805/ES External Vibration Sensor
SKU: FLUKE-805/ES
Understand equipment conditions with vibration analysis using Fluke's handheld vibration testers & systems for troubleshooting & diagnosing mechanical problems.
List price. Volume pricing available.
Understand equipment conditions with vibration analysis using Fluke's handheld vibration testers & systems for troubleshooting & diagnosing mechanical problems.
Key Features
- Reliable, repeatable, accurate device for checking bearings and overall vibration
- Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
- Provides consistent data quality at both low and high frequency ranges
- Offers four-level severity scale to assess urgency of problems and bearing condition
The Fluke 805/ES External Vibration Sensor # FLUKE-805/ES is manufactured by Fluke. Valley Instrument Service is an authorized Fluke dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| General | Vibration Meter |
| Low frequency range (overall measurement) | 10 Hz to 1,000 Hz |
| High frequency range (CF+ measurement) | 4,000 Hz to 20,000 Hz |
| Severity levels | Good, satisfactory, unsatisfactory, unacceptable |
| Vibration limit | 50 g peak (100 g peak-peak) |
| A/D converter | 16-bit |
| Signal to noise ratio | 80 dB |
| Low frequency | 20,000 Hz |
| High frequency | 80,000 Hz |
| Real time clock backup | Coin battery |
| Sensitivity | 100 mV g ±10% |
| Measurement range | 0.01 g to 50 g |
| High frequency range | 4,000 Hz to 20,000 Hz |
| Resolution | 0.01 g |
| Accuracy | At 100 Hz ±5% of measured value |
| Sampling rate | Amplitude Units |
| Acceleration | g, m/sec² |
| Velocity | in/sec, mm/sec |
| Displacement | mils, mm |
| Range | -20°C to 200°C (-4°F to 392°F) |
| Focal length | Fixed, at ~3.8 cm (1.5 in) |
| Frequency range | 10 Hz to 1,000 Hz |
| Bias voltage (to supply power) | 20 VDC to 22 VDC |
| Bias current (to supply power) | Maximum 5 mA |
| External interfaces | USB 2.0 (full speed) communication |
| Data capacity | Database on internal flash memory |
| Upgrade | Through USB |
| Memory | Up to 3,500 measurements |
| Electrostatic discharge: burst | Standard EN 61000-4-2 |
| Electromagnetic interference | Standard EN 61000-4-3 |
| RE | Standard CISPR 11, Class A |
| Operating temperature | -20°C to 50°C (-4°F to 122°F) |
| Storage temperature | -30°C to 80°C (-22°F to 176°F) |
| Operating humidity | 10% to 95% RH (non-condensing) |
| Operating/storage altitude | Sea level to 3,048 meters (10,000 feet) |
| IP rating | IP54 |
| Drop test | 1 meter |
| Battery type | AA (2) Lithium Iron Disulfide |
| Battery life | 250 measurements |
| Size (L x W x H) | 24.1 x 7.1 x 5.8 cm (9.5 x 2.8 x 2.3 in) |
| Weight | 0.40 kg (0.89 lb) |
| Connectors | USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector) |
This product is part of a family with 2 models. Select a model below to view details.
| Model | Price | |
|---|---|---|
FLUKE-805 FC | $3,066.84 | View Details → |
FLUKE-805/ESCurrent | $2,015.99 | Viewing |
Related Products
810 Vibration Tester
Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.
810QDC Quick Disconnect Cable
Quick Disconnect Cable
810S Sensor
Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.
810SMM Sensor Magnet Mount
Fluke 810s are handheld vibration analyzers & testers that help identify and prioritize mechanical problems to help make informed maintenance decisions.