Skip to content
(661) 327-8681
Valley Instrument
Rosemount 485 Annubar Primary Element
Rosemount

485 Annubar Primary Element

SKU: 485

Built to order. Configure below for an exact part number and quote.

Calibration Available
Nationwide Shipping
Expert Support

Configure Your Rosemount 485 Annubar Primary Element

Averaging-pitot primary element with T-shaped sensor design — measures velocity pressure across the full pipe cross-section. Up to 0.75% flow-rate accuracy, lowest permanent pressure loss of any DP flow meter, available in 2 to 96-in. (50 to 2400 mm) line sizes. Pak-Lok and flanged hot-tap installable for retrofit on operating lines. Used for liquids, gases, and steam in clean-process applications where a low-permanent-loss flow element is preferred over an orifice plate. Pairs with the 3051SMV / 4088 multivariable transmitters for compensated mass flow. (Units are built to customer-supplied pipe ID + wall dimensions; line size codes act as nominal selectors.)

Required Specifications

13 of 13 selected
1
Fluid Type*
L
2
Line Size (nominal — built to customer pipe ID)*
060
3
Pipe I.D. Range*
Z
4
Pipe Material / Mounting Assembly Material*
C
5
Piping Orientation*
H
6
Annubar Type*
P
7
Sensor Material*
S
8
Sensor Size*
2
9
Mounting Type*
T1
10
Opposite Side Support / Packing Gland*
0
11
Isolation Valve (for flo-tap models)*
0
12
Temperature Measurement*
0
13
Transmitter Connection Platform*
3
Rosemount 485 Annubar Primary Element Part Number
485L060ZCHPS2T10003
Pricing:Contact Valley Instrument for a quote on this configuration
Configuration Summary: Rosemount 485 Annubar Primary Element
Fluid Type:
LL — Liquidprice on request
Line Size (nominal — built to customer pipe ID):
060060 — 6-in. (150 mm)price on request
Pipe I.D. Range:
ZZ — Custom manufactured for customer-supplied pipe IDprice on request
Pipe Material / Mounting Assembly Material:
CC — CS (A105)price on request
Piping Orientation:
HH — Horizontal pipingprice on request
Annubar Type:
PP — Pak-Lokprice on request
Sensor Material:
SS — 316 SSTprice on request
Sensor Size:
22 — Sensor size 2 (line sizes 6-in. to 96-in. / 150-2400 mm)price on request
Mounting Type:
T1T1 — Compression or Threaded Connectionprice on request
Opposite Side Support / Packing Gland:
00 — No opposite side support or packing gland (required for pak-lok, flange-lok, and threaded models)price on request
Isolation Valve (for flo-tap models):
00 — Not applicable or customer suppliedprice on request
Temperature Measurement:
00 — No temperature sensorprice on request
Transmitter Connection Platform:
33 — Direct-mount, integral 3-valve manifold (not available with flanged > Class 600)price on request

Rosemount is configurator-heavy and quote-only. Valley Instrument verifies option compatibility, lead time, and pricing before confirming your order.

Related Products

Rosemount 1195 Integral Orifice Primary Element # 1195
Rosemount

1195 Integral Orifice Primary Element

Integral orifice primary element for small line sizes (0.5 - 1.5 in. / 15 - 40 mm) — the orifice plate is permanently mounted in a precision-machined meter body, eliminating the centering uncertainty that plagues field-installed plates. Self-centering construction. Best for lab-scale, low-flow, sample-conditioning, and pilot-plant flow measurement where standard orifice fittings are too coarse. Pairs with 3051CFP / 3051SFP / 2051CFP assembled DP flow meters. Wide material variety for chemistry compatibility.

Request Quote →
Rosemount 1495 Orifice Plate # 1495
Rosemount

1495 Orifice Plate

Standard concentric / eccentric / segmental / quadrant orifice plate — the workhorse of differential-pressure flow measurement. Precision-machined per ASME / ISO 5167 standards. Sized to your line size, beta ratio, and material requirements. Used between standard 1496 orifice flange unions for installation. Best for general-purpose flow measurement on clean liquids, gases, and steam where conditioning orifice (405C / 1595) special features aren't needed.

Request Quote →
Rosemount 1496 Orifice Flange Union # 1496
Rosemount

1496 Orifice Flange Union

Orifice flange union — paired flanges with integrated tapping points for D-D/2 or flange-tap differential pressure connections. Designed to bolt around a 1495 orifice plate (or any standard orifice plate) and provide stable, leak-free pressure-tap take-offs to the DP transmitter. Slip-on or weld-neck flanges. ANSI 150 through 1500 lb pressure ratings. Carbon steel, stainless steel, or alloy options. The standard installation hardware for orifice-plate flow measurement.

Request Quote →
Rosemount 1595 Conditioning Orifice Plate # 1595
Rosemount

1595 Conditioning Orifice Plate

Patented 4-hole conditioning orifice plate — four equally spaced orifices instead of the standard concentric single bore. The four-hole design conditions disturbed flow profiles (eddies, swirl, asymmetry from upstream pipe fittings) BEFORE measurement, eliminating the 10-50 diameters of straight run that ASME orifice plates require. Only 2 diameters upstream and 2 downstream needed — installs in tight piping where standard 1495 plates can't get enough straight pipe. Same materials and beta ratios as standard 1495 plates. Best for retrofit applications and crowded plants.

Request Quote →