Family Owned & Operated Since 1971• Bakersfield, CA
Pressure, temperature, electrical, and multifunction calibrators
52455 products
Replacement Plastic Cap for Crystal Pump Systems
Replaceable Pressure Module/-14 to 300 PSI-95 to 2000 KPA-0.95 to 20 Bar
Cal Cup with 3 ft 1/8" ID x 1/4" OD Teflon Tubing, for Non Explosion Proof Air Alert and AirLink Alert Type Detectors
Cal Cup with 3 ft 1/8" ID x 1/4" OD Teflon Tubing for T2A/T3A/VOC Pro/AirLink 6900 Type Detectors
LEMO Male 6-Pin Connector for RTD100 Temperature Module
Service Kit for T-Series Pump with Buna-N O-Rings
Pressure Module, -12 to 300 (-0.8 to 20 Bar), (-80 to 2000 kPa)
Fluke 725 Multifunction Process Calibrator calibrates almost anything & sources & measures almost all process parameters. Versatile, powerful.
HART-to-USB modem for connecting Aplisens transmitters, level probes, and the APIS positioner to a PC, wired or via Bluetooth. Works with Raport 2 configuration software and EDDL/DTM libraries; Android support via Aplisens Mobile Configurator.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
A kit of 7 mini-plug connectors.
Case for GX-6000 / GX-6100 Plus Hose & Probe, Charger, AC Adapter, One Cylinder Cal Kit, and Manual
Fastcalxp Automated Gauge and Transmitter Calibration Software
Very accurate current shunt to use for verification and calibration of process control loops.
The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT.
The Fluke 700PRV consists of two relief valves (1360 and 5450 psi) to be used with the 700HTP Hydraulic Test Pump.
Fluke 71X Hose Kit — replacement hose-and-fitting set for the Fluke 718 and 719 series handheld pressure calibrators. Includes a short and a long pressure hose plus the standard 1/8" NPT fittings needed to connect the calibrator to a pressure source or to a device under test. Ships as the OEM replacement when the kit originally bundled with the calibrator is lost or damaged.
Fluke Calibration 71XTrap Liquid-Dirt Trap Shields 718, 719 & 729 Pressure Calibrators from Moisture; Protects the Pump and Hose from Contamination
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.