Calibration

ADT992, Handpump, Pneumatic Pressure Test Generator, -14 to 700 PSI (-0.95~50) Bar, 1/4BSP F

ADT997, Handpump, Hydraulic Pressure Test Generator, 0 to 10000 PSI (0~700) Bar, 1/4BSP F

Pressure Calibrator, NPT, PM200-BG200K/BG2.5K, 200 kPa (30 PSI)

Pressure Calibrator, NPT, PM200-BG200K/BG2.5K, 200 kPa (30 PSI)

717 30G Pressure Calibrator, 30 PSIG

The handheld Fluke 717 Pressure Calibrator delivers outstanding performance, durability & reliability. Get details and specs here. Your solution awaits.

ADT925W, Handheld Hydraulic Pressure Test Pump, for Use with Water, 6000 PSI, 1/4BSP F

ADT993, Handpump, Pneumatic Pressure Test Generator, -14 to 1000 PSI (-0.95~70) Bar, 1/4BSP F

Gas Deadweight Tester, 10 Bar, w/ Pump

Gas Deadweight Tester, 10 Bar, w/ Pump

Gas Deadweight Tester, Dual VAC/Pressure 35 Bar, No Pump

Gas Deadweight Tester, Dual VAC/Pressure 35 Bar, No Pump

Gas Deadweight Tester, Liquid Lubricated, 70 Bar

Gas Deadweight Tester, Liquid Lubricated, 70 Bar

Gas Deadweight Tester, Liquid Lubricated, 140 Bar

Gas Deadweight Tester, Liquid Lubricated, 140 Bar

Oil Deadweight Tester, 35 Bar

Oil Deadweight Tester, 35 Bar

RTCt-168 Reference Temperature Calibrator, -30°C to 165°C

The RTCt-168 is the sanitary-sensor specialist: a combined dry-block and liquid bath spanning -30°C to 165°C, built for high-speed, high-volume calibration of the flange and sanitary sensors common in pharmaceutical and food and beverage plants, with accuracy down to ±0.045°C using an external reference sensor.

ADT959A, Hydraulic Ultra-High Pressure Test Pump, 40000 PSI (2800 Bar), Autoclave F-250-C, 9/16" -18 UNF Female

Crystal APM Advanced Pressure Module, 3,000 PSI

APM Advanced Pressure Module, 3,000 PSI

Full Immersion PRT, 50 mm, INFO-CON (914X)

Full Immersion PRT, 50 mm, INFO-CON (914X) termination, Plugs into 9142/9143/9144 Field Metrology Well -P built-in readout

Ralston ControlPak Pressure Controller, 1/8MNPT, 1/4MNPT, 1/4FNPT Gauge Conn., 6ft and 3ft Hoses

ControlPak Pressure Controller, 1/8MNPT, 1/4MNPT, 1/4FNPT Gauge Conn., 6ft and 3ft Hoses

Kit Including a GP-03 with Alkaline Batteries, Screwdriver, Case, and Calibration Kit

Kit Including a GP-03 with Alkaline Batteries, Screwdriver, Case, and Calibration Kit (34L Cyl 50% LEL CH4/Air, Regulator, Cal Cup & Tubing)

Cal Kit, GX-3R Pro, 34AL Cylinder H2S 25 PPM / CO 50 PPM / CH4 50% LEL / O2 12% in N2, 34L Cylinder 5,000 PPM CO2 in N2, Two Regulators 0.25 LPM, Case & Tubing

Cal Kit, GX-3R Pro, 34AL Cylinder H2S 25 PPM / CO 50 PPM / CH4 50% LEL / O2 12% in N2, 34L Cylinder 5,000 PPM CO2 in N2, Two Regulators 0.25 LPM, Case & Tubing

ADT286, Multifunction Reference Thermometer Readout (Base Unit Only) 110V

Crystal 30 Series Single-Sensor Pressure Calibrator, 16 PSI

30 Series Single-Sensor Pressure Calibrator, 16 PSI

Crystal CrystalCalHP Automated Gauge Calibration System, BSP CPF Fittings

Turnkey 15,000 PSI gauge calibration system with BSP CPF fittings — includes GaugeCalHP pump, FastCalXP software, fine adjust, footswitch, carrying case, USB adapter, rebuild kit; pressure standards not included (sold separately)

Precision RTD Freezer Probe, 6 in, Bare Wire

Precision RTD Freezer Probe, 6 in, Bare Wire termination

Oil Deadweight Tester, 140 Bar

Oil Deadweight Tester, 140 Bar

Oil Deadweight Tester, 350 Bar

Oil Deadweight Tester, 350 Bar