Product Image
UAT-500-T Transmitter for UAT-500 Series Underground Utility Locator
SKU: UAT-500-T
Transmitter unit for the Amprobe UAT-500 Series underground utility locating system — applies a trace signal to buried cables and metallic pipes for the UAT-500 receiver to follow.
List price. Volume pricing available.
The Amprobe UAT-500-T is the transmitter for the UAT-500 Series underground utility locating system. It applies a trace signal to a target conductor — a buried cable or metallic pipe — which the matching UAT-500 receiver then follows to trace the line and estimate its depth.
Key Features
- Transmitter unit of the UAT-500 Series underground utility locator
- Applies a trace signal to buried cables and metallic pipes
- Pairs with the UAT-500 receiver for line tracing
The Amprobe UAT-500-T Transmitter for UAT-500 Series Underground Utility Locator # UAT-500-T is manufactured by Amprobe. Valley Instrument Service is an authorized Amprobe dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Have questions about this product?
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| 3 mΩ | 0.001 mΩ |
| 0.01 mΩ | 0.8% + 6 |
| 300 mΩ | 0.1 mΩ |
| 3000 mΩ | 1 mΩ |
| 6 V | 0.001 V |
| 60 V | 0.01 V |
| 600 V | 0.1 V |
| 1000 V | 1 V |
| VAC (45 Hz to 500 Hz with 800 Hz filter) | 600 V |
| Frequency (displayed with VAC and AAC)2 | 500 Hz |
| 600 mV | 0.1 mV |
| 6000 mV | 1 mV |
| ADC/AAC (with accessory Fluke i410) | 400 A |
| Temperature | 0°C to 60°C |
| Meter mode | 999 records for each measurement position with time stamp |
| Sequence mode | Up to 100 profiles and 100 profile templates (Each profile stores up to 450 batteries) with time stamp |
| AC voltage ripple (20 KHz Max) | 1. The measurement is based on AC injection method. The injected source signal is 2. Trigger level VAC: 10 mV, AAC: 10 A |
| Measurement Modes | BT510 |
| Resistance (mΩ) | ● |
| Battery voltage | ● |
| Voltage DC | ● |
| Voltage AC and frequency (Hz) | ● |
| Ripple volt | ● |
| DMM mode | ● |
| Discharge measurement mode | ● |
| Automatic measurement save | ● |
| Memory view | ● |
| Size (H x W x D) | 22 x 10.3 x 5.8 cm (9 x 4 x 2 in) |
| Weight | 850 g (1.9 lb) |
| Screen dimensions | 7.7 x 5.6 cm (3 x 2.2 in) |
| Interface | USB mini |
| Warranty | 3 years |
| Long angled probe (overall length) | 242.2 cm (95.38 in) |
| Short angled probe (overall length) | 216.8 cm (85.38 in) |
| Overall span (coil relaxed) | 10.1 cm (4 in) |
| Overall maximum span (coil extended) | 109.2 cm (43 in) |
| BTL20ANG probe tip angle | 20 degrees from horizontal |
| Operating temperature | 0°C to 40°C |
| Storage temperature | -20°C to 50°C |
| Lithium-ion battery charging temperature | 0°C to 40°C |
| Operating humidity | ≤ 80% RH (at 10°C to 30°C) |
| Operating altitude | Sea level to 2000 meters |
| Storage altitude | Sea level to 12,000 meters |
| IP rating | IP40 |
| Radio | FCC Class A |
| Vibration requirements | MIL-PRF-28800F: Class 2 |
| Drop test requirements | 1 meter |
| Temperature coefficients | Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C |
| Safety compliance | 600 V CAT III |
| EMC | IEC 61326 |
| ROHS | China, Europe |
| Protection class 2 | Pollution Degree II |
| Battery compliance | 2 G per IEC68-2-26, 25 G, and 29 |
Accessories, replacement sensors, and parts for this product family.
Related Products
AF-600 A-Frame Fault Locator for UAT-600 Series
A-Frame fault locator accessory for the Amprobe UAT-600 underground utilities locator series. Locates cable/wire ground faults, sheath faults, and pipeline coating defects with compass guidance and numeric fault field strength indicators.
Advanced Wire Tracer with Receiver, Transmitter, Soft Carrying Case
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
Receiver, AT-6010 Wire Tracer
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
SC-600 Signal Clamp for UAT-600 Underground Utility Locator
Signal-clamp accessory for the Amprobe UAT-600 locator series — safely applies a locate signal to a cable by inducing it through the insulation into the wires or pipes, with no direct electrical contact. For low-impedance closed circuits; included with the UAT-620 kit.