Calibration

750P29EX Pressure Module, 0 to 3000 (0 to 200 Bar), (0 to 20 MPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P3IN Pressure Module, 0 to 3 Inch H2O (0 to 7.5 mbar)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P5IN Pressure Module, 0 to 5 Inch H2O (0 to 12.5 mbar)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750PA4EX Pressure Module, 0 to 15 (0 to 1 Bar), (0 to 100 kPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

RTD Probe for 721 and 719PRO

RTD Probe for 721 and 719Pro

TRS1+ Calibration Standard

TRS1+ Calibration Standard

Union Body, 15/16-20 UNEF Male x 1/4" NPT Female

Union body, 15/16-20 UNEF male to 1/4" NPT female, for Type T deadweight tester test connections.

ADT151, Pressure Module for ADT7XX Controller, 0.01%FS Accuracy with Dual-Range Calibration, Range 1: -15 to 100 PSI (-1 to 7 Bar), Range 2: -15 to 50 PSI (-1 to 3.5 Bar)

4 inH2O to PSI Conversion Ring for PK II DWT (Small)

Conversion ring for PK II pneumatic deadweight tester — converts 4 inH2O range to PSI. Small weight-carrier interface.

T-656 Pump Rebuild Kit for T-620 / T-620H

Pump rebuild kit for T-620 and T-620H hydraulic hand pumps.

PK II Individual Weight, 0.1 PSI, Aluminum

Individual weight for the PK II pneumatic deadweight tester, providing a 0.1 PSI pressure increment; aluminum construction.

ADT155, Pressure Module, -10 to 10 PSI (-0.7 to 0.7 Bar), 0.01%FS Accuracy

Individual Weight for Type T DWT, 0.5 lb, Alloy

Individual 0.5 lb weight for Type T hydraulic deadweight tester. Produces 5 PSI on WG-89 (0.10 in²), 10 PSI on WG-90 (0.05 in²), 25 PSI on WG-91 (0.02 in²), 50 PSI on WG-92 (0.01 in²) piston/cylinder assemblies. Alloy construction.

Weight Set for PK II DWT, 1 to 20 PSI, Stainless Steel

Stainless steel weight set for PK II pneumatic deadweight tester, 1 to 20 PSI range. Contains 2× 1 PSI, 1× 2 PSI, 3× 5 PSI weights. Pairs with the PK2-20-SS range model. NIST traceable with standard or local gravity calibration.

Type T Comparator Test Gauge, 0 to 30 PSI, Monel Internals, 9/16-18 Lower Mount

0 to 30 PSI range, Monel internals, 9/16-18 lower mount, ±0.250% F.S. accuracy (standard). Replacement/additional bare gauge for Type T hydraulic comparator — no fitting or o-rings.

Carrying Case for Type T/R Pump and Tools

Carrying case for Type T and Type R hydraulic deadweight tester pump and tools.

ADT100, Hydraulic Filter, 10K PSI (700 Bar), 1/4BSP M to 1/4BSP F

Union Body, 15/16-20 UNF Male x 9/16-18 UNF Female for 1424 Gauges

Union body, 15/16-20 UNF male to 9/16-18 UNF female, for connecting Type T comparator pumps to 1424-style test gauges.

Calibration Adapter for -01 Series & GasWatch 2

Calibration Adapter for -01 Series & GasWatch 2

Calibration Service - Custom Calibration Point Between 300 °F to 572 °F.

Calibration Service - Custom Calibration Point Between 300 °F to 572 °F.

Piston/Cylinder Assembly for Type T DWT, 0.10 in²

0.10 in² piston/cylinder assembly for the Type T hydraulic deadweight tester. Pairs with the Type T weight set sized to the 0.10 in² piston area to generate the corresponding pressure range.

Cal Cup for ESM-01 Diffusion Sensors, Fixed Systems (Not for Cl2 or NH3)

Cal Cup for ESM-01 Diffusion Sensors, Fixed Systems (Not for Cl2 or NH3)

Case for 3 Cylinders with Foam, 58AL/103L

Case for 3 Cylinders with Foam, 58AL/103L

ADT916, Maintenance Kit for Generator