3 Yr Gold Support, DSX with Multimode OLTS Inspection
SKU: GLD3-DSX-5000MI
Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.
List price. Volume pricing available.
Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.
Key Features
- Key measurements – Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.
- Sequence measurement mode – Automatic or manual sequence testing of battery strings with automatic measurement storage including voltage, resistance and temperature (with BTL21 intelligent test probe), eliminating the need to press a button each time a measurement needs to be saved.
- Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis.
The Fluke Networks 3 Yr Gold Support, DSX with Multimode OLTS Inspection # GLD3-DSX-5000MI is manufactured by Fluke Networks. Valley Instrument Service is an authorized Fluke Networks dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| 3 mΩ | 0.001 mΩ |
| 0.01 mΩ | 0.8% + 6 |
| 300 mΩ | 0.1 mΩ |
| 3000 mΩ | 1 mΩ |
| 6 V | 0.001 V |
| 60 V | 0.01 V |
| 600 V | 0.1 V |
| 1000 V | 1 V |
| VAC (45 Hz to 500 Hz with 800 Hz filter) | 600 V |
| Frequency (displayed with VAC and AAC)2 | 500 Hz |
| 600 mV | 0.1 mV |
| 6000 mV | 1 mV |
| ADC/AAC (with accessory Fluke i410) | 400 A |
| Temperature | 0°C to 60°C |
| Meter mode | 999 records for each measurement position with time stamp |
| Sequence mode | Up to 100 profiles and 100 profile templates (Each profile stores up to 450 batteries) with time stamp |
| AC voltage ripple (20 KHz Max) | 1. The measurement is based on AC injection method. The injected source signal is 2. Trigger level VAC: 10 mV, AAC: 10 A |
| Measurement Modes | BT510 |
| Resistance (mΩ) | ● |
| Battery voltage | ● |
| Voltage DC | ● |
| Voltage AC and frequency (Hz) | ● |
| Ripple volt | ● |
| DMM mode | ● |
| Discharge measurement mode | ● |
| Automatic measurement save | ● |
| Memory view | ● |
| Size (H x W x D) | 22 x 10.3 x 5.8 cm (9 x 4 x 2 in) |
| Weight | 850 g (1.9 lb) |
| Screen dimensions | 7.7 x 5.6 cm (3 x 2.2 in) |
| Interface | USB mini |
| Warranty | 3 years |
| Long angled probe (overall length) | 242.2 cm (95.38 in) |
| Short angled probe (overall length) | 216.8 cm (85.38 in) |
| Overall span (coil relaxed) | 10.1 cm (4 in) |
| Overall maximum span (coil extended) | 109.2 cm (43 in) |
| BTL20ANG probe tip angle | 20 degrees from horizontal |
| Operating temperature | 0°C to 40°C |
| Storage temperature | -20°C to 50°C |
| Lithium-ion battery charging temperature | 0°C to 40°C |
| Operating humidity | ≤ 80% RH (at 10°C to 30°C) |
| Operating altitude | Sea level to 2000 meters |
| Storage altitude | Sea level to 12,000 meters |
| IP rating | IP40 |
| Radio | FCC Class A |
| Vibration requirements | MIL-PRF-28800F: Class 2 |
| Drop test requirements | 1 meter |
| Temperature coefficients | Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C |
| Safety compliance | 600 V CAT III |
| EMC | IEC 61326 |
| ROHS | China, Europe |
| Protection class 2 | Pollution Degree II |
| Battery compliance | 2 G per IEC68-2-26, 25 G, and 29 |
Related Products
0.3 M Singlemode Test Reference Cord, MPO APC/MPO APC, Unpinned/Unpinned, Type A
Singlemode fiber optic test reference cord with MPO APC connectors (unpinned/unpinned, Type A polarity). 0.3 m length for Tier 1 optical loss testing with MultiFiber Pro or CertiFiber Pro.
087724767001 TS30/120 Angl/Pin
087724767001 TS30/120 Angl/Pin
1 GHz DSX CableAnalyzer V2
Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.
1 GHz DSX Quad OLTS Insp V2, with Wi-Fi
Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.