Family Owned & Operated Since 1971• Bakersfield, CA
Pressure, temperature, electrical, and multifunction calibrators
52455 products
Bench-top hydraulic pressure comparator for routine comparison calibrations against a reference standard. Built-in hand-pump and four Monel-internal test gauges in a single unit. ±0.250% F.S. standard accuracy (to 5,000 PSI / 350 bar); ±0.500% F.S. on the 10,000 PSI / 700 bar models. Available with imperial PSI or metric (kg/cm² / kPa / bar) gauges. Configure unit system, NIST traceable certification, pressure medium, and o-ring material to build your part number.
Imperial dual-column, dual piston/cylinder hydraulic deadweight tester. Side-by-side columns enable comparative calibrations and differential measurements; each model ships with both a low-range and a high-range piston up to 15,000 PSI. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Top-of-line imperial Type T hydraulic deadweight tester at ±0.015% reading accuracy. Dual-column configuration with two interchangeable pistons (low + high range) and a dedicated weight set per piston, so high-range and low-range work proceed without reconfiguration. NIST traceable, local gravity correction + calibration data included. Configure pressure range, pressure medium, and o-ring material to build your part number.
Imperial single-column, dual piston/cylinder hydraulic deadweight tester for pressure calibration up to 15,000 PSI. Each model ships with two interchangeable pistons — a low-range piston for fine resolution and a high-range piston for top-pressure work. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Imperial single-column, single-piston/cylinder hydraulic deadweight tester for pressure calibration up to 15,000 PSI. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Imperial single-column, single-piston/cylinder hydraulic deadweight tester at ±0.015% reading accuracy — the highest accuracy class in the M&G imperial Type T DWT line. NIST traceable, local gravity correction + calibration data included. Available in five pressure ranges from 500 PSI to 15,000 PSI. Configure pressure range, pressure medium, and o-ring material to build your part number.
Metric dual-column, dual piston/cylinder hydraulic deadweight tester. Side-by-side columns enable comparative calibrations and differential measurements. ±0.100% standard accuracy (±0.025% optional via calibration upgrade). NIST traceable. 9 range models across kg/cm², bar, and kPa unit systems. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Top-of-line metric Type T hydraulic deadweight tester at ±0.015% reading accuracy. Dual-column configuration with two interchangeable pistons (low + high range) and a dedicated weight set per piston so high-range and low-range work proceed without reconfiguration. NIST traceable, local gravity correction + calibration data included. Configure pressure range, pressure medium, and o-ring material to build your part number.
Metric single-column, dual piston/cylinder hydraulic deadweight tester. ±0.100% standard accuracy (±0.025% optional via calibration upgrade). Each model ships with two interchangeable pistons — a low-range and a high-range — so one tester covers a wide pressure span. NIST traceable. 9 range models across kg/cm², bar, and kPa unit systems. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Metric single-column, single-piston/cylinder hydraulic deadweight tester at ±0.025% reading accuracy (standard). NIST traceable with full calibration data included in the base price. 20 range models across kg/cm², bar, and kPa unit systems, spanning 1 to 100,000 kPa (or equivalent in other units). Configure pressure range, gravity correction, pressure medium, and o-ring material to build your part number.
Metric single-column, single-piston/cylinder hydraulic deadweight tester at ±0.015% reading accuracy — highest accuracy class in the metric Type T DWT line. NIST traceable, local gravity correction + calibration data included. 18 range models (6 ranges × 3 unit systems: kg/cm², bar, kPa). Configure pressure range, pressure medium, and o-ring material to build your part number.
GaugeCalHP NPT Fitting Kit for Pressure Calibration
The PRC10 enables plant maintenance and electrical technicians to test and calibrate a wide variety of process control equipment, including transmitters, transducers, indicators, sensors, instrumentation, robotic systems, thermocouples, and other industrial system components. Includes test leads, alligator clips, 100V-240V AC universal adaptor with 4 plugs, six AA batteries, and hard carrying case.
The Fluke 154 HART Communicator is a standalone tablet based tool that wirelessly connects to the HART transmitter. See the specs or talk with an engineer.
The Fluke 700HTH-1 hydraulic test hose is a 10,000 psi, 690 bar working pressure test hose that features stainless steel and nylon construction for use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test.
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.
Low-Pressure Test Pump, 100 PSI/7 Bar
Fluke 700M20TH premium pressure transmitter test hose with M20 × 1.5 metric connections. Stainless-steel braided hose, female M20 fittings on both ends, rated to 5,000 psi / 345 bar. Used to connect Fluke 700-series pressure calibrators to transmitters or pumps ported for the M20 × 1.5 standard common in European process installations.
Fluke 700MTH premium pressure transmitter test hose for metric connections. Stainless-steel braided construction with 1/4" female BSP fittings on both ends, rated to 5,000 psi / 345 bar. Use with Fluke 700-series pressure calibrators when the transmitter or pump under test has metric BSP threads instead of NPT.
The Fluke 700PCK makes it possible to calibrate your pressure modules at your facility using your own precision pressure standards.
Pneumatic Test Pump. -13 to 600 PSI
Fluke 700TTH-10K premium pressure transmitter test hose. Stainless-steel braided hose with 1/8" NPT female fittings on both ends, rated to 10,000 psi / 690 bar working pressure — the 10K counterpart to the 700TTH-5K. Intended for high-pressure calibration work with the Fluke 700HTP-2 hand pump or equivalent, connecting the calibrator to a pressure transmitter or device under test.
Fluke 700TTH-5K premium pressure transmitter test hose. Stainless-steel braided hose with 1/8" NPT female fittings on both ends, rated to 5,000 psi / 345 bar working pressure. Connects Fluke 700G, 718/719, 721, 729, or 750-series pressure calibrators to a pressure transmitter or pump during field calibration.
The Fluke 705 Loop Calibrator is a cost-effective, integrated solution for calibration, repair, & maintenance of milliamp loops. Get specs & details here.