/mA.3. 400.0 mA accuracy specified up to 600 mA overload. |
| Accuracy1 | 0.1% + 1 |
| Overload protection | 1100 V RMS |
| Input impedance (nominal) | > 10 MΩ < 100 pF |
| Common mode rejection ratio(1 kΩ unbalance) | > 120 dB at DC, 50 Hz or 60 Hz |
| Normal mode rejection | > 60 dB at 50 Hz or 60 Hz |
| General | Open Circuit Test Voltage |
| Full scale voltage to 6 MΩFull scale voltage 50 MΩ | < 0.9 V DC |
| Typical short circuit current | < 350 mA |
| Overload | 600 mA overload for 2 minutes maximum, 10 minutes rest minimum |
| DC functions | ± 12 counts for changes > 350 mS in duration. |
| AC functions | ± 40 counts for changes > 900 mS in duration. |
| Maximum voltage between any terminal and earth ground | 1000 V DC or AC RMS |
| Ω fuse protection from A inputs | 0.44 A (44/100 A, 440 mA), 1000 V FAST Fuse, Fluke specified part only |
| Update rate | 4/sec |
| Volts, amps, ohms | 6000 counts |
| Frequency | 10,000 counts |
| Capacitance | 1,000 counts |
| Battery type | Three AA Alkaline batteries, NEDA 15A IEC LR6 |
| Battery life | 250 hours minimum |
| RF communications | 2.4 GHZ ISM Band |
| Open air, unobstructed | Up to 20m |
| Obstructed, sheetrock wall | Up to 6.5m |
| Obstructed, concrete wall, or steel electrical enclosure | Up to 3.5m |
| Operating | -10°C to 50°C |
| Storage | -40°C to 60°C |
| Temperature coefficient | 0.1 X (specified accuracy) / °C ( 28°C) |
| Relative humidity | 0% to 90% (0°C to 35°C)0% to 75% (35°C to 40°C)0% to 45% (40°C to 50°C) |
| Electromagnetic compatibilityEMI, RFI, EMC, RF | EN 61326–1:2006, EN 61326–2–2:2006ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489V1.8.1:2008FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249FCCID : FCC: T68–FDMMBLE IC: 6627A–FDMMBLE |
| Safety compliance | ANSI / ISA 61010–1 / (82.02.01): 3rd editionCAN / CSA-C22.2 No 61010-1-12: 3rd editionUL 61010–1: 3rd editionIEC / EN 61010–1:2010 |
| Certifications | CSA, FCC, CE |
| Ingress Protection (IP) rating | IP54 |
| Pollution Degree | 2 |
| Size (H x W x L) | 4.75 x 9.3 x 20.7 cm (1.87 x 3.68 x 8.14 in) |
| Weight | 340 g (12 oz) |
| Warranty | Three years |
| Altitude | Not compatible with Fluke CNX test tools |
This product is part of a family with 9 models. Select a model below to view details.
| Model | Price | |
|---|---|---|
FLK-3000FC/PRV240 | $589.99 | View Details → |
FLK-3000FC GM | $1,259.99 | View Details → |
FLK-3000FC HVACCurrent | $926.99 | Viewing |
FLK-3000FC IND | $1,628.99 | View Details → |
FLK-3000FC | $449.99 | View Details → |
FLK-3000FC/TPAK | $589.99 | View Details → |
FLK-3000FC/1AC-II | $459.99 | View Details → |
FLK-3000FC/AUTO | $1,011.99 | View Details → |
FLK-3000FC/EDA2 | $487.99 | View Details → |
Related Products

789 and 773 Bundle Package
Fluke 789 ProcessMeter is wireless via Fluke Connect & combines a DMM & loop calibrator. Large, bright dual display. Get specs and buy official Fluke here.

107 CAT III 600V DMM ESP
Enhance your toolset with the BK120 breaker finder and 107 digital multimeter (DMM). The perfect pair for circuit identification and electrical measurements.

107 DMM and BK120 Breaker Finder Bundle
The Fluke BK120 circuit breaker finder tool simplifies electrical troubleshooting. Identify circuits to save time and enhance safety at home or work.

113 Utility Multimeter
The Fluke 113 is an easy-to-use basic multimeter with VCHEK LoZlow impedance measurement function for ghost voltage detection which can measure and display both AC and DC voltages.

