Power & Energy Logger Model PEL 52 (W/LCD, w/2 MA193-10-BK Sensors, DataView Software)

The PEL 52 represents an affordable and user-friendly power and energy data logger, suitable for both single and split-phase applications. It is specifically designed for electricians, engineers, and contractors working in residential and light commercial areas. This device allows effortless measurement, recording, and analysis of crucial energy data. Generating reports is a breeze, requiring minimal configuration time and effort, with the added benefit of having standard and customizable report options available. The instrument is powered from V1 inputs from (90 to 690) V or (2) 800 mA•h NIMH batteries supply power if a source is not available. The instrument’s design enables it to be installed inside a load center panel (including the current sensors) allowing the door to close on most panels. The PEL 52 series energy loggers measure and record one or two True RMS voltage inputs up to 690 V and current inputs up to 3600 A (sensor dependent), Watts, VARS, VA and Energy (kWh and kVA). Power Factor (PF), Displacement Power Factor (DPF), and Frequency are calculated and recorded as well. All variables are recorded and stored at a one second interval and on user selectable demand intervals from 1 to 60 minutes.

The AEMC Instruments Power & Energy Logger Model PEL 52 (W/LCD, w/2 MA193-10-BK Sensors, DataView Software) # PEL 52 is manufactured by AEMC Instruments. Valley Instrument Service is an authorized AEMC Instruments dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.