Rice Lake

Simulator, Ranger 3 Selectable .5 MV Steps

The Ranger 3 variable range simulator is well suited for calibration needs, offering nine fixed intervals from -5 mV/V to +4.5 mV/V. • ABS plastic case, weighs less than 1 lb • Fixed rotary switch, -0.5 mV/V to 4.5 mV/V in nine steps of 0.5mV/V per step • Ideal tool for calibrating the indicator A/D offset and gain setting • A/D calibration steps for -0.5 mV/V for offset and 4.5 mV/V for gain • Used in troubleshooting and testing systems

Simulator, Ranger 5 Selectable .5 MV Steps w/ Vernier

The Ranger 5 variable range simulator is a full-functioning simulator, well suited for more advanced troubleshooting and calibration needs. • ABS plastic case, weighs less than 1 lb • Fixed rotary switch, -0.5 mV/V to 4.5 mV/V in nine steps of 0.5 mV/V per step • 10-turn vernier knob with locking graduated dial • Vernier selection of four ranges: Off, Fine, Medium and Coarse • Ideal tool for calibrating indicator A/D offset and gain setting • A/D calibration steps for -0.5 mV/V for offset and 4.5 mV/V for gain • Used in testing, troubleshooting and calibrating digital weight indicator

Simulator, Scale-Pro 4 Transducer 0-3mV/V W/Vernier Control From -.50mV/V To +3.5mV/V Simulates 1,2,3,4 or 8 Load Cells NEMA 4X

The Transducer Simulator 4 is a fully functional simulator for replicating a wide range of load cell scenarios. An all-in-one carrying case provides the portability and convenience required by field technicians. • Designed for high accuracy • Sealed lid with neoprene O-ring • Dustproof and crush tested to 500 lb • Four operational modes include: vernier adjustment, calibrated adjustment, 0.25 mV/V offset and 0.50 mV/V offset • Ideal for setpoint or batching simulation

34 models

iQUBE² Digital Diagnostic Junction Box

Click to compare & select →

31 models

DTL Direct Thermal Label

Click to compare & select →

23 models

iQUBE³ Digital Diagnostic Junction Box

Click to compare & select →

22 models

Connectors, Shell Plugs and Receptacles

Click to compare & select →

16 models

TTL Thermal Transfer Label

Click to compare & select →

15 models

Replacement Printheads

Click to compare & select →

14 models

MaxWax GPR General-Purpose Ribbon

Click to compare & select →

13 models

Kiosk Safety Swing-away Arm

Click to compare & select →

11 models

Photo Eyes

Click to compare & select →

11 models

Relays and Racks

Click to compare & select →

11 models

TransCore Tags and Readers

Click to compare & select →

7 models

Datalogic PowerScan PD9130 Series Handheld Scanner

Click to compare & select →

7 models

Traffic Light Kits

Click to compare & select →

6 models

Amphenol RJF 544 Harsh Environment Ethernet Connection System

Click to compare & select →

6 models

HID Long Range Readers

Click to compare & select →

6 models

HID RFID Cards and Readers

Click to compare & select →

5 models

Indicator Accessories and Hardware

Click to compare & select →

5 models

JB4EP and JB4EPT TuffSeal Excitation Trim Junction Box

Click to compare & select →

5 models

JB8SP TuffSeal Signal Trim Junction Box

Click to compare & select →

5 models

Loop Detectors

Click to compare & select →

4 models

Datalogic PowerScan RF PM9100 Series Laser Scanner

Click to compare & select →

4 models

Datalogic Quickscan QD2131

Click to compare & select →

4 models

DTL Plus/DTT/DTL SYN

Click to compare & select →

4 models

Okidata 320-390-420 Turbo

Click to compare & select →

4 models

Guardian G-2 Printer Enclosure

Click to compare & select →

3 models

Datalogic QuickScan QD2590 Handheld Scanner

Click to compare & select →

3 models

Desiccants

Click to compare & select →

3 models

EL304A Signal Trim Junction Box

Click to compare & select →

3 models

EL504 Signal Trim Junction Box

Click to compare & select →

3 models

GreatTag TTT Standard Tag

Click to compare & select →

3 models

JB1010ST Signal Trim Junction Box

Click to compare & select →

3 models

JB1010T Signal/Excitation Trim Junction Box

Click to compare & select →

3 models

JB4SS TuffSeal Signal Trim Junction Box

Click to compare & select →

3 models

License Plate Recognition (LPR) Network Camera

Click to compare & select →

2 models

EL214/EL214T Cable Splicing Kit

Click to compare & select →

2 models

Image Capture/Remote Monitoring Network Camera

Click to compare & select →

2 models

JB4ES TuffSeal Excitation Trim Junction Box

Click to compare & select →

2 models

JB4SP and JB4SPT TuffSeal Signal Trim Junction Box

Click to compare & select →

2 models

Mechanical Scale Tickets

Click to compare & select →

2 models

Ranger 1 Variable Range Simulator

Click to compare & select →

2 models

Static Shielding Bags

Click to compare & select →

2 models

Zebra DS457 Fixed Mount Bar Code Scanner

Click to compare & select →

MSI CRANE CART (48.50)

Designed to hold MSI-4260, MSI-4260IS, MSI-4260M, MSI-4300, MSI-9600HT, MSI-6360 • Four swivel castors with brake • Powder coated mild steel

J-Box, Splice Single Cell FRP NEMA 4X

Board, 4 Channel ST Signal Trim w/ Expansion FM

Corrosion Inhibitor, A-HC15E 2-1/2x1-1/2 Adhesive 5CU FT Coverage

Special chemical combination provides superior protection • Protects 5 cubic ft/1.4 cubic m of enclosure volume for approximately one year • Dimensions: (W × H) 2.5 × 1.5 in (64 × 38 mm)

Intercom Kiosk FRP Enclosure, Push to Talk Includes manual

Moisture and puncture resistant speaker • Three-layer steel baffle protects speaker from tampering • Hands-free communication • Weather and vandal resistant • FRP enclosure

J-Box, JB8SPT 8 Channel Signal Trim with Expansion, Polycarbonite Nema 4 w/ transient protection

Simulator, Ranger 7 High Resolution Load Cell Simulator, With Selectable 0.01mV Steps

The Ranger 7 is the simulator of choice for precision testing. Designed for applications that require high resolutions, it features a switchable offset and two Vernier controls, along with switches that go down to 0.01 mV/V. • High resolution design • Used in high precision testing, troubleshooting and calibrating digital weight indicators • Switchable offset • Painted die-cast enclosure

HID BOX, REMOTE FRP enclosure, Includes Weigand converter, RFID reader, AC-DC power supply.

Self-contained HID reader with Weigand to RS-232 converter with power supply • Indoor/outdoor • Use with 920i, 1280 indicators and kiosk systems • Requires special programming

Enclosure, Guardian Stainless Steel Enclosure for I Class Printers (Fits old style and Mark II)

The Rice Lake Guardian printer enclosure is designed to protect printers in harsh washdown environments, such as food processing. With anti-skid feet and heavy-gauge 304 stainless steel construction, it’s a durable printing solution. • Designed to protect various printers from harsh washdown environments • Single lift-and-turn latch for easy access • Adjustable anti-skid feet for easy leveling alignment and cleaning under unit • Sliding label-access door • Heavy-gauge 304 stainless steel construction for durability

Enclosure, Poly-Guard GoDEX ZX1200i+ Printers, Washdown, With side door

Rice Lake’s POLY GUARD clear printer enclosure is designed to protect printers in food processing plants. With side door access, loading labels is simple and efficient. • Designed for use in meat and food processing plants • Cover separates from bottom • Power and data cable feed through sealed notch in back of enclosure • Side door for easy label loading

Electrostatic Discharge Protective Wrist Strap

Static Dissipative Portable Field Service Kit 8501. Includes Adjustable Wrist Band, Ground Cords, and Static-Dissipative Work Surface.

Eliminates static for safe board replacement • Connects a field service technician and the static-safe work surface to the same ground point • Harmlessly drains static charges from the body and from any conductive objects placed on the mat • Folds into a compact unit for transport and storage

Fantastock Thermal Transfer Label

Click to compare & select →

Cable Splice Kit, EL215

Designed for use in weather-exposed or direct-burial locations • Each kit contains plastic splicing tube, circuit board, insulating resin and instructions • Solder terminals