Fluke 725 Multifunction Process Calibrator

725 US Multifunction Process Calibrator

SKU: FLUKE-725 US

Fluke 725 handheld multifunction process calibrator. Sources and measures pressure (via any of 29 Fluke 700-series pressure modules), thermocouples, RTDs, mA, volts, ohms, and frequency — the single tool most process techs need to calibrate almost any process instrument. Dual display, mA source with 25 % step and automatic ramp, loop-power output, and switch-test mode make transmitter and switch calibration straightforward. Targeted at process plants, refineries, and pharmaceutical or food & beverage facilities where one technician covers a wide mix of instrumentation.

$4,331.14

List price. Volume pricing available.

Qty:

Authorized Dealer

Calibration Available

Nationwide Shipping

Expert Support

Fluke 725 Multifunction Process Calibrator calibrates almost anything & sources & measures almost all process parameters. Versatile, powerful.

Key Features

Easily source and measure process parameters
Calibrate temperature and pressure transmitters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups
Simple controls and backlit display make it easy-of-use

The Fluke 725 US Multifunction Process Calibrator # FLUKE-725 US is manufactured by Fluke. Valley Instrument Service is an authorized Fluke dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.

Have questions about this product?

Our team can help with product selection, specs, pricing, and application support.

General	Measurement Accuracy
30.000 V	0.02% + 2 counts (upper display)
100.00 mV	0.02% + 2 counts
-10.00 mV to 75.00 mV	0.025% + 1 count (via TC connector)
Current DC	24.000 mA
0.0 to 400.0 Ω	0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire)
401 to 1500 Ω	0.5 Ω (4-wire), 1 Ω (2- and 3-wire)
1500 to 3200 Ω	1 Ω (4-wire), 1.5 Ω (2- and 3-wire)
2.0 to 1000.0 CPM	0.05% + 1 count
1.0 to 1100.0 Hz	0.05% + 1 count
1.00 to 10.00 kHz	0.05% + 1 count
Sensitivity	1 V peak-to-peak-minimum
Pressure	Accuracy from 0.025% of range using any of (50) 750P pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure.
Frequency	Source Accuracy
10.000 V	0.02% + 2 counts
24.000 mA (source)	0.02% + 2 counts
24.000 mA (simulate)	0.02% + 2 counts
15.0 to 400.0 Ω	0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA)
Waveform	5 V p-p squarewave, -0.1 V offset
NI-120	0.2°C
PT-100 (385)	0.33°C
PT-100 (393)	0.3°C
PT-100 (JIS)	0.3°C
PT-200 (385)	0.2°C
PT-500 (385)	0.3°C
PT-1000 (385)	0.2°C
Resolution	0.1°C
J	0.7°C
K	0.8°C
T	0.8°C
E	0.7°C
R	1.8°C
S	1.5°C
B	1.4°C
L	0.7°C
U	0.75°C
N	0.9°C
XK	0.6°C
BP	1.2°C
Source accuracy	Accuracy stated for 4-wire measurement.
Source functions	Voltage, current, resistance, frequency, temperature
Ramps	Slow ramp, Fast ramp, 25% step-ramp
Voltage	24 V
Accuracy	10%
Maximum current	22 mA, short circuit protected
Steps	25% of range, 100% of range
Step functions	Environmental Specifications
Operating temperature	-10°C to +55°C
Storage temperature	-20°C to 71°C
Operating altitude	3000 m
Agency approvals	EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992
Size	130 x 236 x 61 mm
Weight	0.65 kg
Batteries	4 AA alkaline batteries
Battery replacement	Separate battery compartment, accessable without breaking calibration seal
Side port connections	Pressure module connector, also used for remote real-time programming

725 US Multifunction Process Calibrator

Key Features

Have questions about this product?

Related Products

154 US/CAN HART Calibration Assistant, US, Canada

700-IV Current Shunt

700TLK Process Calibration Deluxe Test Lead Kit

71X-TRAP Trap, Liquid Dirt, Generic