Skip to content
(661) 327-8681
Valley Instrument
Rosemount 935 Open-Path Combustible Gas Detector
Rosemount

935 Open-Path Combustible Gas Detector

SKU: 935

Built to order. Configure below for an exact part number and quote.

Calibration Available
Nationwide Shipping
Expert Support

Configure Your Rosemount 935 Open-Path Combustible Gas Detector

Open-path infrared combustible-hydrocarbon-gas detector for fence-line and large-area monitoring. Continuous monitoring across paths up to 660 ft (200 m). Dual-wavelength IR analysis discriminates real combustible gas from steam, dust, fog, snow, and rain. Heated optics survive icing and condensation. SIL 2 per IEC 61508. HART output. Best where point-detector spacing would be impractical (open process areas, perimeter monitoring, LNG terminals, refineries).

Required Specifications

4 of 4 selected
1
Transmitter Range*
T1
2
Gas Calibration*
F00
3
Housing Style*
2S
4
Certifications*
A1
Rosemount 935 Open-Path Combustible Gas Detector Part Number
935T1F002SA1
Configured list price:$8,745.94Rosemount list price. Your Valley sales engineer confirms final pricing on the quote.Emerson adds a 4.9% Rosemount surcharge (effective Sep 1, 2026), about $428.55 on this configuration, as a separate line on the order.
Configuration Summary: Rosemount 935 Open-Path Combustible Gas Detector
Base: $8,745.94
Transmitter Range:
T1Transmitter - 7 to 20m range (23 to 66ft) with tilt mount
Gas Calibration:
F00Transmitter
Housing Style:
2SStainless steel ¾in NPT
Certifications:
A1ATEX and IECEx

Rosemount is configurator-heavy and quote-only. Valley Instrument verifies option compatibility, lead time, and pricing before confirming your order.

Related Products

Rosemount 628 Universal Gas Sensor # 628
Rosemount

628 Universal Gas Sensor

Smart sensor module that pairs with the Rosemount 928 Wireless Gas Monitor — tool-less hot-swappable design lets a technician replace the sensor module in the field without breaking the wireless connection or recalibrating. Available for H₂S, CO, O₂, and combination gases. Each 628 ships pre-calibrated and includes a quick-connect IP filter. Best when an installed 928 base needs to swap from one gas type to another (e.g., switching a perimeter monitor from H₂S to CO during seasonal process changes).

Request Quote →
Rosemount 928 Wireless Gas Monitor # 928
Rosemount

928 Wireless Gas Monitor

WirelessHART-powered gas monitor — detects H₂S, CO, and O₂ depletion in remote applications previously too costly to monitor with wired sensors. Pairs with the Rosemount 628 Universal Gas Sensor (tool-less hot-swappable smart sensor module). Eliminates conduit and trenching — typical install is 30 minutes vs. days for wired equivalents. SmartPower battery; 5-year operating life under typical update rates. IP66 with the Ingress Protection filter on the 628. Best for tank-farm leak monitoring, perimeter-fence early warning, and confined-space pre-entry surveillance.

Request Quote →
Rosemount 975HR Multi-Spectrum Infrared Hydrogen Flame Detector # 975HR
Rosemount

975HR Multi-Spectrum Infrared Hydrogen Flame Detector

Multi-spectrum IR flame detector specifically designed to detect both hydrocarbon AND hydrogen flames — hydrogen flames are nearly invisible and emit primarily in the UV (poor for IR-only detectors), so most IR detectors miss them. The 975HR's specialized IR sensor mix catches hydrogen-flame radiation that the 975MR misses. Critical for hydrogen-production plants, refineries with hydrogen reformers, fuel-cell manufacturing, and any process where hydrogen is present alongside hydrocarbons. SIL 2 prior-use FMEDA.

Request Quote →
Rosemount 975MR Multi-spectrum Infrared Flame Detector # 975MR
Rosemount

975MR Multi-spectrum Infrared Flame Detector

Multi-spectrum IR flame detector with QuadSense IR3 technology — analyzes the multi-spectral signals of hydrocarbon gas or liquid fires using four separate IR sensors. Detects a 1 ft² (0.1 m²) gasoline pan fire at 300 ft (90 m) — among the longest detection ranges in the 975 family. Best for outdoor large-area coverage (LNG terminals, petrochemical units, offshore platforms) where a single detector replaces multiple shorter-range UV/IR detectors. SIL 2 prior-use FMEDA.

Request Quote →