FEV150 EV Charging Station Analyzer (Meter Only)
SKU: FLK-FEV150/BASIC
All-in-one EV charging station analyzer for safety and performance testing of AC Level 1 and Level 2 chargers. Control pilot signal analysis, GFCI trip test, voltage, current, and power measurements. Connectors sold separately.
List price. Volume pricing available.
Test the safety and functionality of AC electrical vehicle charging stations with the all-in-one tool that is safe, portable, and easy to use.
Key Features
- Streamline setup with TruTest bi-directional test plan upload and results sync
- Run GFCI trip tests to verify EVSE safety performance
- Get clear pass/fail test results for faster troubleshooting and reporting
- Use auto control pilot (CP) with waveform analysis to validate communication signals
- Save time with automated test sequences and customizable workflows
The Fluke FEV150 EV Charging Station Analyzer (Meter Only) # FLK-FEV150/BASIC is manufactured by Fluke. Valley Instrument Service is an authorized Fluke dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| Test/function | Display Range |
| Touch voltage, safe range | ≤50 V ac/dc |
| Touch voltage, dangerous range | >50 V ac/dc |
| Visual inspection checklist | · |
| 30 mA, trip time limit: 0.56 s | Test current: 0% to 10% |
| Trobouble shooting 6 mA GFCI | 3.5 mA, no trip |
| Trobouble shooting 20 mA GFCI | 6 mA, no trip |
| L1-L2/N | 0 V ac to 280 Vac |
| Frequency | 40.00 Hz to 70.00 Hz |
| -15.000 V to15.000 V | -15.000 V to-2.000 V,2.000 V to15.000 V |
| PWM duty cycle | 2.0 % to 98.0 % |
| Current indication | 0.0 A to 80.0 A |
| A, B, C, D | -- |
| x1, x2 | -- |
| A | -- |
| B | -- |
| C | -- |
| D | -- |
| PE error (earthfault/PE open) | Pass/Fail |
| CP error E | Pass/Fail |
| Diode short | Pass/Fail |
| Error D | Pass/Fail |
| PP resistor measurementType 1 with cable (S3, R6, R7) | 50.0 Ω to 499.9 Ω,500 Ω to 5000 Ω |
| CP resistor measurement (R1) | 800 Ω to 1200 Ω |
| Fault simulation | [1] According to IEC 61851-1.[2] According to table A.8 of IEC 61851-1. |
| Input elctrical ratings | 250 V max50/60 Hz, max 1 A |
| EV connector | SAE J1772 socket (type 1, 5P single-phase) |
| Internal power consumption | 3W max |
| Size (H x W x D) | ∼(263 mm x 123 mm x 63 mm)∼(10.35 in x 4.84 in x 2.48 in) without the TY1 |
| Weight | ∼0.9 kg, without the TY1 connector∼1.4 kgn with the TY1 connector |
| Battery | 4 x AA/IEC LR6 alkaline or IEC HR6 NiMH |
| Operating | -10 °C to 40 °C (14 °F to 104 °F) |
| Storage | -20 °C to 50 °C (-4 °F to 122 °F) |
| Altitude | 3000 m |
| Ingress protection | IP40 |
| Frequency range | 2400 MHz to 2483.5 MHz |
| Output power | <100 mW |
| Safety | IEC 61010-1: Pollution Degree 2, IEC 61010-2-030, CAT II 300 V, Protection Class II |
| International | IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class AGroup 1: Equipment has intentionally generated and/or uses conductively-coupled radiofrequency energy that is necessary for the internal function of the equipment itself.Class A: Equipment is suitable for use in all establishments other than domestic and those directlyconnected to a low-voltage power supply network that supplies buildings used for domesticpurposes. There may be potential difficulties in ensuring electromagnetic compatibility in otherenvironments due to conducted and radiated disturbances.Caution: This equipment is not intended for use in residential environments and may not provideadequate protection to radio reception in such environments. Emissions that exceed the levelsrequired by CISPR 11 can occur when the equipment is connected to a test object. |
| USA (FCC) | 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. |
This product is part of a family with 6 models. Select a model below to view details.
| Model | Price | |
|---|---|---|
FLK-FEV150/BASICCurrent | $2,599.99 | Viewing |
FLK-FEV150/TY1/TSL | $3,327.99 | View Details → |
FLK-FEV150/TY1/FPC | $3,444.99 | View Details → |
FEV150/TY1 PRO | $3,431.99 | View Details → |
FLK-FEV150/TY1 | $3,119.99 | View Details → |
FEV150/TY1/TSL PRO | $3,639.99 | View Details → |
Related Products
1662 SCH Installation Tester with Mem Schuko
Installation Tester with Mem Schuko
1663 Installation Tester with RCD Type B (US)
Multifunction installation tester with RCD Type B testing. Tests to local regulations and provides results for complete documentation. US (NEMA) plug.
166X Main Test Cord, North America
Replacement main test cord for Fluke 1660 series multifunction installation testers. North America version.
1672 Installation Tester with TruTest Software (Schuko)
Multifunction installation tester with TruTest reporting software. Insulation resistance, loop/line resistance, voltage, frequency, and polarity testing. Schuko (CEE 7/7) plug.