

765 Multi-Spot Temperature + Water Level Sensor
SKU: 765
Built to order. Configure below for an exact part number and quote.
Multi-spot temperature sensor with an integrated water-level sensor — combines the Rosemount 565 spot-temperature architecture with a separate water-level probe along the same sensor tube. Used for monitoring the temperature profile AND the free-water layer at the bottom of crude oil / petroleum product storage tanks (water settles below oil; the height of the water layer is custody-transfer-relevant). Up to 16 Pt-100 RTD spot elements + 1 water-level input. Stainless steel 316 housing welded to the flexible temperature sensor tube. Pairs with the Rosemount 2240S Multi-Input Temperature Transmitter (which accepts the water-level signal on its Auxiliary input).
The Rosemount 765 Multi-Spot Temperature + Water Level Sensor 0765 is manufactured by Rosemount. Valley Instrument Service supplies Rosemount equipment with full sales support and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681Configure Your Rosemount 765 Multiple Spot Temperature + Water Level Sensor
Multi-spot temperature sensor with an integrated water-level sensor — combines the Rosemount 565 spot-temperature architecture with a separate water-level probe along the same sensor tube. Used for monitoring the temperature profile AND the free-water layer at the bottom of crude oil / petroleum product storage tanks (water settles below oil; the height of the water layer is custody-transfer-relevant). Up to 16 Pt-100 RTD spot elements + 1 water-level input. Stainless steel 316 housing welded to the flexible temperature sensor tube. Pairs with the Rosemount 2240S Multi-Input Temperature Transmitter (which accepts the water-level signal on its Auxiliary input).
Required Specifications
10 of 10 selectedPDS: 765 metric range 2000-60000 mm (2-60 m, 10 mm steps) — note SHORTER than 565/566. US range 80-2300 in (1 in steps).
PDS: ANSI raised-face flanges (A-L), EN flat-face flanges (1-7), or M33×1.5 threaded (code 0). All flanges in SST AISI 316. Crude oil / petroleum tanks typically use 4-in or 6-in Class 150 RF.
PDS spot-element limits: wiring 4 → max 10 spots; wiring 3 → max 14 spots; wiring C → max 16 spots. (Water-level-only mode wiring=0 not exposed here — contact for quote.)
PDS: 01-16 spot elements distributed along the sensor length, with wiring-dependent maximums (see Sensor Wiring).
PDS: Class 1/10 (code 2) requires four-wire sensor wiring.
Standard integrated installation with Rosemount 2240S transmitter is code 00. Specify a length code for remote-mount installations: 04-10 in meters, 13-33 in feet.
PDS-real codes. Closed (C) for light products; open (H) for crude and heavy duty. Range is either 500 mm (19 in) or 1000 mm (39 in).
- Overall Length (Lo):
- M25000M25000 — 25 m (common crude tank)price on request
- Sheath Type:
- AA — 1-in AISI 316 SSTprice on request
- Tank Connection:
- GG — ANSI 4-in Class 150 RF (common crude)price on request
- Temperature Sensor Wiring:
- 44 — Four-wire (max 10 spots)price on request
- Number of Temperature Spot Elements:
- 1010 — 10 elements (max for 4-wire)price on request
- Element Type:
- PP — Pt-100price on request
- Thermometer Tolerance Class:
- 22 — 1/10 B-sp (requires four-wire)price on request
- Thermometer Temperature Range:
- 11 — 0 to +120 °C (+32 to +248 °F) (PDS: only range for 765)price on request
- Lead Wires:
- 0000 — Integrated installation with Rosemount 2240S (standard)price on request
- Water-Level Sensor:
- H05H05 — Open, crude/heavy-duty products, 500 mm (19 in) rangeprice on request
Rosemount is configurator-heavy and quote-only. Valley Instrument verifies option compatibility, lead time, and pricing before confirming your order.
Related Products

0085 Pipe Clamp Temperature Sensor
Non-intrusive pipe-clamp temperature sensor — the key piece of Rosemount X-well Technology. Wraps around the outside of a pipe with a thermally-conductive clamp to measure internal process temperature without a thermowell or process penetration. Single-element 4-wire (P1) or dual-element 3-wire (P2) silver-tip RTD, -58 to 572 °F. Pairs factory-assembled with a Rosemount 3144S / 3144P / 648 transmitter and an X-well thermal-conductivity algorithm to back-calculate the internal process temperature. Wide pipe-size selection — DN15 through DN1500 / ½-60 inch — with clamp materials in 316 SST, 304 SST, Super Duplex, and Carbon Steel.

214A Temperature Sensor (Built-to-Order)
Built-to-Order custom RTD and thermocouple sensor — the flexibility platform of the Rosemount temperature line. Industrial, Cable, Surface, and Bearing sensor designs covering applications where the standardized 214C / 214C-TC / 68Q families don't fit: surface temperature on rotating equipment bearings, cable-style sensors with flying leads or MI sheath, special-purpose mounting (bayonet, screw-in cable, DIN plate). RTD types: thin-film PT100/PT1000 (best for vibration), wire-wound PT100/PT1000 (best for accuracy). TC types: E, J, K, N, T. Multiple sheath materials, diameters, and wire-configuration options (single/dual, 2/3/4-wire RTDs, grounded/ungrounded TCs). Most configurations require a Configuration Data Sheet (CDS) at quote — the encoded options below capture the major decision points; finer details get specified during the quote process.

214C Temperature Sensor
Industry-standard temperature sensor — RTD (PT100) and thermocouple (J, K, T, N, E) variants for tough process environments. Standard outside diameter ¼-in (6 mm). Two element technologies: wire-wound (best for low-temperature accuracy, -148 to 842 °F) and thin-film (best for vibration/physical shock, high-temp up to 1112 °F). Multiple sensor mounting styles (Spring-loaded, Welded, Compact, with-indicator) for direct immersion or thermowell pairing. Single or dual 3-wire/4-wire element configurations for redundancy or 4-wire accuracy. Pairs natively with Rosemount 114C / Twisted Square thermowells and 248 / 248R / 644 / 3144P / 3144S / 648 transmitters.

214C Thermocouple Temperature Sensor
Industry-standard thermocouple sensor — the TC sibling of the 214C RTD platform. Same standard ¼-in (6 mm) OD, same mounting styles (Spring-loaded, Welded, Compact, with-indicator), same connection-head options as the RTD variant. Five thermocouple types: E (highest output, non-magnetic), J (most common, iron/constantan, -40 to 1400 °F), K (high-temp, Chromel/Alumel, up to 2192 °F), N (highest thermoelectric stability vs E/J/K/T), T (low-temp, copper/constantan, down to -321 °F). IEC 60584 Class 1 or 2 tolerance, plus ASTM E230 Special and Standard Tolerances. Pairs with Rosemount 114C / Twisted Square thermowells and 248/644/3144P/3144S/648 transmitters.
