Family Owned & Operated Since 1971• Bakersfield, CA
Testex Precision Plastic Shim Set of 4 - for Testex Micrometer
Precision Plastic Shims - Set of 5 (Non-Certified)
Certified Plastic Shim (Single Shim) - 1500 µm (60 mil)
Certified Plastic Shim (Single Shim) - 1000 µm (40 mil)
Certified Plastic Shim (Single Shim) - 500 µm (20 mil)
Certified Plastic Shim (Single Shim) - 250 µm (10 mil)
Certified Plastic Shim (Single Shim) - 125 µm (5 mil)
Certified Plastic Shim (Single Shim) - 75 µm (3 mil)
Certified Plastic Shim (Single Shim) - 50 µm (2 mil)
Certified Plastic Shim (Single Shim) - 25 µm (1 mil)
Small uncoated steel zero plate for coating thickness gages. Confirms the gage reads zero on steel, and gives shims a flat base.
Small uncoated aluminum zero plate for coating thickness gages. Confirms the gage reads zero on non-ferrous metal, and gives shims a flat base.
Testex Certified Shim Set (2) - (Set of 2) with Certificate
Medium uncoated steel zero plate for coating thickness gages. Confirms the gage reads zero on a ferrous substrate, and gives shims a flat base.
Medium uncoated aluminum zero plate for coating thickness gages. Confirms a correct zero reading on non-ferrous metal, and gives shims a flat base.
PosiTector SPG Certified Shim Set - (Set of 3) with Certificate
Certified Block Standards P8 - for Coating Thickness Gages
Certified Block Standards P7 - for Coating Thickness Gages
Certified Block Standards P6 - for Coating Thickness Gages
Certified Block Standards P5 - for Coating Thickness Gages
Certified Block Standards P4 - for Coating Thickness Gages
Certified Block Standards P3 - for Coating Thickness Gages
Certified Block Standards P2 - for Coating Thickness Gages
Certified Block Standards P1 - for Coating Thickness Gages
Large uncoated steel zero plate for coating thickness gages. Confirms a correct zero reading on steel and gives shims a wider flat base.
Certified Plastic Shims - (Set of 8) with Certificate
Certified Standards S4 - fe - for Coating Thickness Gages
Certified Standards S3 -fe - for Coating Thickness Gages
Certified Standards S2 -fe - for Coating Thickness Gages
Certified Standards S1 -fe - for Coating Thickness Gages
Certified Standards A3 Non-Ferrous - for Coating Thickness Gages
Certified Standards A2 Non-Ferrous - for Coating Thickness Gages
Certified Standards A1 Non-Ferrous - for Coating Thickness Gages
Certified Step Block B1 (Inch) - for Ultrasonic Thickness Gages
Certified Thin Step Block - for PosiTector UTG P
Certified Step Block B1M (Metric) - for Ultrasonic Thickness Gages
PosiTector SPG Certified Standards - for Depth Micrometers
Certified High Range Inch Step Block - for Ultrasonic Thickness Gages
Certified High Range Metric Step Block - for Ultrasonic Thickness Gages