Ametek PMT
Process Measurement Technology — Model 40 pneumatic transmitters and controllers, electronic pressure transmitters (88C/88F/831/851), transducers (ACT/DCT/SPT/IDT), and submersible level transmitters.
Ametek PMT Submersible Level Transmitters
5 products across 5 product families
Model 375 Submersible Level Transmitter (Configurable)
Cost-effective submersible level transmitter for tanks, wells, and wastewater. 4–20 mA or 1–5 VDC output, ranges 0–6 to 0–300 PSI (to ~692 ft of water), 316L stainless steel diaphragm, a Delrin or stainless snubnose or flush sensing port, and vented polyurethane cable with a Viton seal. Cable length is specified separately. Configure sensing port, output, range, and electrical connection.
Model 575 Submersible Level Transmitter (Configurable)
Submersible pressure transmitter for liquid-level measurement in tanks, wells, sumps, and wastewater. 12–28 VDC / 4–20 mA output, ranges 0–6 to 0–300 PSI (to ~692 ft of water), with a choice of snubnose, stainless snubnose, or protected flush-cage sensing port; 316 stainless steel or Hastelloy C diaphragm; and polyurethane or Teflon cable. NSF-certified and CSA intrinsically safe versions available. Cable length is specified separately. Configure sensing port, range, electrical connection, diaphragm, and fill.
Model 675 Shark Cage Submersible Level Transmitter (Configurable)
Shark Cage submersible level transmitter — a rugged flush-diaphragm sensor inside a protective cage for debris-laden or high-flow service such as lift stations, storm water, and industrial sumps. CSA intrinsically safe. 12–28 VDC / 4–20 mA output, ranges 0–6 to 0–60 PSI, 316 stainless steel diaphragm, and vented polyurethane or Teflon cable. Cable length is specified separately. Configure pressure range and electrical connection.
Model SDT Low-Cost Submersible Level Transducer (Configurable)
Low-cost submersible level transducer for OEM and general level measurement. Wide choice of 4–20 mA or VDC outputs (including ratiometric), ranges 0–1 to 0–150 PSI, 316L stainless steel diaphragm, a Delrin or stainless snubnose, and vented polyurethane, polyolefin, or Teflon cable with a Viton seal. Optional on-board temperature output. Cable length is specified separately. Configure sensing port, output, range, electrical connection, and temperature option.
Model SST Slim-Line Submersible Level Transmitter (Configurable)
Slim-line submersible level transmitter — a narrow 0.75 in body for 1 in wells, piezometers, and tight boreholes. 11–30 VDC / 4–20 mA output, ranges 0–15 to 0–150 PSI (to ~346 ft of water), 316L stainless steel diaphragm, Delrin snubnose, and vented polyurethane cable with a Viton grommet. Cable length is specified separately. Select the pressure range; the remaining configuration is standard.
Need Help With Ametek PMT Products?
Our team is factory-trained and ready to help you select, configure, and maintain Ametek PMT instruments.
Get Expert Help