80I-2010S 2, 000A AC/DC Current Clamp
SKU: 80I-2010S
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
List price. Volume pricing available.
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
Key Features
- Current Range: 0.1 to 100A DC or 0.1 to 100A AC
- Basic Accuracy (DC to 1kHz):100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading
- Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
- Bandwidth: 1Hz to 20kHz
- Working Voltage: 600V AC rms
- Maximum Conductor Size: 11.8 mm (.46 inch) diameter
- Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
The Fluke 80I-2010S 2, 000A AC/DC Current Clamp # 80I-2010S is manufactured by Fluke. Valley Instrument Service is an authorized Fluke dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| General | Specifications |
| Nominal current range | 100 A, AC/DC |
| Continuous current range | 1 A - 100 A AC/DC |
| Maximum non-destructive current | 140 A - 2 kHz |
| Lowest measurable current | 0.1 A |
| Basic accuracy | 10 mV/A setting: 50 mA to 40 A ±4% of reading +50 mA |
| Useable frequency | DC - 100 kHz |
| Output level(s) | 100 A range: 10 mV/A |
| Zero error adjustment | Yes |
| Safety | CAT III, 300 V |
| Maximum voltage | 600 V |
| Warranty | 1 year |
| Battery life | 9 V, 55 h |
| Maximum conductor diameter | 11.8 mm |
| Output cable length | 1.6 m |
| BNC adapter | Yes |
This product is part of a family with 2 models. Select a model below to view details.
| Model | Price | |
|---|---|---|
80I-2010SCurrent | $1,319.99 | Viewing |
80I-2010S/3PK | $3,819.99 | View Details → |
Related Products
116/323 KIT HVAC Multimeter and Clamp Meter Combo Kit
Get the right HVAC multimeter for accurate temperature & microamp measurements. The Fluke 116 digital multimeter has everything you need in an HVAC meter.
17XX I40S-EL Clamp-on Current Transformer
The Fluke i40s-EL Current Clamp-on Transformer is used for low current measurement; suitable for making measurements up to 40A, and also measures accurately on 1A and 5A secondary current transformers.
301D-R 600A AC/DC Clamp Meter with Slim Body and Thin Jaw Arm Retail
The slim and thin jaw can easily fit into tightly packed wires. The lightweight and compact design allows you to carry it around in your pocket
301D/ESP 600A AC/DC Clamp Meter with Slim Body and Thin Jaw Arm
The slim and thin jaw can easily fit into tightly packed wires. The lightweight and compact design allows you to carry it around in your pocket