Pressure Instruments

High Pressure Pneumatic Calibration Manifold, 21 MPa

High Pressure Pneumatic Calibration Manifold, 21 MPa

Liquid to Gas Interface, 20 MPa (3000 PSI)

Liquid to Gas Interface, 20 MPa (3000 PSI)

Liquid to Liquid Separator, 50 MPa (7000 PSI), Skydrol Use

Liquid to Liquid Separator, 50 MPa (7000 PSI), Skydrol Use

Liquid to Liquid Separator, 70 MPa (10K PSI)

Liquid to Liquid Separator, 70 MPa (10K PSI)

Pointer Remover / Punch

Pointer Remover / Punch

Two Gauge Stand, P3000 STD Adaptors

Two Gauge Stand, P3000 STD Adaptors

Magnetic Hanger Kit for Pressure Gauge

Magnetic Hanger Kit for Pressure Gauge

Quick-Test Hose, 6900 PSI / 475 Bar, 3 ft (1 M)

Quick-Test Hose, 6900 PSI / 475 Bar, 3 ft (1 M)

Union Body, 15/16-20 UNEF Male x 1/4" NPT Female

Union body, 15/16-20 UNEF male to 1/4" NPT female, for Type T deadweight tester test connections.

ADT151, Pressure Module for ADT7XX Controller, 0.01%FS Accuracy with Dual-Range Calibration, Range 1: -15 to 100 PSI (-1 to 7 Bar), Range 2: -15 to 50 PSI (-1 to 3.5 Bar)

4 inH2O to PSI Conversion Ring for PK II DWT (Small)

Conversion ring for PK II pneumatic deadweight tester — converts 4 inH2O range to PSI. Small weight-carrier interface.

T-656 Pump Rebuild Kit for T-620 / T-620H

Pump rebuild kit for T-620 and T-620H hydraulic hand pumps.

PK II Individual Weight, 0.1 PSI, Aluminum

Individual weight for the PK II pneumatic deadweight tester, providing a 0.1 PSI pressure increment; aluminum construction.

ADT155, Pressure Module, -10 to 10 PSI (-0.7 to 0.7 Bar), 0.01%FS Accuracy

M12 x 1 Mating Cable, Female Angle x Cable, 4-Pin, 2 m

M12 x 1 mating connector cable for NOSHOK transducers and switches: female angle x cable, 4-pin, 2 m length.

Individual Weight for Type T DWT, 0.5 lb, Alloy

Individual 0.5 lb weight for Type T hydraulic deadweight tester. Produces 5 PSI on WG-89 (0.10 in²), 10 PSI on WG-90 (0.05 in²), 25 PSI on WG-91 (0.02 in²), 50 PSI on WG-92 (0.01 in²) piston/cylinder assemblies. Alloy construction.

Weight Set for PK II DWT, 1 to 20 PSI, Stainless Steel

Stainless steel weight set for PK II pneumatic deadweight tester, 1 to 20 PSI range. Contains 2× 1 PSI, 1× 2 PSI, 3× 5 PSI weights. Pairs with the PK2-20-SS range model. NIST traceable with standard or local gravity calibration.

Type T Comparator Test Gauge, 0 to 30 PSI, Monel Internals, 9/16-18 Lower Mount

0 to 30 PSI range, Monel internals, 9/16-18 lower mount, ±0.250% F.S. accuracy (standard). Replacement/additional bare gauge for Type T hydraulic comparator — no fitting or o-rings.

Pressure Switch Test Lead Kit - for Use with 7XX Pressure Controllers

Carrying Case for Type T/R Pump and Tools

Carrying case for Type T and Type R hydraulic deadweight tester pump and tools.

Union Body, 15/16-20 UNF Male x 9/16-18 UNF Female for 1424 Gauges

Union body, 15/16-20 UNF male to 9/16-18 UNF female, for connecting Type T comparator pumps to 1424-style test gauges.

Model 517 Steel Siphon, 1/4 in NPT

Coil siphon in steel, 1/4-18 NPT — traps a liquid seal that protects the gauge from steam and hot process media. Rated 500 PSI / 400 F maximum. AMETEK drawing AH-233.

1-1/2" ANSI 150# RF Flange, for PTI Transmitters

Flange only, 1-1/2" ANSI 150# raised face, for NOSHOK PTI20/PTI30 flush-diaphragm transmitters.

ADT912, Test Kit for ADT912-B (Hose Barb Fitting, Hose, Etc) 1/4 BSP M