Calibration

Hydraulic Test Pump, 140 MPa (20K PSI)

Hydraulic Test Pump, 140 MPa (20K PSI)

Ralston Pneumatic Pressure Regulator (3000 PSI / 210 Bar) Output, 1/4" FNPT Ports

Pneumatic Pressure Regulator (3000 PSI / 210 Bar) Output, 1/4" FNPT Ports

ADT901B, Pneumatic Pressure Test Generator, -6 to 6 PSI (-0.4 to 0.4 Bar), 1/4" BSP F

ADT912A, Low Pressure Test Generator, -14 to 60 PSI (-0.95 to 4 Bar), 1/4BSP F

ADT927, Hydr. Pressure Generator, -860 mbar to +700 Bar (-12.5 PSI to 10,000 PSI), 1/4" BSP

ADT927W, Hydraulic Pressure Test Pump, for Use with Water, to +700 Bar (10,000 PSI), 1/4" BSP

Thermometer, Handheld, 2-Channel Data Logger

Thermometer, Handheld, 2-Channel Data Logger

Teflon-Sheathed Thermistor, Bare Wire

Teflon-Sheathed Thermistor, Bare Wire termination

789 Processmeter

Fluke 789 ProcessMeter is wireless via Fluke Connect & combines a DMM & loop calibrator. Large, bright dual display. Get specs and buy official Fluke here. Built-in selectable 250 ohm HART resistor for communicating with HART devices.

Field Dry-Well, -25 to 140°C, Insert A, 115V

Field Dry-Well, -25 to 140°C, Insert A, miscellaneous (cold side), 115 V

Field Dry-Well, -25 to 140°C, Insert A, 115V

Field Dry-Well, -25 to 140°C, Insert A, 115 V

Furnace, 1200C TC w/3150-2, 110V 50/60 Hz

Furnace, 1200C TC w/3150-2, 110V 50/60HZ

Water Deadweight Tester, 35 Bar

Water Deadweight Tester, 35 Bar

Pneumatic Test Pump, Vacuum to 20 MPa (3000 PSI)

Pneumatic Test Pump, Vacuum to 20 MPa (3000 PSI)

ETC-125 Easy Temperature Calibrator, 25°C to 125°C

ETC-125 Easy Temperature Calibrator, 25°C to 125°C

RTC-158 Reference Temperature Calibrator, -45°C to 155°C

RTC-158 Reference Temperature Calibrator, -45°C to 155°C

PM-50 Wireless Diagnostic Pressure Module, 0-30 PSI

Ultra-compact Bluetooth-enabled diagnostic pressure module for the PIE 901 calibrator. Also connects by wired cable to the PIE 820Elite, 830, and 850. Isolated 316L stainless steel sensor with ±0.035% of span accuracy. 0–30 PSI (0–2.1 bar) range.

Cal Kit, GX-3R or GX-3R Pro, 34AL Cylinder H2S 25 PPM / CO 50 PPM / CH4 50% LEL / O2 12% in N2, Regulator 0.25 LPM, Case & Tubing

Cal Kit, GX-3R or GX-3R Pro, 34AL Cylinder H2S 25 PPM / CO 50 PPM / CH4 50% LEL / O2 12% in N2, Regulator 0.25 LPM, Case & Tubing

ADT783, Pressure Controller -14.5 to 1000 PSI (-0.95 to 70 Bar), Pressure Modules Not Included

ADT835, Portable Calibration Bath, -30 °C to 150 °C, 110V

ADT835PC, Portable Calibration Bath, -30 °C to 150 °C, 220V, with Process Calibrator Option

T-810 Pneumatic Hand Pump, 0-200 PSI (14 bar), Imperial Fittings

Pneumatic hand pump for calibration to 200 PSI (14 bar) with imperial fittings.

T-960 Pneumatic Hand Pump, 0-30 PSI (2 bar)

Scissor-action pneumatic hand pump for calibration to 30 PSI (2 bar).

Crystal APMi Advanced Pressure Module, IS, 10,000 PSI

APMi intrinsically safe advanced pressure module, 10,000 PSI, for use with HPC50 and nVision