
- 2 DSX-5000 CableAnalyzer Modules
- 2 CertiFiber Quad OLTS Modules
Versiv certification kit with Wi-Fi: Versiv mainframe and remote with two DSX-5000 CableAnalyzer modules, two CertiFiber Quad OLTS modules, Cat 6A/Class EA permanent link and channel adapters, and a USB video inspection probe. The DSX-5000 certifies twisted pair cabling from Cat 5e through Cat 6A and Class FA to IEC Level V accuracy, to 1000 MHz. Part of the Versiv cabling certification family: jobs are set up with the ProjX management system, and test results transfer and consolidate in LinkWare PC Cable Test Management Software.
Software and firmware note: Versiv2 firmware 7.2 (October 2026) requires LinkWare PC 12.1 Build 14 or later. Firmware 7 and later is not compatible with original Versiv (V1) mains and remotes, Versiv TFS mains, or the DSX-600, whose final firmware release is 6.14 Build 9. If your team pairs this tester with any of those units, do not update past 6.14. Ask us before updating and we will confirm the right firmware for your kit.
The Fluke Networks 1 GHz DSX Quad OLTS Insp V2, with Wi-Fi DSX2-5000QI is manufactured by Fluke Networks. Valley Instrument Service is an authorized Fluke Networks dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| 3 mΩ | 0.001 mΩ |
| 0.01 mΩ | 0.8% + 6 |
| 300 mΩ | 0.1 mΩ |
| 3000 mΩ | 1 mΩ |
| 6 V | 0.001 V |
| 60 V | 0.01 V |
| 600 V | 0.1 V |
| 1000 V | 1 V |
| VAC (45 Hz to 500 Hz with 800 Hz filter) | 600 V |
| Frequency (displayed with VAC and AAC)2 | 500 Hz |
| 600 mV | 0.1 mV |
| 6000 mV | 1 mV |
| ADC/AAC (with accessory Fluke i410) | 400 A |
| Temperature | 0°C to 60°C |
| Meter mode | 999 records for each measurement position with time stamp |
| Sequence mode | Up to 100 profiles and 100 profile templates (Each profile stores up to 450 batteries) with time stamp |
| AC voltage ripple (20 KHz Max) | 1. The measurement is based on AC injection method. The injected source signal is 2. Trigger level VAC: 10 mV, AAC: 10 A |
| Measurement Modes | BT510 |
| Resistance (mΩ) | ● |
| Battery voltage | ● |
| Voltage DC | ● |
| Voltage AC and frequency (Hz) | ● |
| Ripple volt | ● |
| DMM mode | ● |
| Discharge measurement mode | ● |
| Automatic measurement save | ● |
| Memory view | ● |
| Size (H x W x D) | 22 x 10.3 x 5.8 cm (9 x 4 x 2 in) |
| Weight | 850 g (1.9 lb) |
| Screen dimensions | 7.7 x 5.6 cm (3 x 2.2 in) |
| Interface | USB mini |
| Warranty | 3 years |
| Long angled probe (overall length) | 242.2 cm (95.38 in) |
| Short angled probe (overall length) | 216.8 cm (85.38 in) |
| Overall span (coil relaxed) | 10.1 cm (4 in) |
| Overall maximum span (coil extended) | 109.2 cm (43 in) |
| BTL20ANG probe tip angle | 20 degrees from horizontal |
| Operating temperature | 0°C to 40°C |
| Storage temperature | -20°C to 50°C |
| Lithium-ion battery charging temperature | 0°C to 40°C |
| Operating humidity | ≤ 80% RH (at 10°C to 30°C) |
| Operating altitude | Sea level to 2000 meters |
| Storage altitude | Sea level to 12,000 meters |
| IP rating | IP40 |
| Radio | FCC Class A |
| Vibration requirements | MIL-PRF-28800F: Class 2 |
| Drop test requirements | 1 meter |
| Temperature coefficients | Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C |
| Safety compliance | 600 V CAT III |
| EMC | IEC 61326 |
| ROHS | China, Europe |
| Protection class 2 | Pollution Degree II |
| Battery compliance | 2 G per IEC68-2-26, 25 G, and 29 |
This product is part of a family with 3 models. Select a model below to view details.
| Model | Price | |
|---|---|---|
DSX2-5000QICurrent | $28,398.58 | Viewing |
DSX2-8000QI-NW | $29,408.72 | View Details → |
DSX2-8000QI | $29,408.72 | View Details → |
Related Products

1 GHz DSX-5000 and Quad OLTS Modules Add-on Kit with V2 Remote
1 GHz DSX-5000 and Quad OLTS Modules Add on Kit w/V2 Remote

2 GHz DSX Multimode OLTS Inspc V2, with Wi-Fi
2 GHz DSX Multimode OLTS Inspc V2, w/Wi-fi

2 GHz DSX and Quad OLTS Modules Add on Kit with V2 Remote
2 GHz DSX and Quad OLTS Modules Add on Kit w/V2 Remote
CFM Singlemode Main/Remote Output Adapter
CFM Sm Main/Remote Output Adapter

