BITE3 Kelvin Clip Lead Set

SKU: BI-10005

Kelvin clip lead set for the Megger BITE3 battery impedance tester — provides four-wire connection for accurate low-resistance / impedance measurements on battery posts.

$350.00

List price. Volume pricing available.

Qty:

Authorized Dealer

Calibration Available

Nationwide Shipping

Expert Support

Kelvin clip lead set for the Megger BITE3 battery impedance tester — provides four-wire connection for accurate low-resistance / impedance measurements on battery posts.

The Megger BITE3 Kelvin Clip Lead Set # BI-10005 is manufactured by Megger. Valley Instrument Service is an authorized Megger dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.

Have questions about this product?

Our team can help with product selection, specs, pricing, and application support.

This product is part of a family with 2 models. Select a model below to view details.

Model	Description	Price
Battery Impedance Test Equipment BITE5	Battery impedance tester for lead-acid (VLA and VRLA), NiCd, and lithium-ion battery banks up to 200 V DC modules. Measures individual cell voltage, impedance, and temperature to identify weak cells before failure. Touch-screen review of data on-site — evaluate cells or trend string performance, make repairs, and re-test in one trip. Pairs with the Torkel discharge test set for impedance measurement during capacity testing.	$4,210.00	View Details →
Advanced Battery Impedance Test Equipment BITE5-ADV	Advanced version of the BITE5 — tests battery modules up to 500 V DC (vs 200 V on the standard BITE5), measures inter-cell strap resistance with higher test current to find poor or corroded connections, and tests parallel strings without isolating segments. RFID tag reader for rapid battery identification. Touch-screen review on site for lead-acid, NiCd, and lithium-ion battery banks.	$7,535.00	View Details →

Accessories, replacement sensors, and parts for this product family.

Model	Description	Price
BITE5 Extension Kit, 3 m Right-Angle Probe (Model A) 1016-068	BITE5 extension kit for Model A — includes the 2016-553 lighted extension with roll-up bag and a 3 m right-angle concentric probe (90041-193). Note: Model A probes (90041 series) are not interchangeable with Model B/Advanced probes (90043 series) — verify your BITE5 model before ordering.	$435.00	View Details →
BITE5 Extension Kit, 3 m Right-Angle Probe (Model B and Advanced) 1016-064	BITE5 extension kit for Model B and BITE5 Advanced — includes the 2016-553 lighted extension with roll-up bag and a 3 m right-angle concentric probe (90043-244).	$455.00	View Details →
BITE5 Extension Kit, 3 m Straight + Right-Angle Probes (Model A) 1016-070	BITE5 extension kit for Model A — most-complete Model A bundle. Includes the 2016-553 lighted extension with roll-up bag, a 3 m right-angle concentric probe (90041-193), and a 3 m straight concentric probe (90041-194). Note: Model A probes (90041 series) are not interchangeable with Model B/Advanced probes (90043 series) — verify your BITE5 model before ordering.	$730.00	View Details →
BITE5 Extension Kit, 3 m Straight + Right-Angle Probes (Model B and Advanced) 1016-067	BITE5 extension kit for Model B and BITE5 Advanced — most-complete Model B/Advanced bundle. Includes the 2016-553 lighted extension with roll-up bag, a 3 m right-angle concentric probe (90043-244), and a 3 m straight concentric probe (90043-245).	$780.00	View Details →
MCV-100B5 100 A AC Current Transformer for Ripple Current Measurement	100 A AC current transformer for measuring and recording AC ripple current with the Megger BITE5 battery impedance tester. 0.96 in (24 mm) jaw inside diameter for clamp-on installation around battery interconnect cables.	$138.00	View Details →
MCV-100B5B 100 A AC Current Transformer for Ripple Current Measurement (BITE5 Model B)	100 A AC current transformer for measuring AC ripple current with the Megger BITE5 battery impedance tester (Model B and Advanced only). Companion to MCV-100B5 which fits the Model A connector.	$245.00	View Details →
MCCV-1KDC-B5 1000 A AC/DC Current Clamp (BITE5 Model A)	1000 A AC/DC current clamp for DC float-current and discharge-current measurements with the Megger BITE5 battery impedance tester (Model A connector). Companion to MCCV-1KDC-B5B which fits the Model B and Advanced connector.	$820.00	View Details →
MCCV-1KDC-B5B 1000 A AC/DC Current Clamp (BITE5 Model B and Advanced)	1000 A AC/DC current clamp for DC float-current and discharge-current measurements with the Megger BITE5 battery impedance tester (Model B and Advanced connector). Companion to MCCV-1KDC-B5 which fits the Model A connector.	$835.00	View Details →
BITE3 Dual-Point Lead Set PBI-10002	Dual-point lead set for the Megger BITE3 battery impedance tester. Resale accessory pack.	$985.00	View Details →
BITE3 Hard-Sided Carrying Case 35890	Hard-sided carrying case for the Megger BITE3 battery impedance tester. Foam-lined for instrument and standard accessory storage.	$980.00	View Details →
BITE3 Kelvin Clip Lead SetCurrent BI-10005	Kelvin clip lead set for the Megger BITE3 battery impedance tester — provides four-wire connection for accurate low-resistance / impedance measurements on battery posts.	$350.00	Viewing
BITE3 Lighted Probe Extensions 35865	Lighted probe extensions for the Megger BITE3 battery impedance tester — illuminate the probe tip area for clearer cell-terminal contact in poorly lit battery rooms.	$515.00	View Details →
BITE3 RS-232 Null Modem Cable 33533-1	RS-232 null modem cable for connecting the Megger BITE3 battery impedance tester to a PC for data download.	$28.00	View Details →
BITE3 Split-Core CT with Extension Cable 35873	Split-core current transformer with extension cable for the Megger BITE3 battery impedance tester — simplifies clamp-on current measurement around bus bars and parallel strings.	$840.00	View Details →
BITE3/BITE5 Replacement Probe Tip Kit BI-10017	Replacement probe tip kit for the Megger BITE3 and BITE5 battery impedance testers. Includes a set of replacement concentric probe tips for restoring connection quality on worn or damaged probes.	$67.00	View Details →
BITE5 Lighted Extension Kit (Model A and B, No Probes) 2016-553	Lighted extension with roll-up bag — base BITE5 accessory kit, no probes included. Compatible with both Model A and Model B BITE5 testers. For probe-bundled kits, see 1016-064 / 1016-067 (Model B + Advanced) or 1016-068 / 1016-070 (Model A).	$425.00	View Details →

Related Products

Megger

3 m 90 Degree Concentric Probe (Model B)

3 M 90 Degree Concentric Probe (Model B)

$410.00

Megger

8-Channel Data Logger for Digital Hydrometer Kit

Standalone 8-channel data logger for the Megger Digital Hydrometer Kit (2001-692). Holds 8 separate sets of specific-gravity and temperature test data and imports directly into Megger Power DB battery reports. Sold separately for replacement or as an additional logger. Includes data logger unit, custom carrying case, communications cable, software CD, and ERRATA sheet for programming the hydrometer.

$3,295.00

Megger

9 m (30 ft) Sync Cable

9 M (30 ft) Sync Cable

$190.00

Megger

BITE2 Charger Cable

$90.00