Skip to content
(661) 327-8681
Valley Instrument
Rosemount 2501 Solids Level Switch (Rotating Paddle)
Rosemount

2501 Solids Level Switch (Rotating Paddle)

SKU: 2501

Built to order. Configure below for an exact part number and quote.

Calibration Available
Nationwide Shipping
Expert Support

Configure Your Rosemount 2501 Solids Level Switch (Rotating Paddle)

Heavy-duty rotating-paddle point-level switch for bulk solids. A small motor turns a paddle inside the silo; when product covers the paddle the motor stalls and the switch trips. Works on virtually all bulk solids regardless of dielectric, electrostatic charge, or dust. Withstands extreme temperatures up to 1100°C. Best for cement, aggregates, ash, grain, and any bulk solid where vibrating or capacitance sensors fail.

Required Specifications

13 of 13 selected
1
Application*
L
2
Process Operating Temperature*
1
3
Process Operating Overpressure*
A
4
Materials of Construction: Process Connection*
A
5
Materials of Construction: Extension*
D
6
Cable Entry*
1
7
Process Connection Size*
5
8
Process Connection Rating*
NN
9
Process Connection Type*
G
10
Power Supply*
A
11
Paddle Length*
B00000
12
Product Certifications*
NA
13
Measuring Vane*
D
Rosemount 2501 Solids Level Switch (Rotating Paddle) Part Number
2501L1AAD15NNGAB00000NAD
Configured list price:from $816.41Excludes 4 selected options, which Emerson prices per configuration. Your Valley sales engineer confirms the adder on the quote.Emerson adds a 4.9% Rosemount surcharge (effective Sep 1, 2026) on the final list price, as a separate line on the order.
Configuration Summary: Rosemount 2501 Solids Level Switch (Rotating Paddle)
Base: $816.41
Application:
LFull/Empty detection in small vessel, low mechanical resistance
Process Operating Temperature:
1Max. 176 °F (80 °C)
Process Operating Overpressure:
AMax. 0.8 bar (11.6 psi)
Materials of Construction: Process Connection:
AAluminiumprice on request
Materials of Construction: Extension:
D303/304 Stainless steel (1.4301/1.4305)price on request
Cable Entry:
1M20 x 1.5 1off screwed cable gland +1 off blind plug for CE, ATEX, IEC-Ex
Process Connection Size:
51.5in. / 40mm (DN40) / 40A
Process Connection Rating:
NNFor use with non-flange process connection type
Process Connection Type:
GBSPP (G) Thread See Table Aprice on request
Power Supply:
A230 V AC 50 - 60 Hz, Motor Speed: 1 revolution per minute
Paddle Length:
B00000Standard Length 3.93in (100mm)
Product Certifications:
NANo hazardous locations certificationsprice on request
Measuring Vane:
D1.57 x 3.86in (40 x 98mm), boot-shaped vane D

Rosemount is configurator-heavy and quote-only. Valley Instrument verifies option compatibility, lead time, and pricing before confirming your order.

Related Products

Rosemount 2511 Solids Level Switch (Vibrating Fork) # 2511
Rosemount

2511 Solids Level Switch (Vibrating Fork)

Cost-effective vibrating-fork point-level switch for fine-grained and powdered solids — flour, cement, sand, plastic pellets, grain. Fork resonates at a known frequency in air; when product touches the fork the frequency drops and the switch trips. No moving parts, no calibration, immune to dust and electrostatic charge. Operates up to 150°C. Best for storage and process vessels where the 2501 paddle is over-spec and the 2521 sensitivity isn't required.

Request Quote →
Rosemount 2521 Solids Level Switch (High-Sensitivity Vibrating Fork) # 2521
Rosemount

2521 Solids Level Switch (High-Sensitivity Vibrating Fork)

High-sensitivity variant of the 2511 vibrating fork — same proven fork-resonance technology, tuned for extremely low-density bulk media (below 0.3 lb/ft³ / 5 g/L). Catches the fork frequency change even when very light powders or fluffy materials touch it. Best for low-density polymers, fluffy fines, light insulation media, and other powders where the standard 2511 might miss the trigger. Operates up to 150°C. Same process connections, fork extensions, electronics options, and approvals as the 2511.

Request Quote →
Rosemount 2535 Solids Level Switch (Vibrating Rod) # 2535
Rosemount

2535 Solids Level Switch (Vibrating Rod)

Vibrating-rod (single-tine) point-level switch for fine grains and powders — alternative to the tuning-fork 2511/2521 for media that bridge between fork tines. The single-rod geometry is harder to bridge, more reliable in clumpy or sticky powders. Operates up to 150°C. SST construction, suitable for hazardous and dusty environments. Best for fine powders prone to bridging, light solids, and any storage vessel where fork-style switches have given trouble.

Request Quote →
Rosemount 2555 Solids Level Switch (Capacitance Probe) # 2555
Rosemount

2555 Solids Level Switch (Capacitance Probe)

RF-capacitance point-level switch for low-dielectric solids and extreme-condition installations — measures the capacitance change between probe and silo wall when product covers the probe. Active Shield Technology prevents false trips from material build-up on the probe (the most common failure mode of older capacitance switches). Withstands up to 500°C, high mechanical stress, and high tensile forces. Best for low-dielectric materials (some plastics, oils on solids, low-conductivity powders) and high-temperature applications where vibrating-fork/rod 2511/2521/2535 fall outside their thermal envelope.

Request Quote →