Calibration

71X-TRAP Trap, Liquid Dirt, Generic

Fluke Calibration 71XTrap Liquid-Dirt Trap Shields 718, 719 & 729 Pressure Calibrators from Moisture; Protects the Pump and Hose from Contamination

750P01EX Pressure Module, 0 to 10 Inch H2O (0 to 25 mbar), (0 to 2.5 kPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P05EX Pressure Module, 0 to 30 (0 to 2 Bar), (0 to 200 kPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P06EX Pressure Module, 0 to 100 (0 to 7 Bar), (0 to 700 kPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P09EX Pressure Module, 0 to 1500 (0 to 100 Bar), (0 to 10 MPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P24EX Pressure Module, 0 to 15 (0 to 1 Bar), (0 to 100 kPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P27EX Pressure Module, 0 to 300 (0 to 20 Bar), (0 to 2000 kPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P29EX Pressure Module, 0 to 3000 (0 to 200 Bar), (0 to 20 MPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P3IN Pressure Module, 0 to 3 Inch H2O (0 to 7.5 mbar)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750P5IN Pressure Module, 0 to 5 Inch H2O (0 to 12.5 mbar)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

750PA4EX Pressure Module, 0 to 15 (0 to 1 Bar), (0 to 100 kPa)

Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.

525A Transit Case

Transit Case

Dirt/Moisture Trap, 3.5 MPa (500 PSI)

Dirt/Moisture Trap, 3.5 MPa (500 PSI)

High Pressure Pneumatic Calibration Manifold, 21 MPa

High Pressure Pneumatic Calibration Manifold, 21 MPa

Liquid to Gas Interface, 20 MPa (3000 PSI)

Liquid to Gas Interface, 20 MPa (3000 PSI)

Liquid to Liquid Separator, 50 MPa (7000 PSI), Skydrol Use

Liquid to Liquid Separator, 50 MPa (7000 PSI), Skydrol Use

Liquid to Liquid Separator, 70 MPa (10K PSI)

Liquid to Liquid Separator, 70 MPa (10K PSI)

Pointer Remover / Punch

Pointer Remover / Punch

Two Gauge Stand, P3000 STD Adaptors

Two Gauge Stand, P3000 STD Adaptors

RTD Probe for 721 and 719PRO

RTD Probe for 721 and 719Pro

TRS1+ Calibration Standard

TRS1+ Calibration Standard

Union Body, 15/16-20 UNEF Male x 1/4" NPT Female

Union body, 15/16-20 UNEF male to 1/4" NPT female, for Type T deadweight tester test connections.

ADT151, Pressure Module for ADT7XX Controller, 0.01%FS Accuracy with Dual-Range Calibration, Range 1: -15 to 100 PSI (-1 to 7 Bar), Range 2: -15 to 50 PSI (-1 to 3.5 Bar)

4 inH2O to PSI Conversion Ring for PK II DWT (Small)

Conversion ring for PK II pneumatic deadweight tester — converts 4 inH2O range to PSI. Small weight-carrier interface.